Commit 16b2a7d4 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box 



The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
the same dts for both models. Unfortunately this does not work for the otg
controller, on the M9 this is routed to a micro-usb connector on the outside,
while as on the A1000G-quad it is connected to an usb to sata bridge
(which is not populated on the M9 pcb).

This commit adds a new dts for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 19f5c703

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -551,6 +551,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ 
	sun6i-a31-hummingbird.dtb \

	sun6i-a31-i7.dtb \

	sun6i-a31-m9.dtb \

	sun6i-a31-mele-a1000g-quad.dtb \

	sun6i-a31s-cs908.dtb

dtb-$(CONFIG_MACH_SUN7I) += \

	sun7i-a20-bananapi.dtb \

arch/arm/boot/dts/sun6i-a31-m9.dts

+1 −1
Original line number Diff line number Diff line
@@ -48,7 +48,7 @@ 
#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	model = "Mele M9 / A1000G Quad top set box";

	model = "Mele M9 top set box";

	compatible = "mele,m9", "allwinner,sun6i-a31";



	aliases {

arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts

0 → 100644
+149 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun6i-a31.dtsi"

#include "sunxi-common-regulators.dtsi"



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	model = "Mele A1000G Quad top set box";

	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";



	aliases {

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_m9>;



		blue {

			label = "m9:blue:usr";

			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;

		};

	};

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&gmac {

	pinctrl-names = "default";

	pinctrl-0 = <&gmac_pins_mii_a>;

	phy = <&phy1>;

	phy-mode = "mii";

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};



&ir {

	pinctrl-names = "default";

	pinctrl-0 = <&ir_pins_a>;

	status = "okay";

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */

	cd-inverted;

	status = "okay";

};



&pio {

	led_pins_m9: led_pins@0 {

		allwinner,pins = "PH13";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	mmc0_cd_pin_m9: mmc0_cd_pin@0 {

		allwinner,pins = "PH22";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	usb1_vbus_pin_m9: usb1_vbus_pin@0 {

		allwinner,pins = "PC27";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};



&reg_usb1_vbus {

	pinctrl-names = "default";

	pinctrl-0 = <&usb1_vbus_pin_m9>;

	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE