mfd: cros_ec: Fix temperature API (170309b4) · Commits · 戴 / test

include/linux/mfd/cros_ec_commands.h

+57 −7

Original line number	Diff line number	Diff line
		@@ -2945,9 +2945,28 @@ enum ec_temp_thresholds {
		/*
		* Thermal configuration for one temperature sensor. Temps are in degrees K.
		* Zero values will be silently ignored by the thermal task.
		*
		* Set 'temp_host' value allows thermal task to trigger some event with 1 degree
		* hysteresis.
		* For example,
		* temp_host[EC_TEMP_THRESH_HIGH] = 300 K
		* temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K
		* EC will throttle ap when temperature >= 301 K, and release throttling when
		* temperature <= 299 K.
		*
		* Set 'temp_host_release' value allows thermal task has a custom hysteresis.
		* For example,
		* temp_host[EC_TEMP_THRESH_HIGH] = 300 K
		* temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K
		* EC will throttle ap when temperature >= 301 K, and release throttling when
		* temperature <= 294 K.
		*
		* Note that this structure is a sub-structure of
		* ec_params_thermal_set_threshold_v1, but maintains its alignment there.
		*/
		struct ec_thermal_config {
		uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
		uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */
		uint32_t temp_fan_off; /* no active cooling needed */
		uint32_t temp_fan_max; /* max active cooling needed */
		} __ec_align4;
		@@ -2973,32 +2992,63 @@ struct ec_params_thermal_set_threshold_v1 {
		/* Toggle automatic fan control */
		#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052

		/* Get TMP006 calibration data */
		/* Version 1 of input params */
		struct ec_params_auto_fan_ctrl_v1 {
		uint8_t fan_idx;
		} __ec_align1;

		/* Get/Set TMP006 calibration data */
		#define EC_CMD_TMP006_GET_CALIBRATION 0x0053
		#define EC_CMD_TMP006_SET_CALIBRATION 0x0054

		/*
		* The original TMP006 calibration only needed four params, but now we need
		* more. Since the algorithm is nothing but magic numbers anyway, we'll leave
		* the params opaque. The v1 "get" response will include the algorithm number
		* and how many params it requires. That way we can change the EC code without
		* needing to update this file. We can also use a different algorithm on each
		* sensor.
		*/

		/* This is the same struct for both v0 and v1. */
		struct ec_params_tmp006_get_calibration {
		uint8_t index;
		} __ec_align1;

		struct ec_response_tmp006_get_calibration {
		/* Version 0 */
		struct ec_response_tmp006_get_calibration_v0 {
		float s0;
		float b0;
		float b1;
		float b2;
		} __ec_align4;

		/* Set TMP006 calibration data */
		#define EC_CMD_TMP006_SET_CALIBRATION 0x0054

		struct ec_params_tmp006_set_calibration {
		struct ec_params_tmp006_set_calibration_v0 {
		uint8_t index;
		uint8_t reserved[3]; /* Reserved; set 0 */
		uint8_t reserved[3];
		float s0;
		float b0;
		float b1;
		float b2;
		} __ec_align4;

		/* Version 1 */
		struct ec_response_tmp006_get_calibration_v1 {
		uint8_t algorithm;
		uint8_t num_params;
		uint8_t reserved[2];
		float val[0];
		} __ec_align4;

		struct ec_params_tmp006_set_calibration_v1 {
		uint8_t index;
		uint8_t algorithm;
		uint8_t num_params;
		uint8_t reserved;
		float val[0];
		} __ec_align4;


		/* Read raw TMP006 data */
		#define EC_CMD_TMP006_GET_RAW 0x0055

Admin message