Commit 1a48e157 authored by Tony Lindgren's avatar Tony Lindgren
Browse files

ARM: OMAP2/3: Add generic smc91x support when connected to GPMC 



Convert the board-rx51 smc91x code to be generic and make
the boards to use it. This allows future recalculation of the
timings when the source clock gets scaled.

Also correct the rx51 interrupt to be IORESOURCE_IRQ_HIGHLEVEL.

Thanks to Paul Walmsley <paul@pwsan.com> for better GPMC timing
calculations.

Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent aa62e90f

arch/arm/mach-omap2/Makefile

+3 −0
Original line number Diff line number Diff line
@@ -61,3 +61,6 @@ endif 


onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o

obj-y					+= $(onenand-m) $(onenand-y)



smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o

obj-y					+= $(smc91x-m) $(smc91x-y)

arch/arm/mach-omap2/board-2430sdp.c

+22 −81
Original line number Diff line number Diff line
@@ -36,14 +36,11 @@ 
#include <mach/common.h>

#include <mach/gpmc.h>

#include <mach/usb.h>

#include <mach/gpmc-smc91x.h>



#include "mmc-twl4030.h"



#define SDP2430_CS0_BASE	0x04000000

#define	SDP2430_FLASH_CS	0

#define	SDP2430_SMC91X_CS	5



#define SDP2430_ETHR_GPIO_IRQ		149



static struct mtd_partition sdp2430_partitions[] = {

	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +96,43 @@ static struct platform_device sdp2430_flash_device = { 
	.resource	= &sdp2430_flash_resource,

};



static struct resource sdp2430_smc91x_resources[] = {

	[0] = {

		.start	= SDP2430_CS0_BASE,

		.end	= SDP2430_CS0_BASE + SZ_64M - 1,

		.flags	= IORESOURCE_MEM,

	},

	[1] = {

		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),

		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),

		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,

	},

};



static struct platform_device sdp2430_smc91x_device = {

	.name		= "smc91x",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),

	.resource	= sdp2430_smc91x_resources,

};



static struct platform_device *sdp2430_devices[] __initdata = {

	&sdp2430_smc91x_device,

	&sdp2430_flash_device,

};



static inline void __init sdp2430_init_smc91x(void)

{

	int eth_cs;

	unsigned long cs_mem_base;

	unsigned int rate;

	struct clk *gpmc_fck;

#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)



	eth_cs = SDP2430_SMC91X_CS;

static struct omap_smc91x_platform_data board_smc91x_data = {

	.cs		= 5,

	.gpio_irq	= 149,

	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |

				IORESOURCE_IRQ_LOWLEVEL,



	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */

	if (IS_ERR(gpmc_fck)) {

		WARN_ON(1);

		return;

	}

};



	clk_enable(gpmc_fck);

	rate = clk_get_rate(gpmc_fck);



	/* Make sure CS1 timings are correct, for 2430 always muxed */

	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);



	if (rate >= 160000000) {

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);

	} else if (rate >= 130000000) {

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);

	} else { /* rate = 100000000 */

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);

		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);

	}

static void __init board_smc91x_init(void)

{

	if (omap_rev() > OMAP3430_REV_ES1_0)

		board_smc91x_data.gpio_irq = 6;

	else

		board_smc91x_data.gpio_irq = 29;



	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {

		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");

		goto out;

	gpmc_smc91x_init(&board_smc91x_data);

}



	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;

	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;

	udelay(100);

#else



	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {

		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",

			SDP2430_ETHR_GPIO_IRQ);

		gpmc_cs_free(eth_cs);

		goto out;

static inline void board_smc91x_init(void)

{

}

	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);



out:

	clk_disable(gpmc_fck);

	clk_put(gpmc_fck);

}

#endif



static void __init omap_2430sdp_init_irq(void)

{

	omap2_init_common_hw(NULL);

	omap_init_irq();

	omap_gpio_init();

	sdp2430_init_smc91x();

}



static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -256,6 +196,7 @@ static void __init omap_2430sdp_init(void) 
	omap_serial_init();

	twl4030_mmc_init(mmc);

	usb_musb_init();

	board_smc91x_init();

}



static void __init omap_2430sdp_map_io(void)

arch/arm/mach-omap2/board-3430sdp.c

+28 −56
Original line number Diff line number Diff line
@@ -39,15 +39,12 @@ 


#include <mach/control.h>

#include <mach/keypad.h>

#include <mach/gpmc-smc91x.h>



#include "mmc-twl4030.h"



#define CONFIG_DISABLE_HFCLK 1



#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29

#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6

#define SDP3430_SMC91X_CS		3



#define SDP3430_TS_GPIO_IRQ_SDPV1	3

#define SDP3430_TS_GPIO_IRQ_SDPV2	2
@@ -56,24 +53,6 @@ 


#define TWL4030_MSECURE_GPIO 22



static struct resource sdp3430_smc91x_resources[] = {

	[0] = {

		.flags	= IORESOURCE_MEM,

	},

	[1] = {

		.start	= 0,

		.end	= 0,

		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,

	},

};



static struct platform_device sdp3430_smc91x_device = {

	.name		= "smc91x",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),

	.resource	= sdp3430_smc91x_resources,

};



static int sdp3430_keymap[] = {

	KEY(0, 0, KEY_LEFT),

	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +163,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = { 
};



static struct platform_device *sdp3430_devices[] __initdata = {

	&sdp3430_smc91x_device,

	&sdp3430_lcd_device,

};



static inline void __init sdp3430_init_smc91x(void)

{

	int eth_cs;

	unsigned long cs_mem_base;

	int eth_gpio = 0;



	eth_cs = SDP3430_SMC91X_CS;



	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {

		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");

		return;

	}



	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;

	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;

	udelay(100);



	if (omap_rev() > OMAP3430_REV_ES1_0)

		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;

	else

		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;



	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);



	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {

		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",

			eth_gpio);

		return;

	}

	gpio_direction_input(eth_gpio);

}



static void __init omap_3430sdp_init_irq(void)

{

	omap2_init_common_hw(NULL);

	omap_init_irq();

	omap_gpio_init();

	sdp3430_init_smc91x();

}



static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +451,32 @@ static int __init omap3430_i2c_init(void) 
	return 0;

}



#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)



static struct omap_smc91x_platform_data board_smc91x_data = {

	.cs		= 3,

	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |

				IORESOURCE_IRQ_LOWLEVEL,

};



static void __init board_smc91x_init(void)

{

	if (omap_rev() > OMAP3430_REV_ES1_0)

		board_smc91x_data.gpio_irq = 6;

	else

		board_smc91x_data.gpio_irq = 29;



	gpmc_smc91x_init(&board_smc91x_data);

}



#else



static inline void board_smc91x_init(void)

{

}



#endif



static void __init omap_3430sdp_init(void)

{

	omap3430_i2c_init();
@@ -522,6 +493,7 @@ static void __init omap_3430sdp_init(void) 
	ads7846_dev_init();

	omap_serial_init();

	usb_musb_init();

	board_smc91x_init();

}



static void __init omap_3430sdp_map_io(void)

arch/arm/mach-omap2/board-rx51-peripherals.c

+29 −117
Original line number Diff line number Diff line
@@ -28,31 +28,10 @@ 
#include <mach/gpmc.h>

#include <mach/keypad.h>

#include <mach/onenand.h>

#include <mach/gpmc-smc91x.h>



#include "mmc-twl4030.h"





#define SMC91X_CS			1

#define SMC91X_GPIO_IRQ			54

#define SMC91X_GPIO_RESET		164

#define SMC91X_GPIO_PWRDWN		86



static struct resource rx51_smc91x_resources[] = {

	[0] = {

		.flags		= IORESOURCE_MEM,

	},

	[1] = {

		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,

	},

};



static struct platform_device rx51_smc91x_device = {

	.name		= "smc91x",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),

	.resource	= rx51_smc91x_resources,

};



static int rx51_keymap[] = {

	KEY(0, 0, KEY_Q),

	KEY(0, 1, KEY_W),
@@ -108,98 +87,6 @@ static struct twl4030_keypad_data rx51_kp_data = { 
	.rep		= 1,

};



static struct platform_device *rx51_peripherals_devices[] = {

	&rx51_smc91x_device,

};



/*

 * Timings are taken from smsc-lan91c96-ms.pdf

 */

static int smc91x_init_gpmc(int cs)

{

	struct gpmc_timings t;

	const int t2_r = 45;		/* t2 in Figure 12.10 */

	const int t2_w = 30;		/* t2 in Figure 12.11 */

	const int t3 = 15;		/* t3 in Figure 12.10 */

	const int t5_r = 0;		/* t5 in Figure 12.10 */

	const int t6_r = 45;		/* t6 in Figure 12.10 */

	const int t6_w = 0;		/* t6 in Figure 12.11 */

	const int t7_w = 15;		/* t7 in Figure 12.11 */

	const int t15 = 12;		/* t15 in Figure 12.2 */

	const int t20 = 185;		/* t20 in Figure 12.2 */



	memset(&t, 0, sizeof(t));



	t.cs_on = t15;

	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */

	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */

	t.adv_on = t3;			/* Figure 12.10 */

	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */

	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */

	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */

	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */

	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */

	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */

	t.rd_cycle = t20;		/* Figure 12.2 */

	t.wr_cycle = t20;		/* Figure 12.4 */

	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */

	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */



	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);



	return gpmc_cs_set_timings(cs, &t);

}



static void __init rx51_init_smc91x(void)

{

	unsigned long cs_mem_base;

	int ret;



	omap_cfg_reg(U8_34XX_GPIO54_DOWN);

	omap_cfg_reg(G25_34XX_GPIO86_OUT);

	omap_cfg_reg(H19_34XX_GPIO164_OUT);



	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {

		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");

		return;

	}



	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;

	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;



	smc91x_init_gpmc(SMC91X_CS);



	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)

		goto free1;



	gpio_direction_input(SMC91X_GPIO_IRQ);

	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);



	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");

	if (ret)

		goto free2;

	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);



	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");

	if (ret)

		goto free3;

	gpio_direction_output(SMC91X_GPIO_RESET, 0);

	gpio_set_value(SMC91X_GPIO_RESET, 1);

	msleep(100);

	gpio_set_value(SMC91X_GPIO_RESET, 0);



	return;



free3:

	gpio_free(SMC91X_GPIO_PWRDWN);

free2:

	gpio_free(SMC91X_GPIO_IRQ);

free1:

	gpmc_cs_free(SMC91X_CS);



	printk(KERN_ERR "Could not initialize smc91x\n");

}



static struct twl4030_madc_platform_data rx51_madc_data = {

	.irq_line		= 1,

};
@@ -466,12 +353,37 @@ static inline void board_onenand_init(void) 


#endif



#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)



static struct omap_smc91x_platform_data board_smc91x_data = {

	.cs		= 1,

	.gpio_irq	= 54,

	.gpio_pwrdwn	= 86,

	.gpio_reset	= 164,

	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,

};



static void __init board_smc91x_init(void)

{

	omap_cfg_reg(U8_34XX_GPIO54_DOWN);

	omap_cfg_reg(G25_34XX_GPIO86_OUT);

	omap_cfg_reg(H19_34XX_GPIO164_OUT);



	gpmc_smc91x_init(&board_smc91x_data);

}



#else



static inline void board_smc91x_init(void)

{

}



#endif



void __init rx51_peripherals_init(void)

{

	platform_add_devices(rx51_peripherals_devices,

				ARRAY_SIZE(rx51_peripherals_devices));

	rx51_i2c_init();

	rx51_init_smc91x();

	board_onenand_init();

	board_smc91x_init();

}

arch/arm/mach-omap2/gpmc-smc91x.c

0 → 100644
+189 −0
Original line number Diff line number Diff line 
/*

 * linux/arch/arm/mach-omap2/gpmc-smc91x.c

 *

 * Copyright (C) 2009 Nokia Corporation

 * Contact:	Tony Lindgren

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <linux/kernel.h>

#include <linux/platform_device.h>

#include <linux/gpio.h>

#include <linux/delay.h>

#include <linux/interrupt.h>

#include <linux/io.h>

#include <linux/smc91x.h>



#include <mach/board.h>

#include <mach/gpmc.h>

#include <mach/gpmc-smc91x.h>



static struct omap_smc91x_platform_data *gpmc_cfg;



static struct resource gpmc_smc91x_resources[] = {

	[0] = {

		.flags		= IORESOURCE_MEM,

	},

	[1] = {

		.flags		= IORESOURCE_IRQ,

	},

};



static struct smc91x_platdata gpmc_smc91x_info = {

	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,

};



static struct platform_device gpmc_smc91x_device = {

	.name		= "smc91x",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),

	.resource	= gpmc_smc91x_resources,

	.dev		= {

		.platform_data = &gpmc_smc91x_info,

	},

};



/*

 * Set the gpmc timings for smc91c96. The timings are taken

 * from the data sheet available at:

 * http://www.smsc.com/main/catalog/lan91c96.html

 * REVISIT: Level shifters can add at least to the access latency.

 */

static int smc91c96_gpmc_retime(void)

{

	struct gpmc_timings t;

	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */

	const int t4_r = 20;	/* Figure 12.2 read */

	const int t4_w = 5;	/* Figure 12.4 write */

	const int t5 = 25;	/* Figure 12.2 read */

	const int t6 = 15;	/* Figure 12.2 read */

	const int t7 = 5;	/* Figure 12.4 write */

	const int t8 = 5;	/* Figure 12.4 write */

	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */

	u32 l;



	memset(&t, 0, sizeof(t));



	/* Read timings */

	t.cs_on = 0;

	t.adv_on = t.cs_on;

	t.oe_on = t.adv_on + t3;

	t.access = t.oe_on + t5;

	t.oe_off = t.access;

	t.adv_rd_off = t.oe_off + max(t4_r, t6);

	t.cs_rd_off = t.oe_off;

	t.rd_cycle = t20 - t.oe_on;



	/* Write timings */

	t.we_on = t.adv_on + t3;



	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {

		t.wr_data_mux_bus = t.we_on;

		t.we_off = t.wr_data_mux_bus + t7;

	} else

		t.we_off = t.we_on + t7;

	if (cpu_is_omap34xx())

		t.wr_access = t.we_off;

	t.adv_wr_off = t.we_off + max(t4_w, t8);

	t.cs_wr_off = t.we_off + t4_w;

	t.wr_cycle = t20 - t.we_on;



	l = GPMC_CONFIG1_DEVICESIZE_16;

	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)

		l |= GPMC_CONFIG1_MUXADDDATA;

	if (gpmc_cfg->flags & GPMC_READ_MON)

		l |= GPMC_CONFIG1_WAIT_READ_MON;

	if (gpmc_cfg->flags & GPMC_WRITE_MON)

		l |= GPMC_CONFIG1_WAIT_WRITE_MON;

	if (gpmc_cfg->wait_pin)

		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);

	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);



	/*

	 * FIXME: Calculate the address and data bus muxed timings.

	 * Note that at least adv_rd_off needs to be changed according

	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the

	 * FPGA in between smc91x and omap as the timings are different

	 * from above?

	 */

	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)

		return 0;



	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);

}



/*

 * Initialize smc91x device connected to the GPMC. Note that we

 * assume that pin multiplexing is done in the board-*.c file,

 * or in the bootloader.

 */

void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)

{

	unsigned long cs_mem_base;

	int ret;



	gpmc_cfg = board_data;



	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)

		gpmc_cfg->retime = smc91c96_gpmc_retime;



	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {

		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");

		return;

	}



	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;

	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;

	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);



	if (gpmc_cfg->retime) {

		ret = gpmc_cfg->retime();

		if (ret != 0)

			goto free1;

	}



	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)

		goto free1;



	gpio_direction_input(gpmc_cfg->gpio_irq);

	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);



	if (gpmc_cfg->gpio_pwrdwn) {

		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");

		if (ret)

			goto free2;

		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);

	}



	if (gpmc_cfg->gpio_reset) {

		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");

		if (ret)

			goto free3;



		gpio_direction_output(gpmc_cfg->gpio_reset, 0);

		gpio_set_value(gpmc_cfg->gpio_reset, 1);

		msleep(100);

		gpio_set_value(gpmc_cfg->gpio_reset, 0);

	}



	if (platform_device_register(&gpmc_smc91x_device) < 0) {

		printk(KERN_ERR "Unable to register smc91x device\n");

		gpio_free(gpmc_cfg->gpio_reset);

		goto free3;

	}



	return;



free3:

	if (gpmc_cfg->gpio_pwrdwn)

		gpio_free(gpmc_cfg->gpio_pwrdwn);

free2:

	gpio_free(gpmc_cfg->gpio_irq);

free1:

	gpmc_cs_free(gpmc_cfg->cs);



	printk(KERN_ERR "Could not initialize smc91x\n");

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE