Commit 2061d74d authored by Lokesh Vutla's avatar Lokesh Vutla Committed by Tony Lindgren
Browse files

ARM: dts: am335x: Add initial support for ICEv2 board 

TI's Industrial Communication Engine EVM is a low cost hardware mainly
developed for industrial communication type applications using serial
or Ethernet based interfaces. This platform features TI's AM3359 with
800MHz single core Cortex-A8 processor, 256MB DDR3, 64MB SPI flash,
8MB NOR Flash, mmc, usb, can, dual Ethernet ports.

For more information, look at HW user guide[1], Data manual[2].

Just add basic support for the moment.

[1] http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide
[2] http://www.ti.com/lit/ds/symlink/am3359.pdf



Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent dce2a652

Documentation/devicetree/bindings/arm/omap/omap.txt

+3 −0
Original line number Diff line number Diff line
@@ -133,6 +133,9 @@ Boards: 
- AM335X Bone : Low cost community board

  compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"



- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM.

  compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3"



- AM335X OrionLXm : Substation Automation Platform

  compatible = "novatech,am335x-lxm", "ti,am33xx"

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -494,6 +494,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ 
	am335x-cm-t335.dtb \

	am335x-evm.dtb \

	am335x-evmsk.dtb \

	am335x-icev2.dtb \

	am335x-lxm.dtb \

	am335x-nano.dtb \

	am335x-pepper.dtb \

arch/arm/boot/dts/am335x-icev2.dts

0 → 100644
+306 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/*

 * AM335x ICE V2 board

 * http://www.ti.com/tool/tmdsice3359

 */



/dts-v1/;



#include "am33xx.dtsi"



/ {

	model = "TI AM3359 ICE-V2";

	compatible = "ti,am3359-icev2", "ti,am33xx";



	memory {

		device_type = "memory";

		reg = <0x80000000 0x10000000>; /* 256 MB */

	};



	vbat: fixedregulator@0 {

		compatible = "regulator-fixed";

		regulator-name = "vbat";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-boot-on;

	};



	vtt_fixed: fixedregulator@1 {

		compatible = "regulator-fixed";

		regulator-name = "vtt";

		regulator-min-microvolt = <1500000>;

		regulator-max-microvolt = <1500000>;

		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;

		regulator-always-on;

		regulator-boot-on;

		enable-active-high;

	};



	leds@0 {

		compatible = "gpio-leds";



		led@0 {

			label = "out0";

			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@1 {

			label = "out1";

			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@2 {

			label = "out2";

			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@3 {

			label = "out3";

			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@4 {

			label = "out4";

			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@5 {

			label = "out5";

			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@6 {

			label = "out6";

			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@7 {

			label = "out7";

			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};

	};



	/* Tricolor status LEDs */

	leds@1 {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&user_leds>;



		led@0 {

			label = "status0:red:cpu0";

			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;

			default-state = "off";

			linux,default-trigger = "cpu0";

		};



		led@1 {

			label = "status0:green:usr";

			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@2 {

			label = "status0:yellow:usr";

			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@3 {

			label = "status1:red:mmc0";

			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;

			default-state = "off";

			linux,default-trigger = "mmc0";

		};



		led@4 {

			label = "status1:green:usr";

			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		led@5 {

			label = "status1:yellow:usr";

			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};

	};

};



&am33xx_pinmux {

	user_leds: user_leds {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */

			AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */

			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */

			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */

			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */

			AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */

		>;

	};



	mmc0_pins_default: mmc0_pins_default {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */

			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */

			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */

			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */

			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */

			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */

			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */

		>;

	};



	i2c0_pins_default: i2c0_pins_default {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */

			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */

		>;

	};



	spi0_pins_default: spi0_pins_default {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */

			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */

			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */

			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */

		>;

	};



	uart3_pins_default: uart3_pins_default {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */

			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */

		>;

	};

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_default>;



	status = "okay";

	clock-frequency = <400000>;



	tps: power-controller@2d {

		reg = <0x2d>;

	};



	tpic2810: gpio@60 {

		compatible = "ti,tpic2810";

		reg = <0x60>;

		gpio-controller;

		#gpio-cells = <2>;

	};

};



#include "tps65910.dtsi"



&tps {

	vcc1-supply = <&vbat>;

	vcc2-supply = <&vbat>;

	vcc3-supply = <&vbat>;

	vcc4-supply = <&vbat>;

	vcc5-supply = <&vbat>;

	vcc6-supply = <&vbat>;

	vcc7-supply = <&vbat>;

	vccio-supply = <&vbat>;



	regulators {

		vrtc_reg: regulator@0 {

			regulator-always-on;

		};



		vio_reg: regulator@1 {

			regulator-always-on;

		};



		vdd1_reg: regulator@2 {

			regulator-name = "vdd_mpu";

			regulator-min-microvolt = <912500>;

			regulator-max-microvolt = <1326000>;

			regulator-boot-on;

			regulator-always-on;

		};



		vdd2_reg: regulator@3 {

			regulator-name = "vdd_core";

			regulator-min-microvolt = <912500>;

			regulator-max-microvolt = <1144000>;

			regulator-boot-on;

			regulator-always-on;

		};



		vdd3_reg: regulator@4 {

			regulator-always-on;

		};



		vdig1_reg: regulator@5 {

			regulator-always-on;

		};



		vdig2_reg: regulator@6 {

			regulator-always-on;

		};



		vpll_reg: regulator@7 {

			regulator-always-on;

		};



		vdac_reg: regulator@8 {

			regulator-always-on;

		};



		vaux1_reg: regulator@9 {

			regulator-always-on;

		};



		vaux2_reg: regulator@10 {

			regulator-always-on;

		};



		vaux33_reg: regulator@11 {

			regulator-always-on;

		};



		vmmc_reg: regulator@12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <3300000>;

			regulator-always-on;

		};

	};

};



&mmc1 {

	status = "okay";

	vmmc-supply = <&vmmc_reg>;

	bus-width = <4>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_default>;

};



&gpio0 {

	/* Do not idle the GPIO used for holding the VTT regulator */

	ti,no-reset-on-init;

	ti,no-idle-on-init;

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins_default>;

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE