Commit 15e0c694 authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds
Browse files

[PATCH] ide: fix Jmicron support 



Prior to 2.6.18rc1 you could install with devices on a JMicron chipset
using the "all-generic-ide" option. As of this kernel the AHCI driver
grabs the controller and rams it into AHCI mode losing the PATA ports
and making CD drives and the like vanish. The all-generic-ide option
fails because the AHCI driver grabbed the PCI device and reconfigured
it.

To fix this three things are needed.

#1 We must put the chip into dual function mode
#2 The AHCI driver must grab only function 0 (already in your rc1 tree)
#3 Something must grab the PATA ports

The attached patch is the minimal risk edition of this. It puts the chip
into dual function mode so that AHCI will grab the SATA ports without
losing the PATA ports. To keep the risk as low as possible the third
patch adds the PCI identifiers for the PATA port and the FN check to the
ide-generic driver. There is a more featured jmicron driver on its way
but that adds risk and the ide-generic support is sufficient to install
and run a system.

The actual chip setup done by the quirk is the precise setup recommended
by the vendor.

(The JMB368 appears only in the ide-generic entry as it has no AHCI so
does not need the quirk)

Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Acked-by: default avatarJeff Garzik <jgarzik@pobox.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent f6dc8c5b

drivers/ide/pci/generic.c

+8 −0
Original line number Diff line number Diff line
@@ -212,6 +212,9 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi 
	    (!(PCI_FUNC(dev->devfn) & 1)))

		goto out;



	if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)

		goto out;



	pci_read_config_word(dev, PCI_COMMAND, &command);

	if (!(command & PCI_COMMAND_IO)) {

		printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
@@ -239,6 +242,11 @@ static struct pci_device_id generic_pci_tbl[] = { 
	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},

	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},

	{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},

	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},

	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},

	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},

	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},

	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},

	/* Must come last. If you add entries adjust this table appropriately and the init_one code */

	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},

	{ 0, },

drivers/pci/quirks.c

+49 −0
Original line number Diff line number Diff line
@@ -1175,6 +1175,55 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_ 
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus );

DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus );



#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE)



/*

 *	If we are using libata we can drive this chip properly but must

 *	do this early on to make the additional device appear during

 *	the PCI scanning.

 */



static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)

{

	u32 conf;

	u8 hdr;



	/* Only poke fn 0 */

	if (PCI_FUNC(pdev->devfn))

		return;



	switch(pdev->device) {

		case PCI_DEVICE_ID_JMICRON_JMB365:

		case PCI_DEVICE_ID_JMICRON_JMB366:

			/* Redirect IDE second PATA port to the right spot */

			pci_read_config_dword(pdev, 0x80, &conf);

			conf |= (1 << 24);

			/* Fall through */

			pci_write_config_dword(pdev, 0x80, conf);

		case PCI_DEVICE_ID_JMICRON_JMB361:

		case PCI_DEVICE_ID_JMICRON_JMB363:

			pci_read_config_dword(pdev, 0x40, &conf);

			/* Enable dual function mode, AHCI on fn 0, IDE fn1 */

			/* Set the class codes correctly and then direct IDE 0 */

			conf &= ~0x000F0200;	/* Clear bit 9 and 16-19 */

			conf |=  0x00C20002;	/* Set bit 1, 17, 22, 23 */

			pci_write_config_dword(pdev, 0x40, conf);



			/* Reconfigure so that the PCI scanner discovers the

			   device is now multifunction */



			pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);

			pdev->hdr_type = hdr & 0x7f;

			pdev->multifunction = !!(hdr & 0x80);



			break;

	}

}



DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);



#endif



#ifdef CONFIG_X86_IO_APIC

static void __init quirk_alder_ioapic(struct pci_dev *pdev)

{

CRA Git | Maintained and supported by SUSTech CRA and CCSE