ARM: dts: sun4i: Add initial dts for Gemei G9 tablet

	sun4i-a10-ba10-tvbox.dtb \

	sun4i-a10-chuwi-v7-cw0825.dtb \

	sun4i-a10-cubieboard.dtb \

	sun4i-a10-gemei-g9.dtb \

	sun4i-a10-hackberry.dtb \

	sun4i-a10-hyundai-a7hd.dtb \

	sun4i-a10-inet97fv2.dtb \

	sun4i-a10-marsboard.dtb \

	sun4i-a10-mini-xplus.dtb \

	sun4i-a10-mk802.dtb \

	sun4i-a10-mk802ii.dtb \

	sun4i-a10-hackberry.dtb \

	sun4i-a10-hyundai-a7hd.dtb \

	sun4i-a10-inet97fv2.dtb \

	sun4i-a10-olinuxino-lime.dtb \

	sun4i-a10-pcduino.dtb

dtb-$(CONFIG_MACH_SUN5I) += \

/*

 * Copyright 2015 Priit Laes

 *

 * Priit Laes <plaes@plaes.org>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun4i-a10.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

/ {

	model = "Gemei G9 Tablet";

	compatible = "gemei,g9", "allwinner,sun4i-a10";

};

/*

 * TODO:

 *   2x cameras via CSI

 *   bma250 IRQs

 *   AXP battery management

 *   NAND

 *   OTG

 *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48

 */

&ehci0 {

	status = "okay";

};

&ehci1 {

	status = "okay";

};

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

	axp209: pmic@34 {

		compatible = "x-powers,axp209";

		reg = <0x34>;

		interrupts = <0>;

		interrupt-controller;

		#interrupt-cells = <1>;

	};

};

&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	status = "okay";

	/* Accelerometer */

	bma250@18 {

		compatible = "bosch,bma250";

		reg = <0x18>;

		/*

		 * TODO: interrupt pins:

		 * int1 - PH00

		 * int2 - PI10

		 */

	};

};

&lradc {

	vref-supply = <&reg_vcc3v0>;

	status = "okay";

	button@158 {

		label = "Volume Down";

		linux,code = <KEY_VOLUMEDOWN>;

		channel = <0>;

		voltage = <158730>;

	};

	button@349 {

		label = "Volume Up";

		linux,code = <KEY_VOLUMEUP>;

		channel = <0>;

		voltage = <349206>;

	};

	button@1142 {

		label = "Esc";

		linux,code = <KEY_ESC>;

		channel = <0>;

		voltage = <1142856>;

	};

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */

	cd-inverted;

	status = "okay";

};

&reg_usb1_vbus {

	status = "okay";

};

&reg_usb2_vbus {

	status = "okay";

};

&uart0  {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};

&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

};