[ARM] 3242/2: AT91RM9200 support for 2.6 (Serial)

	  your boot loader (lilo or loadlin) about how to pass options to the

	  kernel at boot time.)

config SERIAL_AT91

	bool "AT91RM9200 serial port support"

	depends on ARM && ARCH_AT91RM9200

	select SERIAL_CORE

	help

	  This enables the driver for the on-chip UARTs of the AT91RM9200

	  processor.

config SERIAL_AT91_CONSOLE

	bool "Support for console on AT91RM9200 serial port"

	depends on SERIAL_AT91=y

	select SERIAL_CORE_CONSOLE

	help

	  Say Y here if you wish to use a UART on the AT91RM9200 as the system

	  console (the system console is the device which receives all kernel

	  messages and warnings and which allows logins in single user mode).

config SERIAL_AT91_TTYAT

	bool "Install as device ttyAT0-4 instead of ttyS0-4"

	depends on SERIAL_AT91=y

	help

	  Say Y here if you wish to have the five internal AT91RM9200 UARTs

	  appear as /dev/ttyAT0-4 (major 240, minor 0-4) instead of the

	  normal /dev/ttyS0-4 (major 4, minor 64-68). This is necessary if

	  you also want other UARTs, such as external 8250/16C550 compatible

	  UARTs.

	  The ttySn nodes are legally reserved for the 8250 serial driver

	  but are often misused by other serial drivers.

	  To use this, you should create suitable ttyATn device nodes in

	  /dev/, and pass "console=ttyATn" to the kernel.

	  Say Y if you have an external 8250/16C550 UART.  If unsure, say N.

config SERIAL_CLPS711X

	tristate "CLPS711X serial port support"

	depends on ARM && ARCH_CLPS711X

obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o

obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o

obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o

obj-$(CONFIG_SERIAL_AT91) += at91_serial.o