Merge branch 'net-aquantia-implement-vlan-offloads'

aQuantia AQtion Driver for the aQuantia Multi-Gigabit PCI Express Family of

Ethernet Adapters

=============================================================================

Contents

========

- Identifying Your Adapter

- Configuration

- Supported ethtool options

- Command Line Parameters

- Config file parameters

- Support

- License

Identifying Your Adapter

========================

The driver in this release is compatible with AQC-100, AQC-107, AQC-108 based ethernet adapters.

SFP+ Devices (for AQC-100 based adapters)

----------------------------------

This release tested with passive Direct Attach Cables (DAC) and SFP+/LC Optical Transceiver.

Configuration

=========================

  Viewing Link Messages

  ---------------------

  Link messages will not be displayed to the console if the distribution is

  restricting system messages. In order to see network driver link messages on

  your console, set dmesg to eight by entering the following:

       dmesg -n 8

  NOTE: This setting is not saved across reboots.

  Jumbo Frames

  ------------

  The driver supports Jumbo Frames for all adapters. Jumbo Frames support is

  enabled by changing the MTU to a value larger than the default of 1500.

  The maximum value for the MTU is 16000.  Use the `ip` command to

  increase the MTU size.  For example:

        ip link set mtu 16000 dev enp1s0

  ethtool

  -------

  The driver utilizes the ethtool interface for driver configuration and

  diagnostics, as well as displaying statistical information. The latest

  ethtool version is required for this functionality.

  NAPI

  ----

  NAPI (Rx polling mode) is supported in the atlantic driver.

Supported ethtool options

============================

 Viewing adapter settings

 ---------------------

 ethtool <ethX>

 Output example:

  Settings for enp1s0:

    Supported ports: [ TP ]

    Supported link modes:   100baseT/Full

                            1000baseT/Full

                            10000baseT/Full

                            2500baseT/Full

                            5000baseT/Full

    Supported pause frame use: Symmetric

    Supports auto-negotiation: Yes

    Supported FEC modes: Not reported

    Advertised link modes:  100baseT/Full

                            1000baseT/Full

                            10000baseT/Full

                            2500baseT/Full

                            5000baseT/Full

    Advertised pause frame use: Symmetric

    Advertised auto-negotiation: Yes

    Advertised FEC modes: Not reported

    Speed: 10000Mb/s

    Duplex: Full

    Port: Twisted Pair

    PHYAD: 0

    Transceiver: internal

    Auto-negotiation: on

    MDI-X: Unknown

    Supports Wake-on: g

    Wake-on: d

    Link detected: yes

 ---

 Note: AQrate speeds (2.5/5 Gb/s) will be displayed only with linux kernels > 4.10.

    But you can still use these speeds:

	ethtool -s eth0 autoneg off speed 2500

 Viewing adapter information

 ---------------------

 ethtool -i <ethX>

 Output example:

  driver: atlantic

  version: 5.2.0-050200rc5-generic-kern

  firmware-version: 3.1.78

  expansion-rom-version:

  bus-info: 0000:01:00.0

  supports-statistics: yes

  supports-test: no

  supports-eeprom-access: no

  supports-register-dump: yes

  supports-priv-flags: no

 Viewing Ethernet adapter statistics:

 ---------------------

 ethtool -S <ethX>

 Output example:

 NIC statistics:

     InPackets: 13238607

     InUCast: 13293852

     InMCast: 52

     InBCast: 3

     InErrors: 0

     OutPackets: 23703019

     OutUCast: 23704941

     OutMCast: 67

     OutBCast: 11

     InUCastOctects: 213182760

     OutUCastOctects: 22698443

     InMCastOctects: 6600

     OutMCastOctects: 8776

     InBCastOctects: 192

     OutBCastOctects: 704

     InOctects: 2131839552

     OutOctects: 226938073

     InPacketsDma: 95532300

     OutPacketsDma: 59503397

     InOctetsDma: 1137102462

     OutOctetsDma: 2394339518

     InDroppedDma: 0

     Queue[0] InPackets: 23567131

     Queue[0] OutPackets: 20070028

     Queue[0] InJumboPackets: 0

     Queue[0] InLroPackets: 0

     Queue[0] InErrors: 0

     Queue[1] InPackets: 45428967

     Queue[1] OutPackets: 11306178

     Queue[1] InJumboPackets: 0

     Queue[1] InLroPackets: 0

     Queue[1] InErrors: 0

     Queue[2] InPackets: 3187011

     Queue[2] OutPackets: 13080381

     Queue[2] InJumboPackets: 0

     Queue[2] InLroPackets: 0

     Queue[2] InErrors: 0

     Queue[3] InPackets: 23349136

     Queue[3] OutPackets: 15046810

     Queue[3] InJumboPackets: 0

     Queue[3] InLroPackets: 0

     Queue[3] InErrors: 0

 Interrupt coalescing support

 ---------------------------------

 ITR mode, TX/RX coalescing timings could be viewed with:

 ethtool -c <ethX>

 and changed with:

 ethtool -C <ethX> tx-usecs <usecs> rx-usecs <usecs>

 To disable coalescing:

 ethtool -C <ethX> tx-usecs 0 rx-usecs 0 tx-max-frames 1 tx-max-frames 1

 Wake on LAN support

 ---------------------------------

 WOL support by magic packet:

 ethtool -s <ethX> wol g

 To disable WOL:

 ethtool -s <ethX> wol d

 Set and check the driver message level

 ---------------------------------

 Set message level

 ethtool -s <ethX> msglvl <level>

 Level values:

 0x0001 - general driver status.

 0x0002 - hardware probing.

 0x0004 - link state.

 0x0008 - periodic status check.

 0x0010 - interface being brought down.

 0x0020 - interface being brought up.

 0x0040 - receive error.

 0x0080 - transmit error.

 0x0200 - interrupt handling.

 0x0400 - transmit completion.

 0x0800 - receive completion.

 0x1000 - packet contents.

 0x2000 - hardware status.

 0x4000 - Wake-on-LAN status.

 By default, the level of debugging messages is set 0x0001(general driver status).

 Check message level

 ethtool <ethX> | grep "Current message level"

 If you want to disable the output of messages

 ethtool -s <ethX> msglvl 0

 RX flow rules (ntuple filters)

 ---------------------------------

 There are separate rules supported, that applies in that order:

 1. 16 VLAN ID rules

 2. 16 L2 EtherType rules

 3. 8 L3/L4 5-Tuple rules

 The driver utilizes the ethtool interface for configuring ntuple filters,

 via "ethtool -N <device> <filter>".

 To enable or disable the RX flow rules:

 ethtool -K ethX ntuple <on|off>

 When disabling ntuple filters, all the user programed filters are

 flushed from the driver cache and hardware. All needed filters must

 be re-added when ntuple is re-enabled.

 Because of the fixed order of the rules, the location of filters is also fixed:

 - Locations 0 - 15 for VLAN ID filters

 - Locations 16 - 31 for L2 EtherType filters

 - Locations 32 - 39 for L3/L4 5-tuple filters (locations 32, 36 for IPv6)

 The L3/L4 5-tuple (protocol, source and destination IP address, source and

 destination TCP/UDP/SCTP port) is compared against 8 filters. For IPv4, up to

 8 source and destination addresses can be matched. For IPv6, up to 2 pairs of

 addresses can be supported. Source and destination ports are only compared for

 TCP/UDP/SCTP packets.

 To add a filter that directs packet to queue 5, use <-N|-U|--config-nfc|--config-ntuple> switch:

 ethtool -N <ethX> flow-type udp4 src-ip 10.0.0.1 dst-ip 10.0.0.2 src-port 2000 dst-port 2001 action 5 <loc 32>

 - action is the queue number.

 - loc is the rule number.

 For "flow-type ip4|udp4|tcp4|sctp4|ip6|udp6|tcp6|sctp6" you must set the loc

 number within 32 - 39.

 For "flow-type ip4|udp4|tcp4|sctp4|ip6|udp6|tcp6|sctp6" you can set 8 rules

 for traffic IPv4 or you can set 2 rules for traffic IPv6. Loc number traffic

 IPv6 is 32 and 36.

 At the moment you can not use IPv4 and IPv6 filters at the same time.

 Example filter for IPv6 filter traffic:

 sudo ethtool -N <ethX> flow-type tcp6 src-ip 2001:db8:0:f101::1 dst-ip 2001:db8:0:f101::2 action 1 loc 32

 sudo ethtool -N <ethX> flow-type ip6 src-ip 2001:db8:0:f101::2 dst-ip 2001:db8:0:f101::5 action -1 loc 36

 Example filter for IPv4 filter traffic:

 sudo ethtool -N <ethX> flow-type udp4 src-ip 10.0.0.4 dst-ip 10.0.0.7 src-port 2000 dst-port 2001 loc 32

 sudo ethtool -N <ethX> flow-type tcp4 src-ip 10.0.0.3 dst-ip 10.0.0.9 src-port 2000 dst-port 2001 loc 33

 sudo ethtool -N <ethX> flow-type ip4 src-ip 10.0.0.6 dst-ip 10.0.0.4 loc 34

 If you set action -1, then all traffic corresponding to the filter will be discarded.

 The maximum value action is 31.

 The VLAN filter (VLAN id) is compared against 16 filters.

 VLAN id must be accompanied by mask 0xF000. That is to distinguish VLAN filter

 from L2 Ethertype filter with UserPriority since both User Priority and VLAN ID

 are passed in the same 'vlan' parameter.

 To add a filter that directs packets from VLAN 2001 to queue 5:

 ethtool -N <ethX> flow-type ip4 vlan 2001 m 0xF000 action 1 loc 0

 L2 EtherType filters allows filter packet by EtherType field or both EtherType

 and User Priority (PCP) field of 802.1Q.

 UserPriority (vlan) parameter must be accompanied by mask 0x1FFF. That is to

 distinguish VLAN filter from L2 Ethertype filter with UserPriority since both

 User Priority and VLAN ID are passed in the same 'vlan' parameter.

 To add a filter that directs IP4 packess of priority 3 to queue 3:

 ethtool -N <ethX> flow-type ether proto 0x800 vlan 0x600 m 0x1FFF action 3 loc 16

 To see the list of filters currently present:

 ethtool <-u|-n|--show-nfc|--show-ntuple> <ethX>

 Rules may be deleted from the table itself. This is done using:

 sudo ethtool <-N|-U|--config-nfc|--config-ntuple> <ethX> delete <loc>

 - loc is the rule number to be deleted.

 Rx filters is an interface to load the filter table that funnels all flow

 into queue 0 unless an alternative queue is specified using "action". In that

 case, any flow that matches the filter criteria will be directed to the

 appropriate queue. RX filters is supported on all kernels 2.6.30 and later.

 RSS for UDP

 ---------------------------------

 Currently, NIC does not support RSS for fragmented IP packets, which leads to

 incorrect working of RSS for fragmented UDP traffic. To disable RSS for UDP the

 RX Flow L3/L4 rule may be used.

 Example:

 ethtool -N eth0 flow-type udp4 action 0 loc 32

Command Line Parameters

=======================

The following command line parameters are available on atlantic driver:

aq_itr -Interrupt throttling mode

----------------------------------------

Accepted values: 0, 1, 0xFFFF

Default value: 0xFFFF

0      - Disable interrupt throttling.

1      - Enable interrupt throttling and use specified tx and rx rates.

0xFFFF - Auto throttling mode. Driver will choose the best RX and TX

         interrupt throtting settings based on link speed.

aq_itr_tx - TX interrupt throttle rate

----------------------------------------

Accepted values: 0 - 0x1FF

Default value: 0

TX side throttling in microseconds. Adapter will setup maximum interrupt delay

to this value. Minimum interrupt delay will be a half of this value

aq_itr_rx - RX interrupt throttle rate

----------------------------------------

Accepted values: 0 - 0x1FF

Default value: 0

RX side throttling in microseconds. Adapter will setup maximum interrupt delay

to this value. Minimum interrupt delay will be a half of this value

Note: ITR settings could be changed in runtime by ethtool -c means (see below)

Config file parameters

=======================

For some fine tuning and performance optimizations,

some parameters can be changed in the {source_dir}/aq_cfg.h file.

AQ_CFG_RX_PAGEORDER

----------------------------------------

Default value: 0

RX page order override. Thats a power of 2 number of RX pages allocated for

each descriptor. Received descriptor size is still limited by AQ_CFG_RX_FRAME_MAX.

Increasing pageorder makes page reuse better (actual on iommu enabled systems).

AQ_CFG_RX_REFILL_THRES

----------------------------------------

Default value: 32

RX refill threshold. RX path will not refill freed descriptors until the

specified number of free descriptors is observed. Larger values may help

better page reuse but may lead to packet drops as well.

AQ_CFG_VECS_DEF

------------------------------------------------------------

Number of queues

Valid Range: 0 - 8 (up to AQ_CFG_VECS_MAX)

Default value: 8

Notice this value will be capped by the number of cores available on the system.

AQ_CFG_IS_RSS_DEF

------------------------------------------------------------

Enable/disable Receive Side Scaling

This feature allows the adapter to distribute receive processing

across multiple CPU-cores and to prevent from overloading a single CPU core.

Valid values

0 - disabled

1 - enabled

Default value: 1

AQ_CFG_NUM_RSS_QUEUES_DEF

------------------------------------------------------------

Number of queues for Receive Side Scaling

Valid Range: 0 - 8 (up to AQ_CFG_VECS_DEF)

Default value: AQ_CFG_VECS_DEF

AQ_CFG_IS_LRO_DEF

------------------------------------------------------------

Enable/disable Large Receive Offload

This offload enables the adapter to coalesce multiple TCP segments and indicate

them as a single coalesced unit to the OS networking subsystem.

The system consumes less energy but it also introduces more latency in packets processing.

Valid values

0 - disabled

1 - enabled

Default value: 1

AQ_CFG_TX_CLEAN_BUDGET

----------------------------------------

Maximum descriptors to cleanup on TX at once.

Default value: 256

After the aq_cfg.h file changed the driver must be rebuilt to take effect.

Support

=======

If an issue is identified with the released source code on the supported

kernel with a supported adapter, email the specific information related

to the issue to support@aquantia.com

License

=======

aQuantia Corporation Network Driver

Copyright(c) 2014 - 2019 aQuantia Corporation.

This program is free software; you can redistribute it and/or modify it

under the terms and conditions of the GNU General Public License,

version 2, as published by the Free Software Foundation.

S:	Maintained

F:	drivers/media/i2c/aptina-pll.*

AQUANTIA ETHERNET DRIVER (atlantic)

M:	Igor Russkikh <igor.russkikh@aquantia.com>

L:	netdev@vger.kernel.org

S:	Supported

W:	http://www.aquantia.com

Q:	http://patchwork.ozlabs.org/project/netdev/list/

F:	drivers/net/ethernet/aquantia/atlantic/

F:	Documentation/networking/device_drivers/aquantia/atlantic.txt

ARC FRAMEBUFFER DRIVER

M:	Jaya Kumar <jayalk@intworks.biz>

S:	Maintained

#ifndef AQ_CFG_H

#define AQ_CFG_H

#include <generated/utsrelease.h>

#define AQ_CFG_VECS_DEF   8U

#define AQ_CFG_TCS_DEF    1U

#define AQ_CFG_DRV_AUTHOR      "aQuantia"

#define AQ_CFG_DRV_DESC        "aQuantia Corporation(R) Network Driver"

#define AQ_CFG_DRV_NAME        "atlantic"

#define AQ_CFG_DRV_VERSION	__stringify(NIC_MAJOR_DRIVER_VERSION)"."\

				__stringify(NIC_MINOR_DRIVER_VERSION)"."\

				__stringify(NIC_BUILD_DRIVER_VERSION)"."\

				__stringify(NIC_REVISION_DRIVER_VERSION) \

#define AQ_CFG_DRV_VERSION	UTS_RELEASE \

				AQ_CFG_DRV_VERSION_SUFFIX

#endif /* AQ_CFG_H */

// SPDX-License-Identifier: GPL-2.0-or-later

// SPDX-License-Identifier: GPL-2.0-only

/* Copyright (C) 2014-2019 aQuantia Corporation. */

/* File aq_drvinfo.c: Definition of common code for firmware info in sys.*/

/* SPDX-License-Identifier: GPL-2.0-or-later */

/* SPDX-License-Identifier: GPL-2.0-only */

/* Copyright (C) 2014-2017 aQuantia Corporation. */

/* File aq_drvinfo.h: Declaration of common code for firmware info in sys.*/