hwmon: (f71882fg) Fix multi-line comments

	u16	fan_full_speed[4];

	u8	fan_status;

	u8	fan_beep;

	/* Note: all models have max 3 temperature channels, but on some

	   they are addressed as 0-2 and on others as 1-3, so for coding

	   convenience we reserve space for 4 channels */

	/*

	 * Note: all models have max 3 temperature channels, but on some

	 * they are addressed as 0-2 and on others as 1-3, so for coding

	 * convenience we reserve space for 4 channels

	 */

	u16	temp[4];

	u8	temp_ovt[4];

	u8	temp_high[4];

static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);

/* Temp attr for the f71858fg, the f71858fg is special as it has its

   temperature indexes start at 0 (the others start at 1) */

/*

 * Temp attr for the f71858fg, the f71858fg is special as it has its

 * temperature indexes start at 0 (the others start at 1)

 */

static struct sensor_device_attribute_2 f71858fg_temp_attr[] = {

	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),

	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,

		store_temp_max, 0, 1),

	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,

		store_temp_max_hyst, 0, 1),

	/* Should really be temp1_max_alarm, but older versions did not handle

	   the max and crit alarms separately and lm_sensors v2 depends on the

	   presence of temp#_alarm files. The same goes for temp2/3 _alarm. */

	/*

	 * Should really be temp1_max_alarm, but older versions did not handle

	 * the max and crit alarms separately and lm_sensors v2 depends on the

	 * presence of temp#_alarm files. The same goes for temp2/3 _alarm.

	 */

	SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),

	SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,

		store_temp_crit, 0, 1),

		store_temp_beep, 0, 7),

} };

/* Temp attr for the f8000

   Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)

   is used as hysteresis value to clear alarms

   Also like the f71858fg its temperature indexes start at 0

/*

 * Temp attr for the f8000

 * Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)

 * is used as hysteresis value to clear alarms

 * Also like the f71858fg its temperature indexes start at 0

 */

static struct sensor_device_attribute_2 f8000_temp_attr[] = {

	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),

		store_fan_beep, 0, 3),

};

/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the

   standard models */

/*

 * PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the

 * standard models

 */

static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[3][7] = { {

	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,

		      show_pwm_auto_point_channel,

		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),

} };

/* PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the

   pwm setting when the temperature is above the pwmX_auto_point1_temp can be

   programmed instead of being hardcoded to 0xff */

/*

 * PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the

 * pwm setting when the temperature is above the pwmX_auto_point1_temp can be

 * programmed instead of being hardcoded to 0xff

 */

static struct sensor_device_attribute_2 f71869_auto_pwm_attr[3][8] = { {

	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,

		      show_pwm_auto_point_channel,

	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),

};

/* PWM attr for the f8000, zones mapped to temp instead of to pwm!

   Also the register block at offset A0 maps to TEMP1 (so our temp2, as the

   F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */

/*

 * PWM attr for the f8000, zones mapped to temp instead of to pwm!

 * Also the register block at offset A0 maps to TEMP1 (so our temp2, as the

 * F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0

 */

static struct sensor_device_attribute_2 f8000_auto_pwm_attr[3][14] = { {

	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,

		      show_pwm_auto_point_channel,

			data->temp_config =

				f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);

			if (data->temp_config & 0x10)

				/* The f71858fg temperature alarms behave as

				   the f8000 alarms in this mode */

				/*

				 * The f71858fg temperature alarms behave as

				 * the f8000 alarms in this mode

				 */

				err = f71882fg_create_sysfs_files(pdev,

					f8000_temp_attr,

					ARRAY_SIZE(f8000_temp_attr));