Commit 205704c6 authored by Stephen Suryaputra's avatar Stephen Suryaputra Committed by Jakub Kicinski
Browse files

vrf: packets with lladdr src needs dst at input with orig_iif when needs strict 



Depending on the order of the routes to fe80::/64 are installed on the
VRF table, the NS for the source link-local address of the originator
might be sent to the wrong interface.

This patch ensures that packets with link-local addr source is doing a
lookup with the orig_iif when the destination addr indicates that it
is strict.

Add the reproducer as a use case in self test script fcnal-test.sh.

Fixes: b4869aa2 ("net: vrf: ipv6 support for local traffic to local addresses")
Signed-off-by: default avatarStephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 4d1be581

drivers/net/vrf.c

+8 −2
Original line number Diff line number Diff line
@@ -1315,11 +1315,17 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev, 
	int orig_iif = skb->skb_iif;

	bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);

	bool is_ndisc = ipv6_ndisc_frame(skb);

	bool is_ll_src;



	/* loopback, multicast & non-ND link-local traffic; do not push through

	 * packet taps again. Reset pkt_type for upper layers to process skb

	 * packet taps again. Reset pkt_type for upper layers to process skb.

	 * for packets with lladdr src, however, skip so that the dst can be

	 * determine at input using original ifindex in the case that daddr

	 * needs strict

	 */

	if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {

	is_ll_src = ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL;

	if (skb->pkt_type == PACKET_LOOPBACK ||

	    (need_strict && !is_ndisc && !is_ll_src)) {

		skb->dev = vrf_dev;

		skb->skb_iif = vrf_dev->ifindex;

		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;

tools/testing/selftests/net/fcnal-test.sh

+95 −0
Original line number Diff line number Diff line
@@ -256,6 +256,28 @@ setup_cmd_nsb() 
	fi

}



setup_cmd_nsc()

{

	local cmd="$*"

	local rc



	run_cmd_nsc ${cmd}

	rc=$?

	if [ $rc -ne 0 ]; then

		# show user the command if not done so already

		if [ "$VERBOSE" = "0" ]; then

			echo "setup command: $cmd"

		fi

		echo "failed. stopping tests"

		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then

			echo

			echo "hit enter to continue"

			read a

		fi

		exit $rc

	fi

}



# set sysctl values in NS-A

set_sysctl()

{
@@ -471,6 +493,36 @@ setup() 
	sleep 1

}



setup_lla_only()

{

	# make sure we are starting with a clean slate

	kill_procs

	cleanup 2>/dev/null



	log_debug "Configuring network namespaces"

	set -e



	create_ns ${NSA} "-" "-"

	create_ns ${NSB} "-" "-"

	create_ns ${NSC} "-" "-"

	connect_ns ${NSA} ${NSA_DEV} "-" "-" \

		   ${NSB} ${NSB_DEV} "-" "-"

	connect_ns ${NSA} ${NSA_DEV2} "-" "-" \

		   ${NSC} ${NSC_DEV}  "-" "-"



	NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV})

	NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV})

	NSC_LINKIP6=$(get_linklocal ${NSC} ${NSC_DEV})



	create_vrf ${NSA} ${VRF} ${VRF_TABLE} "-" "-"

	ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF}

	ip -netns ${NSA} link set dev ${NSA_DEV2} vrf ${VRF}



	set +e



	sleep 1

}



################################################################################

# IPv4
@@ -3787,10 +3839,53 @@ use_case_br() 
	setup_cmd_nsb ip li del vlan100 2>/dev/null

}



# VRF only.

# ns-A device is connected to both ns-B and ns-C on a single VRF but only has

# LLA on the interfaces

use_case_ping_lla_multi()

{

	setup_lla_only

	# only want reply from ns-A

	setup_cmd_nsb sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1

	setup_cmd_nsc sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1



	log_start

	run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}

	log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Pre cycle, ping out ns-B"



	run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}

	log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Pre cycle, ping out ns-C"



	# cycle/flap the first ns-A interface

	setup_cmd ip link set ${NSA_DEV} down

	setup_cmd ip link set ${NSA_DEV} up

	sleep 1



	log_start

	run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}

	log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-B"

	run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}

	log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-C"



	# cycle/flap the second ns-A interface

	setup_cmd ip link set ${NSA_DEV2} down

	setup_cmd ip link set ${NSA_DEV2} up

	sleep 1



	log_start

	run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}

	log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-B"

	run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}

	log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-C"

}



use_cases()

{

	log_section "Use cases"

	log_subsection "Device enslaved to bridge"

	use_case_br

	log_subsection "Ping LLA with multiple interfaces"

	use_case_ping_lla_multi

}



################################################################################

CRA Git | Maintained and supported by SUSTech CRA and CCSE