+1
−0
+30
−45
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Instead of requesting the "ext" clock and handling the watchdog clock divider and gating in the watchdog driver, we now request and use the "wdt" clock that is supplied by the ingenic-timer "TCU" driver. The major benefit is that the watchdog's clock rate and parent can now be specified from within devicetree, instead of hardcoded in the driver. Also, this driver won't poke anymore into the TCU registers to enable/disable the clock, as this is now handled by the TCU driver. On the bad side, we break the ABI with devicetree - as we now request a different clock. In this very specific case it is still okay, as every Ingenic JZ47xx-based board out there compile the devicetree within the kernel; so it's still time to push breaking changes, in order to get a clean devicetree that won't break once it musn't. Signed-off-by:Paul Cercueil <paul@crapouillou.net> Tested-by:
Mathieu Malaterre <malat@debian.org> Tested-by:
Artur Rojek <contact@artur-rojek.eu> Acked-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-1-paul@crapouillou.net Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE