+161
−49
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
The TLV320AIC32x4 has a very flexible mixer on the inputs to the ADCs. Each mixer has an available set of available pins that can be connected to the ADC positive and negative pins via three different resistor values. This allows for configuration of differential inputs as well as doing level manipulation between sources going into the mixers. The current code only provides positive pins and I implemented the resistors in an earlier patch. It turns out that it appears to more accurately model what's happening to implement each of the pins as a MUX rather than on/off switches and a mixer. This way each pin can be set to its desired resistor value. Since there are no switches, the mixer is no longer necessary in the DAPM path. I set the DAPM paths such that the "off" position of any of the MUXes turns the path off. This should allow for any input confiuration available on the codec. Signed-off-by:Jeremy McDermond <nh6z@nh6z.net> Signed-off-by:
Mark Brown <broonie@kernel.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE