Commit 1c17675d authored by Kamil Debski's avatar Kamil Debski Committed by Greg Kroah-Hartman
Browse files

usb: ehci-exynos: Change to use phy provided by the generic phy framework 



Add the phy provider, supplied by new Exynos-usb2phy using
Generic phy framework.
Keeping the support for older USB phy intact right now, in order
to prevent any functionality break in absence of relevant
device tree side change for ehci-exynos.
Once we move to new phy in the device nodes for ehci, we can
remove the support for older phys.

Signed-off-by: default avatarKamil Debski <k.debski@samsung.com>
[gautam.vivek@samsung.com: Addressed review comments from mailing list]
[gautam.vivek@samsung.com: Kept the code for old usb-phy, and just
added support for new exynos5-usb2phy in generic phy framework]
[gautam.vivek@samsung.com: Edited the commit message]
Signed-off-by: default avatarVivek Gautam <gautam.vivek@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Reviewed-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7d28e54b

Documentation/devicetree/bindings/usb/exynos-usb.txt

+15 −0
Original line number Diff line number Diff line
@@ -12,6 +12,13 @@ Required properties: 
 - interrupts: interrupt number to the cpu.

 - clocks: from common clock binding: handle to usb clock.

 - clock-names: from common clock binding: Shall be "usbhost".

 - port: if in the SoC there are EHCI phys, they should be listed here.

   One phy per port. Each port should have following entries:

	- reg: port number on EHCI controller, e.g

	       On Exynos5250, port 0 is USB2.0 otg phy

			      port 1 is HSIC phy0

			      port 2 is HSIC phy1

	- phys: from the *Generic PHY* bindings; specifying phy used by port.



Optional properties:

 - samsung,vbus-gpio:  if present, specifies the GPIO that
@@ -27,6 +34,14 @@ Example: 


		clocks = <&clock 285>;

		clock-names = "usbhost";



		#address-cells = <1>;

		#size-cells = <0>;

		port@0 {

		    reg = <0>;

		    phys = <&usb2phy 1>;

		    status = "disabled";

		};

	};



OHCI

drivers/usb/host/ehci-exynos.c

+109 −20
Original line number Diff line number Diff line
@@ -19,6 +19,7 @@ 
#include <linux/module.h>

#include <linux/of.h>

#include <linux/of_gpio.h>

#include <linux/phy/phy.h>

#include <linux/platform_device.h>

#include <linux/usb/phy.h>

#include <linux/usb/samsung_usb_phy.h>
@@ -42,14 +43,104 @@ 
static const char hcd_name[] = "ehci-exynos";

static struct hc_driver __read_mostly exynos_ehci_hc_driver;



#define PHY_NUMBER 3



struct exynos_ehci_hcd {

	struct clk *clk;

	struct usb_phy *phy;

	struct usb_otg *otg;

	struct phy *phy_g[PHY_NUMBER];

};



#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)



static int exynos_ehci_get_phy(struct device *dev,

				struct exynos_ehci_hcd *exynos_ehci)

{

	struct device_node *child;

	struct phy *phy;

	int phy_number;

	int ret = 0;



	exynos_ehci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);

	if (IS_ERR(exynos_ehci->phy)) {

		ret = PTR_ERR(exynos_ehci->phy);

		if (ret != -ENXIO && ret != -ENODEV) {

			dev_err(dev, "no usb2 phy configured\n");

			return ret;

		}

		dev_dbg(dev, "Failed to get usb2 phy\n");

	} else {

		exynos_ehci->otg = exynos_ehci->phy->otg;

	}



	for_each_available_child_of_node(dev->of_node, child) {

		ret = of_property_read_u32(child, "reg", &phy_number);

		if (ret) {

			dev_err(dev, "Failed to parse device tree\n");

			of_node_put(child);

			return ret;

		}



		if (phy_number >= PHY_NUMBER) {

			dev_err(dev, "Invalid number of PHYs\n");

			of_node_put(child);

			return -EINVAL;

		}



		phy = devm_of_phy_get(dev, child, 0);

		of_node_put(child);

		if (IS_ERR(phy)) {

			ret = PTR_ERR(phy);

			if (ret != -ENOSYS && ret != -ENODEV) {

				dev_err(dev, "no usb2 phy configured\n");

				return ret;

			}

			dev_dbg(dev, "Failed to get usb2 phy\n");

		}

		exynos_ehci->phy_g[phy_number] = phy;

	}



	return ret;

}



static int exynos_ehci_phy_enable(struct device *dev)

{

	struct usb_hcd *hcd = dev_get_drvdata(dev);

	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);

	int i;

	int ret = 0;



	if (!IS_ERR(exynos_ehci->phy))

		return usb_phy_init(exynos_ehci->phy);



	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)

		if (!IS_ERR(exynos_ehci->phy_g[i]))

			ret = phy_power_on(exynos_ehci->phy_g[i]);

	if (ret)

		for (i--; i >= 0; i--)

			if (!IS_ERR(exynos_ehci->phy_g[i]))

				phy_power_off(exynos_ehci->phy_g[i]);



	return ret;

}



static void exynos_ehci_phy_disable(struct device *dev)

{

	struct usb_hcd *hcd = dev_get_drvdata(dev);

	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);

	int i;



	if (!IS_ERR(exynos_ehci->phy)) {

		usb_phy_shutdown(exynos_ehci->phy);

		return;

	}



	for (i = 0; i < PHY_NUMBER; i++)

		if (!IS_ERR(exynos_ehci->phy_g[i]))

			phy_power_off(exynos_ehci->phy_g[i]);

}



static void exynos_setup_vbus_gpio(struct device *dev)

{

	int err;
@@ -74,7 +165,6 @@ static int exynos_ehci_probe(struct platform_device *pdev) 
	struct usb_hcd *hcd;

	struct ehci_hcd *ehci;

	struct resource *res;

	struct usb_phy *phy;

	int irq;

	int err;
@@ -101,15 +191,9 @@ static int exynos_ehci_probe(struct platform_device *pdev) 
					"samsung,exynos5440-ehci"))

		goto skip_phy;



	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);

	if (IS_ERR(phy)) {

		usb_put_hcd(hcd);

		dev_warn(&pdev->dev, "no platform data or transceiver defined\n");

		return -EPROBE_DEFER;

	} else {

		exynos_ehci->phy = phy;

		exynos_ehci->otg = phy->otg;

	}

	err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);

	if (err)

		goto fail_clk;



skip_phy:
@@ -151,8 +235,11 @@ skip_phy: 
	if (exynos_ehci->otg)

		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);



	if (exynos_ehci->phy)

		usb_phy_init(exynos_ehci->phy);

	err = exynos_ehci_phy_enable(&pdev->dev);

	if (err) {

		dev_err(&pdev->dev, "Failed to enable USB phy\n");

		goto fail_io;

	}



	ehci = hcd_to_ehci(hcd);

	ehci->caps = hcd->regs;
@@ -172,8 +259,7 @@ skip_phy: 
	return 0;



fail_add_hcd:

	if (exynos_ehci->phy)

		usb_phy_shutdown(exynos_ehci->phy);

	exynos_ehci_phy_disable(&pdev->dev);

fail_io:

	clk_disable_unprepare(exynos_ehci->clk);

fail_clk:
@@ -191,8 +277,7 @@ static int exynos_ehci_remove(struct platform_device *pdev) 
	if (exynos_ehci->otg)

		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);



	if (exynos_ehci->phy)

		usb_phy_shutdown(exynos_ehci->phy);

	exynos_ehci_phy_disable(&pdev->dev);



	clk_disable_unprepare(exynos_ehci->clk);
@@ -217,8 +302,7 @@ static int exynos_ehci_suspend(struct device *dev) 
	if (exynos_ehci->otg)

		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);



	if (exynos_ehci->phy)

		usb_phy_shutdown(exynos_ehci->phy);

	exynos_ehci_phy_disable(dev);



	clk_disable_unprepare(exynos_ehci->clk);
@@ -229,14 +313,19 @@ static int exynos_ehci_resume(struct device *dev) 
{

	struct usb_hcd *hcd = dev_get_drvdata(dev);

	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);

	int ret;



	clk_prepare_enable(exynos_ehci->clk);



	if (exynos_ehci->otg)

		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);



	if (exynos_ehci->phy)

		usb_phy_init(exynos_ehci->phy);

	ret = exynos_ehci_phy_enable(dev);

	if (ret) {

		dev_err(dev, "Failed to enable USB phy\n");

		clk_disable_unprepare(exynos_ehci->clk);

		return ret;

	}



	/* DMA burst Enable */

	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));

CRA Git | Maintained and supported by SUSTech CRA and CCSE