nvmem: Add Spreadtrum SC27XX efuse support (19c54468) · Commits · 戴 / test

drivers/nvmem/Kconfig

+11 −0

Original line number	Diff line number	Diff line
		@@ -181,4 +181,15 @@ config RAVE_SP_EEPROM
		help
		Say y here to enable Rave SP EEPROM support.

		config SC27XX_EFUSE
		tristate "Spreadtrum SC27XX eFuse Support"
		depends on MFD_SC27XX_PMIC \|\| COMPILE_TEST
		depends on HAS_IOMEM
		help
		This is a simple driver to dump specified values of Spreadtrum
		SC27XX PMICs from eFuse.

		This driver can also be built as a module. If so, the module
		will be called nvmem-sc27xx-efuse.

		endif

drivers/nvmem/Makefile

+2 −1

Original line number	Diff line number	Diff line
		@@ -39,4 +39,5 @@ obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
		nvmem_snvs_lpgpr-y := snvs_lpgpr.o
		obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
		nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o

		obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
		nvmem-sc27xx-efuse-y := sc27xx-efuse.o

drivers/nvmem/sc27xx-efuse.c

0 → 100644

+264 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (C) 2018 Spreadtrum Communications Inc.

		#include <linux/hwspinlock.h>
		#include <linux/module.h>
		#include <linux/of.h>
		#include <linux/platform_device.h>
		#include <linux/regmap.h>
		#include <linux/nvmem-provider.h>

		/* PMIC global registers definition */
		#define SC27XX_MODULE_EN 0xc08
		#define SC27XX_EFUSE_EN BIT(6)

		/* Efuse controller registers definition */
		#define SC27XX_EFUSE_GLB_CTRL 0x0
		#define SC27XX_EFUSE_DATA_RD 0x4
		#define SC27XX_EFUSE_DATA_WR 0x8
		#define SC27XX_EFUSE_BLOCK_INDEX 0xc
		#define SC27XX_EFUSE_MODE_CTRL 0x10
		#define SC27XX_EFUSE_STATUS 0x14
		#define SC27XX_EFUSE_WR_TIMING_CTRL 0x20
		#define SC27XX_EFUSE_RD_TIMING_CTRL 0x24
		#define SC27XX_EFUSE_EFUSE_DEB_CTRL 0x28

		/* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */
		#define SC27XX_EFUSE_BLOCK_MASK GENMASK(4, 0)

		/* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */
		#define SC27XX_EFUSE_PG_START BIT(0)
		#define SC27XX_EFUSE_RD_START BIT(1)
		#define SC27XX_EFUSE_CLR_RDDONE BIT(2)

		/* Bits definitions for SC27XX_EFUSE_STATUS register */
		#define SC27XX_EFUSE_PGM_BUSY BIT(0)
		#define SC27XX_EFUSE_READ_BUSY BIT(1)
		#define SC27XX_EFUSE_STANDBY BIT(2)
		#define SC27XX_EFUSE_GLOBAL_PROT BIT(3)
		#define SC27XX_EFUSE_RD_DONE BIT(4)

		/* Block number and block width (bytes) definitions */
		#define SC27XX_EFUSE_BLOCK_MAX 32
		#define SC27XX_EFUSE_BLOCK_WIDTH 2

		/* Timeout (ms) for the trylock of hardware spinlocks */
		#define SC27XX_EFUSE_HWLOCK_TIMEOUT 5000

		/* Timeout (us) of polling the status */
		#define SC27XX_EFUSE_POLL_TIMEOUT 3000000
		#define SC27XX_EFUSE_POLL_DELAY_US 10000

		struct sc27xx_efuse {
		struct device *dev;
		struct regmap *regmap;
		struct hwspinlock *hwlock;
		struct mutex mutex;
		u32 base;
		};

		/*
		* On Spreadtrum platform, we have multi-subsystems will access the unique
		* efuse controller, so we need one hardware spinlock to synchronize between
		* the multiple subsystems.
		*/
		static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse)
		{
		int ret;

		mutex_lock(&efuse->mutex);

		ret = hwspin_lock_timeout_raw(efuse->hwlock,
		SC27XX_EFUSE_HWLOCK_TIMEOUT);
		if (ret) {
		dev_err(efuse->dev, "timeout to get the hwspinlock\n");
		mutex_unlock(&efuse->mutex);
		return ret;
		}

		return 0;
		}

		static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse)
		{
		hwspin_unlock_raw(efuse->hwlock);
		mutex_unlock(&efuse->mutex);
		}

		static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits)
		{
		int ret;
		u32 val;

		ret = regmap_read_poll_timeout(efuse->regmap,
		efuse->base + SC27XX_EFUSE_STATUS,
		val, (val & bits),
		SC27XX_EFUSE_POLL_DELAY_US,
		SC27XX_EFUSE_POLL_TIMEOUT);
		if (ret) {
		dev_err(efuse->dev, "timeout to update the efuse status\n");
		return ret;
		}

		return 0;
		}

		static int sc27xx_efuse_read(void context, u32 offset, void val, size_t bytes)
		{
		struct sc27xx_efuse *efuse = context;
		u32 buf;
		int ret;

		if (offset > SC27XX_EFUSE_BLOCK_MAX \|\| bytes > SC27XX_EFUSE_BLOCK_WIDTH)
		return -EINVAL;

		ret = sc27xx_efuse_lock(efuse);
		if (ret)
		return ret;

		/* Enable the efuse controller. */
		ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
		SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
		if (ret)
		goto unlock_efuse;

		/*
		* Before reading, we should ensure the efuse controller is in
		* standby state.
		*/
		ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY);
		if (ret)
		goto disable_efuse;

		/* Set the block address to be read. */
		ret = regmap_write(efuse->regmap,
		efuse->base + SC27XX_EFUSE_BLOCK_INDEX,
		offset & SC27XX_EFUSE_BLOCK_MASK);
		if (ret)
		goto disable_efuse;

		/* Start reading process from efuse memory. */
		ret = regmap_update_bits(efuse->regmap,
		efuse->base + SC27XX_EFUSE_MODE_CTRL,
		SC27XX_EFUSE_RD_START,
		SC27XX_EFUSE_RD_START);
		if (ret)
		goto disable_efuse;

		/*
		* Polling the read done status to make sure the reading process
		* is completed, that means the data can be read out now.
		*/
		ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE);
		if (ret)
		goto disable_efuse;

		/* Read data from efuse memory. */
		ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD,
		&buf);
		if (ret)
		goto disable_efuse;

		/* Clear the read done flag. */
		ret = regmap_update_bits(efuse->regmap,
		efuse->base + SC27XX_EFUSE_MODE_CTRL,
		SC27XX_EFUSE_CLR_RDDONE,
		SC27XX_EFUSE_CLR_RDDONE);

		disable_efuse:
		/* Disable the efuse controller after reading. */
		regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
		unlock_efuse:
		sc27xx_efuse_unlock(efuse);

		if (!ret)
		memcpy(val, &buf, bytes);

		return ret;
		}

		static int sc27xx_efuse_probe(struct platform_device *pdev)
		{
		struct device_node *np = pdev->dev.of_node;
		struct nvmem_config econfig = { };
		struct nvmem_device *nvmem;
		struct sc27xx_efuse *efuse;
		int ret;

		efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
		if (!efuse)
		return -ENOMEM;

		efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL);
		if (!efuse->regmap) {
		dev_err(&pdev->dev, "failed to get efuse regmap\n");
		return -ENODEV;
		}

		ret = of_property_read_u32(np, "reg", &efuse->base);
		if (ret) {
		dev_err(&pdev->dev, "failed to get efuse base address\n");
		return ret;
		}

		ret = of_hwspin_lock_get_id(np, 0);
		if (ret < 0) {
		dev_err(&pdev->dev, "failed to get hwspinlock id\n");
		return ret;
		}

		efuse->hwlock = hwspin_lock_request_specific(ret);
		if (!efuse->hwlock) {
		dev_err(&pdev->dev, "failed to request hwspinlock\n");
		return -ENXIO;
		}

		mutex_init(&efuse->mutex);
		efuse->dev = &pdev->dev;
		platform_set_drvdata(pdev, efuse);

		econfig.stride = 1;
		econfig.word_size = 1;
		econfig.read_only = true;
		econfig.name = "sc27xx-efuse";
		econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH;
		econfig.reg_read = sc27xx_efuse_read;
		econfig.priv = efuse;
		econfig.dev = &pdev->dev;
		nvmem = devm_nvmem_register(&pdev->dev, &econfig);
		if (IS_ERR(nvmem)) {
		dev_err(&pdev->dev, "failed to register nvmem config\n");
		hwspin_lock_free(efuse->hwlock);
		return PTR_ERR(nvmem);
		}

		return 0;
		}

		static int sc27xx_efuse_remove(struct platform_device *pdev)
		{
		struct sc27xx_efuse *efuse = platform_get_drvdata(pdev);

		hwspin_lock_free(efuse->hwlock);
		return 0;
		}

		static const struct of_device_id sc27xx_efuse_of_match[] = {
		{ .compatible = "sprd,sc2731-efuse" },
		{ }
		};

		static struct platform_driver sc27xx_efuse_driver = {
		.probe = sc27xx_efuse_probe,
		.remove = sc27xx_efuse_remove,
		.driver = {
		.name = "sc27xx-efuse",
		.of_match_table = sc27xx_efuse_of_match,
		},
		};

		module_platform_driver(sc27xx_efuse_driver);

		MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
		MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver");
		MODULE_LICENSE("GPL v2");

Admin message