Commit 1de392f5 authored by Joe Perches's avatar Joe Perches Committed by Thomas Gleixner
Browse files

x86: Remove pr_fmt duplicate logging prefixes 



Converting pr_fmt from a default simple #define to use KBUILD_MODNAME
added some duplicate prefixes.

Remove the duplicate prefixes.

Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/e7b709a2b040af7faa81b0aa2c3a125aed628a82.1525964383.git.joe@perches.com
parent a7a3153a

arch/x86/events/amd/ibs.c

+1 −1
Original line number Diff line number Diff line
@@ -889,7 +889,7 @@ static void force_ibs_eilvt_setup(void) 
	if (!ibs_eilvt_valid())

		goto out;



	pr_info("IBS: LVT offset %d assigned\n", offset);

	pr_info("LVT offset %d assigned\n", offset);



	return;

out:

arch/x86/kernel/e820.c

+17 −15
Original line number Diff line number Diff line
@@ -155,7 +155,8 @@ static void __init __e820__range_add(struct e820_table *table, u64 start, u64 si 
	int x = table->nr_entries;



	if (x >= ARRAY_SIZE(table->entries)) {

		pr_err("e820: too many entries; ignoring [mem %#010llx-%#010llx]\n", start, start + size - 1);

		pr_err("too many entries; ignoring [mem %#010llx-%#010llx]\n",

		       start, start + size - 1);

		return;

	}
@@ -190,7 +191,8 @@ void __init e820__print_table(char *who) 
	int i;



	for (i = 0; i < e820_table->nr_entries; i++) {

		pr_info("%s: [mem %#018Lx-%#018Lx] ", who,

		pr_info("%s: [mem %#018Lx-%#018Lx] ",

			who,

			e820_table->entries[i].addr,

			e820_table->entries[i].addr + e820_table->entries[i].size - 1);
@@ -574,7 +576,7 @@ void __init e820__update_table_print(void) 
	if (e820__update_table(e820_table))

		return;



	pr_info("e820: modified physical RAM map:\n");

	pr_info("modified physical RAM map:\n");

	e820__print_table("modified");

}
@@ -636,9 +638,8 @@ __init void e820__setup_pci_gap(void) 
	if (!found) {

#ifdef CONFIG_X86_64

		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;

		pr_err(

			"e820: Cannot find an available gap in the 32-bit address range\n"

			"e820: PCI devices with unassigned 32-bit BARs may not work!\n");

		pr_err("Cannot find an available gap in the 32-bit address range\n");

		pr_err("PCI devices with unassigned 32-bit BARs may not work!\n");

#else

		gapstart = 0x10000000;

#endif
@@ -649,7 +650,8 @@ __init void e820__setup_pci_gap(void) 
	 */

	pci_mem_start = gapstart;



	pr_info("e820: [mem %#010lx-%#010lx] available for PCI devices\n", gapstart, gapstart + gapsize - 1);

	pr_info("[mem %#010lx-%#010lx] available for PCI devices\n",

		gapstart, gapstart + gapsize - 1);

}



/*
@@ -711,7 +713,7 @@ void __init e820__memory_setup_extended(u64 phys_addr, u32 data_len) 
	memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));



	early_memunmap(sdata, data_len);

	pr_info("e820: extended physical RAM map:\n");

	pr_info("extended physical RAM map:\n");

	e820__print_table("extended");

}
@@ -780,7 +782,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align) 
	addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);

	if (addr) {

		e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);

		pr_info("e820: update e820_table_kexec for e820__memblock_alloc_reserved()\n");

		pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n");

		e820__update_table_kexec();

	}
@@ -830,7 +832,7 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, enum e820_type 
	if (last_pfn > max_arch_pfn)

		last_pfn = max_arch_pfn;



	pr_info("e820: last_pfn = %#lx max_arch_pfn = %#lx\n",

	pr_info("last_pfn = %#lx max_arch_pfn = %#lx\n",

		last_pfn, max_arch_pfn);

	return last_pfn;

}
@@ -1005,7 +1007,7 @@ void __init e820__finish_early_params(void) 
		if (e820__update_table(e820_table) < 0)

			early_panic("Invalid user supplied memory map");



		pr_info("e820: user-defined physical RAM map:\n");

		pr_info("user-defined physical RAM map:\n");

		e820__print_table("user");

	}

}
@@ -1238,7 +1240,7 @@ void __init e820__memory_setup(void) 
	memcpy(e820_table_kexec, e820_table, sizeof(*e820_table_kexec));

	memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));



	pr_info("e820: BIOS-provided physical RAM map:\n");

	pr_info("BIOS-provided physical RAM map:\n");

	e820__print_table(who);

}

arch/x86/kernel/hpet.c

+2 −3
Original line number Diff line number Diff line
@@ -975,8 +975,7 @@ int __init hpet_enable(void) 
	cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);

	hpet_writel(cfg, HPET_CFG);

	if (cfg)

		pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",

			cfg);

		pr_warn("Unrecognized bits %#x set in global cfg\n", cfg);



	for (i = 0; i <= last; ++i) {

		cfg = hpet_readl(HPET_Tn_CFG(i));
@@ -988,7 +987,7 @@ int __init hpet_enable(void) 
			 | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE

			 | HPET_TN_FSB | HPET_TN_FSB_CAP);

		if (cfg)

			pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",

			pr_warn("Unrecognized bits %#x set in cfg#%u\n",

				cfg, i);

	}

	hpet_print_config();

arch/x86/kernel/uprobes.c

+2 −2
Original line number Diff line number Diff line
@@ -1079,8 +1079,8 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs 
		return orig_ret_vaddr;



	if (nleft != rasize) {

		pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "

			"%%ip=%#lx\n", current->pid, regs->sp, regs->ip);

		pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",

		       current->pid, regs->sp, regs->ip);



		force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);

	}

arch/x86/mm/numa.c

+11 −11
Original line number Diff line number Diff line
@@ -136,13 +136,13 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end, 


	/* whine about and ignore invalid blks */

	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {

		pr_warning("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",

		pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",

			nid, start, end - 1);

		return 0;

	}



	if (mi->nr_blks >= NR_NODE_MEMBLKS) {

		pr_err("NUMA: too many memblk ranges\n");

		pr_err("too many memblk ranges\n");

		return -EINVAL;

	}
@@ -267,12 +267,12 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi) 
			 */

			if (bi->end > bj->start && bi->start < bj->end) {

				if (bi->nid != bj->nid) {

					pr_err("NUMA: node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",

					pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",

					       bi->nid, bi->start, bi->end - 1,

					       bj->nid, bj->start, bj->end - 1);

					return -EINVAL;

				}

				pr_warning("NUMA: Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",

				pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",

					bi->nid, bi->start, bi->end - 1,

					bj->start, bj->end - 1);

			}
@@ -364,7 +364,7 @@ static int __init numa_alloc_distance(void) 
	phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),

				      size, PAGE_SIZE);

	if (!phys) {

		pr_warning("NUMA: Warning: can't allocate distance table!\n");

		pr_warn("Warning: can't allocate distance table!\n");

		/* don't retry until explicitly reset */

		numa_distance = (void *)1LU;

		return -ENOMEM;
@@ -410,14 +410,14 @@ void __init numa_set_distance(int from, int to, int distance) 


	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||

			from < 0 || to < 0) {

		pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",

		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",

			     from, to, distance);

		return;

	}



	if ((u8)distance != distance ||

	    (from == to && distance != LOCAL_DISTANCE)) {

		pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",

		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",

			     from, to, distance);

		return;

	}

CRA Git | Maintained and supported by SUSTech CRA and CCSE