Commit 169b245a authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge tag 'fixes-for-v3.7-rc4' of... 

Merge tag 'fixes-for-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

usb: fixes for v3.7-rc4

We're reverting MUSB Mode 1 DMA patch which caused many regressions. Meanwhile
Roger is cooking a better version of that patch, which will hopefully be ready
for v3.8 merge window.

We also fix an undeclared error in ux5000_remove() and another build error
when we try to build USB_MUSB_OMAP2PLUS as a module.
parents 8f0d8163 f6bc8c29

drivers/usb/musb/musb_gadget.c

+26 −4
Original line number Diff line number Diff line
@@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req) 
		fifo_count = musb_readw(epio, MUSB_RXCOUNT);



		/*

		 *  use mode 1 only if we expect data of at least ep packet_sz

		 *  and have not yet received a short packet

		 * Enable Mode 1 on RX transfers only when short_not_ok flag

		 * is set. Currently short_not_ok flag is set only from

		 * file_storage and f_mass_storage drivers

		 */

		if ((request->length - request->actual >= musb_ep->packet_sz) &&

			(fifo_count >= musb_ep->packet_sz))



		if (request->short_not_ok && fifo_count == musb_ep->packet_sz)

			use_mode_1 = 1;

		else

			use_mode_1 = 0;
@@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) 
				c = musb->dma_controller;

				channel = musb_ep->dma;



	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in

	 * mode 0 only. So we do not get endpoint interrupts due to DMA

	 * completion. We only get interrupts from DMA controller.

	 *

	 * We could operate in DMA mode 1 if we knew the size of the tranfer

	 * in advance. For mass storage class, request->length = what the host

	 * sends, so that'd work.  But for pretty much everything else,

	 * request->length is routinely more than what the host sends. For

	 * most these gadgets, end of is signified either by a short packet,

	 * or filling the last byte of the buffer.  (Sending extra data in

	 * that last pckate should trigger an overflow fault.)  But in mode 1,

	 * we don't get DMA completion interrupt for short packets.

	 *

	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),

	 * to get endpoint interrupt on every DMA req, but that didn't seem

	 * to work reliably.

	 *

	 * REVISIT an updated g_file_storage can set req->short_not_ok, which

	 * then becomes usable as a runtime "use mode 1" hint...

	 */



				/* Experimental: Mode1 works with mass storage use cases */

				if (use_mode_1) {

					csr |= MUSB_RXCSR_AUTOCLEAR;

drivers/usb/musb/ux500.c

+1 −1
Original line number Diff line number Diff line
@@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev) 
	struct platform_device		*musb;

	struct ux500_glue		*glue;

	struct clk			*clk;



	int				musbid;

	int				ret = -ENOMEM;



	glue = kzalloc(sizeof(*glue), GFP_KERNEL);

drivers/usb/otg/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT 


config TWL4030_USB

	tristate "TWL4030 USB Transceiver Driver"

	depends on TWL4030_CORE && REGULATOR_TWL4030

	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@ config TWL4030_USB 


config TWL6030_USB

	tristate "TWL6030 USB Transceiver Driver"

	depends on TWL4030_CORE && OMAP_USB2

	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on TWL6030

CRA Git | Maintained and supported by SUSTech CRA and CCSE