Commit 235db527 authored by Julian Wiedmann's avatar Julian Wiedmann Committed by Jakub Kicinski
Browse files

s390/qeth: improve selection of ethtool link modes 



The link mode is a combination of port speed and port mode. But we
currently only consider the speed, and then typically select the
corresponding TP-based link mode. For 1G and 10G Fibre links this means
we display the wrong link modes.

Move the SPEED_* switch statements inside the PORT_* cases, and only
consider valid combinations where we can select the corresponding
link mode. Add the relevant link modes (1000baseX, 10000baseSR and
1000baseLR) that were introduced back with
commit 5711a982 ("net: ethtool: add support for 1000BaseX and missing 10G link modes").

To differentiate between 10000baseSR and 10000baseLR, use the detailed
media_type information that QUERY OAT provides.

Signed-off-by: default avatarJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent e92d42e7

drivers/s390/net/qeth_core.h

+7 −0
Original line number Diff line number Diff line
@@ -701,10 +701,17 @@ enum qeth_pnso_mode { 
	QETH_PNSO_ADDR_INFO,

};



enum qeth_link_mode {

	QETH_LINK_MODE_UNKNOWN,

	QETH_LINK_MODE_FIBRE_SHORT,

	QETH_LINK_MODE_FIBRE_LONG,

};



struct qeth_link_info {

	u32 speed;

	u8 duplex;

	u8 port;

	enum qeth_link_mode link_mode;

};



#define QETH_BROADCAST_WITH_ECHO    0x01

drivers/s390/net/qeth_core_main.c

+11 −0
Original line number Diff line number Diff line
@@ -5018,13 +5018,19 @@ static int qeth_init_link_info_oat_cb(struct qeth_card *card, 
	switch (phys_if->media_type) {

	case QETH_QOAT_PHYS_MEDIA_COPPER:

		link_info->port = PORT_TP;

		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;

		break;

	case QETH_QOAT_PHYS_MEDIA_FIBRE_SHORT:

		link_info->port = PORT_FIBRE;

		link_info->link_mode = QETH_LINK_MODE_FIBRE_SHORT;

		break;

	case QETH_QOAT_PHYS_MEDIA_FIBRE_LONG:

		link_info->port = PORT_FIBRE;

		link_info->link_mode = QETH_LINK_MODE_FIBRE_LONG;

		break;

	default:

		link_info->port = PORT_OTHER;

		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;

		break;

	}
@@ -5038,6 +5044,7 @@ static void qeth_init_link_info(struct qeth_card *card) 
	if (IS_IQD(card) || IS_VM_NIC(card)) {

		card->info.link_info.speed = SPEED_10000;

		card->info.link_info.port = PORT_FIBRE;

		card->info.link_info.link_mode = QETH_LINK_MODE_FIBRE_SHORT;

	} else {

		switch (card->info.link_type) {

		case QETH_LINK_TYPE_FAST_ETH:
@@ -5064,6 +5071,8 @@ static void qeth_init_link_info(struct qeth_card *card) 
			card->info.link_info.speed = SPEED_UNKNOWN;

			card->info.link_info.port = PORT_OTHER;

		}



		card->info.link_info.link_mode = QETH_LINK_MODE_UNKNOWN;

	}



	/* Get more accurate data via QUERY OAT: */
@@ -5089,6 +5098,8 @@ static void qeth_init_link_info(struct qeth_card *card) 
					card->info.link_info.duplex = link_info.duplex;

				if (link_info.port != PORT_OTHER)

					card->info.link_info.port = link_info.port;

				if (link_info.link_mode != QETH_LINK_MODE_UNKNOWN)

					card->info.link_info.link_mode = link_info.link_mode;

			}

		}

	}

drivers/s390/net/qeth_ethtool.c

+75 −49
Original line number Diff line number Diff line
@@ -324,7 +324,8 @@ static int qeth_set_per_queue_coalesce(struct net_device *dev, u32 queue, 
/* Autoneg and full-duplex are supported and advertised unconditionally.     */

/* Always advertise and support all speeds up to specified, and only one     */

/* specified port type.							     */

static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd)

static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd,

					enum qeth_link_mode link_mode)

{

	ethtool_link_ksettings_zero_link_mode(cmd, supported);

	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
@@ -337,23 +338,8 @@ static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd) 
	case PORT_TP:

		ethtool_link_ksettings_add_link_mode(cmd, supported, TP);

		ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);

		break;

	case PORT_FIBRE:

		ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);

		ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);

		break;

	default:

		break;

	}



	/* partially does fall through, to also select lower speeds */

		switch (cmd->base.speed) {

	case SPEED_25000:

		ethtool_link_ksettings_add_link_mode(cmd, supported,

						     25000baseSR_Full);

		ethtool_link_ksettings_add_link_mode(cmd, advertising,

						     25000baseSR_Full);

		break;

		case SPEED_10000:

			ethtool_link_ksettings_add_link_mode(cmd, supported,

							     10000baseT_Full);
@@ -393,6 +379,46 @@ static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd) 
		default:

			break;

		}



		break;

	case PORT_FIBRE:

		ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);

		ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);



		switch (cmd->base.speed) {

		case SPEED_25000:

			ethtool_link_ksettings_add_link_mode(cmd, supported,

							     25000baseSR_Full);

			ethtool_link_ksettings_add_link_mode(cmd, advertising,

							     25000baseSR_Full);

			break;

		case SPEED_10000:

			if (link_mode == QETH_LINK_MODE_FIBRE_LONG) {

				ethtool_link_ksettings_add_link_mode(cmd, supported,

								     10000baseLR_Full);

				ethtool_link_ksettings_add_link_mode(cmd, advertising,

								     10000baseLR_Full);

			} else if (link_mode == QETH_LINK_MODE_FIBRE_SHORT) {

				ethtool_link_ksettings_add_link_mode(cmd, supported,

								     10000baseSR_Full);

				ethtool_link_ksettings_add_link_mode(cmd, advertising,

								     10000baseSR_Full);

			}

			break;

		case SPEED_1000:

			ethtool_link_ksettings_add_link_mode(cmd, supported,

							     1000baseX_Full);

			ethtool_link_ksettings_add_link_mode(cmd, advertising,

							     1000baseX_Full);

			break;

		default:

			break;

		}



		break;

	default:

		break;

	}

}



static int qeth_get_link_ksettings(struct net_device *netdev,
@@ -420,7 +446,7 @@ static int qeth_get_link_ksettings(struct net_device *netdev, 
			cmd->base.port = link_info.port;

	}



	qeth_set_ethtool_link_modes(cmd);

	qeth_set_ethtool_link_modes(cmd, card->info.link_info.link_mode);



	return 0;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE