Commit 16caf1fa authored by Loic Poulain's avatar Loic Poulain Committed by Peter Chen
Browse files

usb: chipidea: Add dynamic pinctrl selection 



Some hardware implementations require to configure pins differently
according to the USB role (host/device), this can be an update of the
pins routing or a simple GPIO value change.

This patch introduces new optional "host" and "device" pinctrls.
If these pinctrls are defined by the device, they are respectively
selected on host/device role start.

If a default pinctrl exist, it is restored on host/device role stop.

Signed-off-by: default avatarLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: default avatarPeter Chen <peter.chen@nxp.com>
parent 1f06072c

drivers/usb/chipidea/core.c

+19 −0
Original line number Diff line number Diff line
@@ -53,6 +53,7 @@ 
#include <linux/kernel.h>

#include <linux/slab.h>

#include <linux/pm_runtime.h>

#include <linux/pinctrl/consumer.h>

#include <linux/usb/ch9.h>

#include <linux/usb/gadget.h>

#include <linux/usb/otg.h>
@@ -723,6 +724,24 @@ static int ci_get_platdata(struct device *dev, 
		else

			cable->connected = false;

	}



	platdata->pctl = devm_pinctrl_get(dev);

	if (!IS_ERR(platdata->pctl)) {

		struct pinctrl_state *p;



		p = pinctrl_lookup_state(platdata->pctl, "default");

		if (!IS_ERR(p))

			platdata->pins_default = p;



		p = pinctrl_lookup_state(platdata->pctl, "host");

		if (!IS_ERR(p))

			platdata->pins_host = p;



		p = pinctrl_lookup_state(platdata->pctl, "device");

		if (!IS_ERR(p))

			platdata->pins_device = p;

	}



	return 0;

}

drivers/usb/chipidea/host.c

+9 −0
Original line number Diff line number Diff line
@@ -13,6 +13,7 @@ 
#include <linux/usb/hcd.h>

#include <linux/usb/chipidea.h>

#include <linux/regulator/consumer.h>

#include <linux/pinctrl/consumer.h>



#include "../host/ehci.h"
@@ -153,6 +154,10 @@ static int host_start(struct ci_hdrc *ci) 
		}

	}



	if (ci->platdata->pins_host)

		pinctrl_select_state(ci->platdata->pctl,

				     ci->platdata->pins_host);



	ret = usb_add_hcd(hcd, 0, 0);

	if (ret) {

		goto disable_reg;
@@ -197,6 +202,10 @@ static void host_stop(struct ci_hdrc *ci) 
	}

	ci->hcd = NULL;

	ci->otg.host = NULL;



	if (ci->platdata->pins_host && ci->platdata->pins_default)

		pinctrl_select_state(ci->platdata->pctl,

				     ci->platdata->pins_default);

}

drivers/usb/chipidea/udc.c

+9 −0
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@ 
#include <linux/kernel.h>

#include <linux/slab.h>

#include <linux/pm_runtime.h>

#include <linux/pinctrl/consumer.h>

#include <linux/usb/ch9.h>

#include <linux/usb/gadget.h>

#include <linux/usb/otg-fsm.h>
@@ -1965,6 +1966,10 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) 


static int udc_id_switch_for_device(struct ci_hdrc *ci)

{

	if (ci->platdata->pins_device)

		pinctrl_select_state(ci->platdata->pctl,

				     ci->platdata->pins_device);



	if (ci->is_otg)

		/* Clear and enable BSV irq */

		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
@@ -1983,6 +1988,10 @@ static void udc_id_switch_for_host(struct ci_hdrc *ci) 
		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);



	ci->vbus_active = 0;



	if (ci->platdata->pins_device && ci->platdata->pins_default)

		pinctrl_select_state(ci->platdata->pctl,

				     ci->platdata->pins_default);

}



/**

include/linux/usb/chipidea.h

+6 −0
Original line number Diff line number Diff line
@@ -77,6 +77,12 @@ struct ci_hdrc_platform_data { 
	struct ci_hdrc_cable		vbus_extcon;

	struct ci_hdrc_cable		id_extcon;

	u32			phy_clkgate_delay_us;



	/* pins */

	struct pinctrl *pctl;

	struct pinctrl_state *pins_default;

	struct pinctrl_state *pins_host;

	struct pinctrl_state *pins_device;

};



/* Default offset of capability registers */

CRA Git | Maintained and supported by SUSTech CRA and CCSE