Commit 1ba8f9d3 authored by Hans de Goede's avatar Hans de Goede Committed by Takashi Iwai
Browse files

ALSA: hda: Add a power_save blacklist 

On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.

This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.

Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128

But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.

The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.

[ added an ifdef CONFIG_PM for the build error -- tiwai]

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611


Cc: stable@vger.kernel.org
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 7229b12f

sound/pci/hda/hda_intel.c

+36 −2
Original line number Diff line number Diff line
@@ -181,7 +181,7 @@ static const struct kernel_param_ops param_ops_xint = { 
};

#define param_check_xint param_check_int



static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;

static int power_save = -1;

module_param(power_save, xint, 0644);

MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "

		 "(in second, 0 = disable).");
@@ -2186,6 +2186,24 @@ out_free: 
	return err;

}



#ifdef CONFIG_PM

/* On some boards setting power_save to a non 0 value leads to clicking /

 * popping sounds when ever we enter/leave powersaving mode. Ideally we would

 * figure out how to avoid these sounds, but that is not always feasible.

 * So we keep a list of devices where we disable powersaving as its known

 * to causes problems on these devices.

 */

static struct snd_pci_quirk power_save_blacklist[] = {

	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */

	SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),

	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */

	SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),

	/* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */

	SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0),

	{}

};

#endif /* CONFIG_PM */



/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */

static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {

	[AZX_DRIVER_NVIDIA] = 8,
@@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx *chip) 
	struct hdac_bus *bus = azx_bus(chip);

	struct pci_dev *pci = chip->pci;

	int dev = chip->dev_index;

	int val;

	int err;



	hda->probe_continued = 1;
@@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx *chip) 


	chip->running = 1;

	azx_add_card_list(chip);

	snd_hda_set_power_save(&chip->bus, power_save * 1000);



	val = power_save;

#ifdef CONFIG_PM

	if (val == -1) {

		const struct snd_pci_quirk *q;



		val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;

		q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist);

		if (q && val) {

			dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n",

				 q->subvendor, q->subdevice);

			val = 0;

		}

	}

#endif /* CONFIG_PM */

	snd_hda_set_power_save(&chip->bus, val * 1000);

	if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo)

		pm_runtime_put_autosuspend(&pci->dev);

CRA Git | Maintained and supported by SUSTech CRA and CCSE