[libata] Add Samsung PATA controller driver, pata_samsung_cf (155bf48f) · Commits · 戴 / test

drivers/ata/Kconfig

+9 −0

Original line number	Diff line number	Diff line
		@@ -805,6 +805,15 @@ config PATA_RZ1000

		If unsure, say N.

		config PATA_SAMSUNG_CF
		tristate "Samsung SoC PATA support"
		depends on SAMSUNG_DEV_IDE
		help
		This option enables basic support for Samsung's S3C/S5P board
		PATA controllers via the new ATA layer

		If unsure, say N.

		config PATA_WINBOND_VLB
		tristate "Winbond W83759A VLB PATA support (Experimental)"
		depends on ISA && EXPERIMENTAL

drivers/ata/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -88,6 +88,7 @@ obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
		obj-$(CONFIG_PATA_QDI) += pata_qdi.o
		obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
		obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
		obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
		obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o

		# Should be last but two libata driver

drivers/ata/pata_samsung_cf.c

0 → 100644

+683 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2010 Samsung Electronics Co., Ltd.
		* http://www.samsung.com
		*
		* PATA driver for Samsung SoCs.
		* Supports CF Interface in True IDE mode. Currently only PIO mode has been
		* implemented; UDMA support has to be added.
		*
		* Based on:
		* PATA driver for AT91SAM9260 Static Memory Controller
		* PATA driver for Toshiba SCC controller
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License version 2
		* as published by the Free Software Foundation.
		*/

		#include <linux/kernel.h>
		#include <linux/module.h>
		#include <linux/init.h>
		#include <linux/clk.h>
		#include <linux/libata.h>
		#include <linux/platform_device.h>
		#include <linux/slab.h>

		#include <plat/ata.h>
		#include <plat/regs-ata.h>

		#define DRV_NAME "pata_samsung_cf"
		#define DRV_VERSION "0.1"

		enum s3c_cpu_type {
		TYPE_S3C64XX,
		TYPE_S5PC100,
		TYPE_S5PV210,
		};

		/*
		* struct s3c_ide_info - S3C PATA instance.
		* @clk: The clock resource for this controller.
		* @ide_addr: The area mapped for the hardware registers.
		* @sfr_addr: The area mapped for the special function registers.
		* @irq: The IRQ number we are using.
		* @cpu_type: The exact type of this controller.
		* @fifo_status_reg: The ATA_FIFO_STATUS register offset.
		*/
		struct s3c_ide_info {
		struct clk *clk;
		void __iomem *ide_addr;
		void __iomem *sfr_addr;
		unsigned int irq;
		enum s3c_cpu_type cpu_type;
		unsigned int fifo_status_reg;
		};

		static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode)
		{
		u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG);
		reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg \| S3C_ATA_CFG_SWAP);
		writel(reg, s3c_ide_regbase + S3C_ATA_CFG);
		}

		static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase)
		{
		/* Select true-ide as the internal operating mode */
		writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) \| S3C_CFATA_MUX_TRUEIDE,
		s3c_ide_sfrbase + S3C_CFATA_MUX);
		}

		static unsigned long
		pata_s3c_setup_timing(struct s3c_ide_info info, const struct ata_timing ata)
		{
		int t1 = ata->setup;
		int t2 = ata->act8b;
		int t2i = ata->rec8b;
		ulong piotime;

		piotime = ((t2i & 0xff) << 12) \| ((t2 & 0xff) << 4) \| (t1 & 0xf);

		return piotime;
		}

		static void pata_s3c_set_piomode(struct ata_port ap, struct ata_device adev)
		{
		struct s3c_ide_info *info = ap->host->private_data;
		struct ata_timing timing;
		int cycle_time;
		ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG);
		ulong piotime;

		/* Enables IORDY if mode requires it */
		if (ata_pio_need_iordy(adev))
		ata_cfg \|= S3C_ATA_CFG_IORDYEN;
		else
		ata_cfg &= ~S3C_ATA_CFG_IORDYEN;

		cycle_time = (int)(1000000000UL / clk_get_rate(info->clk));

		ata_timing_compute(adev, adev->pio_mode, &timing,
		cycle_time * 1000, 0);

		piotime = pata_s3c_setup_timing(info, &timing);

		writel(ata_cfg, info->ide_addr + S3C_ATA_CFG);
		writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME);
		}

		/*
		* Waits until the IDE controller is able to perform next read/write
		* operation to the disk. Needed for 64XX series boards only.
		*/
		static int wait_for_host_ready(struct s3c_ide_info *info)
		{
		ulong timeout;
		void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg;

		/* wait for maximum of 20 msec */
		timeout = jiffies + msecs_to_jiffies(20);
		while (time_before(jiffies, timeout)) {
		if ((readl(fifo_reg) >> 28) == 0)
		return 0;
		}
		return -EBUSY;
		}

		/*
		* Writes to one of the task file registers.
		*/
		static void ata_outb(struct ata_host host, u8 addr, void __iomem reg)
		{
		struct s3c_ide_info *info = host->private_data;

		wait_for_host_ready(info);
		writeb(addr, reg);
		}

		/*
		* Reads from one of the task file registers.
		*/
		static u8 ata_inb(struct ata_host host, void __iomem reg)
		{
		struct s3c_ide_info *info = host->private_data;
		u8 temp;

		wait_for_host_ready(info);
		(void) readb(reg);
		wait_for_host_ready(info);
		temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA);
		return temp;
		}

		/*
		* pata_s3c_tf_load - send taskfile registers to host controller
		*/
		static void pata_s3c_tf_load(struct ata_port *ap,
		const struct ata_taskfile *tf)
		{
		struct ata_ioports *ioaddr = &ap->ioaddr;
		unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;

		if (tf->ctl != ap->last_ctl) {
		ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
		ap->last_ctl = tf->ctl;
		ata_wait_idle(ap);
		}

		if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
		ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr);
		ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr);
		ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr);
		ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr);
		ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr);
		}

		if (is_addr) {
		ata_outb(ap->host, tf->feature, ioaddr->feature_addr);
		ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr);
		ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr);
		ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr);
		ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr);
		}

		if (tf->flags & ATA_TFLAG_DEVICE)
		ata_outb(ap->host, tf->device, ioaddr->device_addr);

		ata_wait_idle(ap);
		}

		/*
		* pata_s3c_tf_read - input device's ATA taskfile shadow registers
		*/
		static void pata_s3c_tf_read(struct ata_port ap, struct ata_taskfile tf)
		{
		struct ata_ioports *ioaddr = &ap->ioaddr;

		tf->feature = ata_inb(ap->host, ioaddr->error_addr);
		tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr);
		tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr);
		tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr);
		tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr);
		tf->device = ata_inb(ap->host, ioaddr->device_addr);

		if (tf->flags & ATA_TFLAG_LBA48) {
		ata_outb(ap->host, tf->ctl \| ATA_HOB, ioaddr->ctl_addr);
		tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr);
		tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr);
		tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr);
		tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr);
		tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr);
		ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
		ap->last_ctl = tf->ctl;
		}
		}

		/*
		* pata_s3c_exec_command - issue ATA command to host controller
		*/
		static void pata_s3c_exec_command(struct ata_port *ap,
		const struct ata_taskfile *tf)
		{
		ata_outb(ap->host, tf->command, ap->ioaddr.command_addr);
		ata_sff_pause(ap);
		}

		/*
		* pata_s3c_check_status - Read device status register
		*/
		static u8 pata_s3c_check_status(struct ata_port *ap)
		{
		return ata_inb(ap->host, ap->ioaddr.status_addr);
		}

		/*
		* pata_s3c_check_altstatus - Read alternate device status register
		*/
		static u8 pata_s3c_check_altstatus(struct ata_port *ap)
		{
		return ata_inb(ap->host, ap->ioaddr.altstatus_addr);
		}

		/*
		* pata_s3c_data_xfer - Transfer data by PIO
		*/
		unsigned int pata_s3c_data_xfer(struct ata_device dev, unsigned char buf,
		unsigned int buflen, int rw)
		{
		struct ata_port *ap = dev->link->ap;
		struct s3c_ide_info *info = ap->host->private_data;
		void __iomem *data_addr = ap->ioaddr.data_addr;
		unsigned int words = buflen >> 1, i;
		u16 data_ptr = (u16 )buf;

		/* Requires wait same as in ata_inb/ata_outb */
		if (rw == READ)
		for (i = 0; i < words; i++, data_ptr++) {
		wait_for_host_ready(info);
		(void) readw(data_addr);
		wait_for_host_ready(info);
		*data_ptr = readw(info->ide_addr
		+ S3C_ATA_PIO_RDATA);
		}
		else
		for (i = 0; i < words; i++, data_ptr++) {
		wait_for_host_ready(info);
		writew(*data_ptr, data_addr);
		}

		if (buflen & 0x01)
		dev_err(ap->dev, "unexpected trailing data\n");

		return words << 1;
		}

		/*
		* pata_s3c_dev_select - Select device on ATA bus
		*/
		static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device)
		{
		u8 tmp = ATA_DEVICE_OBS;

		if (device != 0)
		tmp \|= ATA_DEV1;

		ata_outb(ap->host, tmp, ap->ioaddr.device_addr);
		ata_sff_pause(ap);
		}

		/*
		* pata_s3c_devchk - PATA device presence detection
		*/
		static unsigned int pata_s3c_devchk(struct ata_port *ap,
		unsigned int device)
		{
		struct ata_ioports *ioaddr = &ap->ioaddr;
		u8 nsect, lbal;

		pata_s3c_dev_select(ap, device);

		ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
		ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);

		ata_outb(ap->host, 0xaa, ioaddr->nsect_addr);
		ata_outb(ap->host, 0x55, ioaddr->lbal_addr);

		ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
		ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);

		nsect = ata_inb(ap->host, ioaddr->nsect_addr);
		lbal = ata_inb(ap->host, ioaddr->lbal_addr);

		if ((nsect == 0x55) && (lbal == 0xaa))
		return 1; /* we found a device */

		return 0; /* nothing found */
		}

		/*
		* pata_s3c_wait_after_reset - wait for devices to become ready after reset
		*/
		static int pata_s3c_wait_after_reset(struct ata_link *link,
		unsigned long deadline)
		{
		int rc;

		msleep(ATA_WAIT_AFTER_RESET);

		/* always check readiness of the master device */
		rc = ata_sff_wait_ready(link, deadline);
		/* -ENODEV means the odd clown forgot the D7 pulldown resistor
		* and TF status is 0xff, bail out on it too.
		*/
		if (rc)
		return rc;

		return 0;
		}

		/*
		* pata_s3c_bus_softreset - PATA device software reset
		*/
		static unsigned int pata_s3c_bus_softreset(struct ata_port *ap,
		unsigned long deadline)
		{
		struct ata_ioports *ioaddr = &ap->ioaddr;

		/* software reset. causes dev0 to be selected */
		ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
		udelay(20);
		ata_outb(ap->host, ap->ctl \| ATA_SRST, ioaddr->ctl_addr);
		udelay(20);
		ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
		ap->last_ctl = ap->ctl;

		return pata_s3c_wait_after_reset(&ap->link, deadline);
		}

		/*
		* pata_s3c_softreset - reset host port via ATA SRST
		*/
		static int pata_s3c_softreset(struct ata_link link, unsigned int classes,
		unsigned long deadline)
		{
		struct ata_port *ap = link->ap;
		unsigned int devmask = 0;
		int rc;
		u8 err;

		/* determine if device 0 is present */
		if (pata_s3c_devchk(ap, 0))
		devmask \|= (1 << 0);

		/* select device 0 again */
		pata_s3c_dev_select(ap, 0);

		/* issue bus reset */
		rc = pata_s3c_bus_softreset(ap, deadline);
		/* if link is occupied, -ENODEV too is an error */
		if (rc && rc != -ENODEV) {
		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
		return rc;
		}

		/* determine by signature whether we have ATA or ATAPI devices */
		classes[0] = ata_sff_dev_classify(&ap->link.device[0],
		devmask & (1 << 0), &err);

		return 0;
		}

		/*
		* pata_s3c_set_devctl - Write device control register
		*/
		static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl)
		{
		ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr);
		}

		static struct scsi_host_template pata_s3c_sht = {
		ATA_PIO_SHT(DRV_NAME),
		};

		static struct ata_port_operations pata_s3c_port_ops = {
		.inherits = &ata_sff_port_ops,
		.sff_check_status = pata_s3c_check_status,
		.sff_check_altstatus = pata_s3c_check_altstatus,
		.sff_tf_load = pata_s3c_tf_load,
		.sff_tf_read = pata_s3c_tf_read,
		.sff_data_xfer = pata_s3c_data_xfer,
		.sff_exec_command = pata_s3c_exec_command,
		.sff_dev_select = pata_s3c_dev_select,
		.sff_set_devctl = pata_s3c_set_devctl,
		.softreset = pata_s3c_softreset,
		.set_piomode = pata_s3c_set_piomode,
		};

		static struct ata_port_operations pata_s5p_port_ops = {
		.inherits = &ata_sff_port_ops,
		.set_piomode = pata_s3c_set_piomode,
		};

		static void pata_s3c_enable(void *s3c_ide_regbase, bool state)
		{
		u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL);
		temp = state ? (temp \| 1) : (temp & ~1);
		writel(temp, s3c_ide_regbase + S3C_ATA_CTRL);
		}

		static irqreturn_t pata_s3c_irq(int irq, void *dev_instance)
		{
		struct ata_host *host = dev_instance;
		struct s3c_ide_info *info = host->private_data;
		u32 reg;

		reg = readl(info->ide_addr + S3C_ATA_IRQ);
		writel(reg, info->ide_addr + S3C_ATA_IRQ);

		return ata_sff_interrupt(irq, dev_instance);
		}

		static void pata_s3c_hwinit(struct s3c_ide_info *info,
		struct s3c_ide_platdata *pdata)
		{
		switch (info->cpu_type) {
		case TYPE_S3C64XX:
		/* Configure as big endian */
		pata_s3c_cfg_mode(info->sfr_addr);
		pata_s3c_set_endian(info->ide_addr, 1);
		pata_s3c_enable(info->ide_addr, true);
		msleep(100);

		/* Remove IRQ Status */
		writel(0x1f, info->ide_addr + S3C_ATA_IRQ);
		writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK);
		break;

		case TYPE_S5PC100:
		pata_s3c_cfg_mode(info->sfr_addr);
		/* FALLTHROUGH */

		case TYPE_S5PV210:
		/* Configure as little endian */
		pata_s3c_set_endian(info->ide_addr, 0);
		pata_s3c_enable(info->ide_addr, true);
		msleep(100);

		/* Remove IRQ Status */
		writel(0x3f, info->ide_addr + S3C_ATA_IRQ);
		writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK);
		break;

		default:
		BUG();
		}
		}

		static int __init pata_s3c_probe(struct platform_device *pdev)
		{
		struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
		struct device *dev = &pdev->dev;
		struct s3c_ide_info *info;
		struct resource *res;
		struct ata_port *ap;
		struct ata_host *host;
		enum s3c_cpu_type cpu_type;
		int ret;

		cpu_type = platform_get_device_id(pdev)->driver_data;

		info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
		if (!info) {
		dev_err(dev, "failed to allocate memory for device data\n");
		return -ENOMEM;
		}

		info->irq = platform_get_irq(pdev, 0);

		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
		if (res == NULL) {
		dev_err(dev, "failed to get mem resource\n");
		return -EINVAL;
		}

		if (!devm_request_mem_region(dev, res->start,
		resource_size(res), DRV_NAME)) {
		dev_err(dev, "error requesting register region\n");
		return -EBUSY;
		}

		info->ide_addr = devm_ioremap(dev, res->start, resource_size(res));
		if (!info->ide_addr) {
		dev_err(dev, "failed to map IO base address\n");
		return -ENOMEM;
		}

		info->clk = clk_get(&pdev->dev, "cfcon");
		if (IS_ERR(info->clk)) {
		dev_err(dev, "failed to get access to cf controller clock\n");
		ret = PTR_ERR(info->clk);
		info->clk = NULL;
		return ret;
		}

		clk_enable(info->clk);

		/* init ata host */
		host = ata_host_alloc(dev, 1);
		if (!host) {
		dev_err(dev, "failed to allocate ide host\n");
		ret = -ENOMEM;
		goto stop_clk;
		}

		ap = host->ports[0];
		ap->flags \|= ATA_FLAG_MMIO;
		ap->pio_mask = ATA_PIO4;

		if (cpu_type == TYPE_S3C64XX) {
		ap->ops = &pata_s3c_port_ops;
		info->sfr_addr = info->ide_addr + 0x1800;
		info->ide_addr += 0x1900;
		info->fifo_status_reg = 0x94;
		} else if (cpu_type == TYPE_S5PC100) {
		ap->ops = &pata_s5p_port_ops;
		info->sfr_addr = info->ide_addr + 0x1800;
		info->ide_addr += 0x1900;
		info->fifo_status_reg = 0x84;
		} else {
		ap->ops = &pata_s5p_port_ops;
		info->fifo_status_reg = 0x84;
		}

		info->cpu_type = cpu_type;

		if (info->irq <= 0) {
		ap->flags \|= ATA_FLAG_PIO_POLLING;
		info->irq = 0;
		ata_port_desc(ap, "no IRQ, using PIO polling\n");
		}

		ap->ioaddr.cmd_addr = info->ide_addr + S3C_ATA_CMD;
		ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR;
		ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED;
		ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED;
		ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR;
		ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR;
		ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR;
		ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR;
		ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR;
		ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD;
		ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD;
		ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD;
		ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD;

		ata_port_desc(ap, "mmio cmd 0x%llx ",
		(unsigned long long)res->start);

		host->private_data = info;

		if (pdata && pdata->setup_gpio)
		pdata->setup_gpio();

		/* Set endianness and enable the interface */
		pata_s3c_hwinit(info, pdata);

		platform_set_drvdata(pdev, host);

		return ata_host_activate(host, info->irq,
		info->irq ? pata_s3c_irq : NULL,
		0, &pata_s3c_sht);

		stop_clk:
		clk_disable(info->clk);
		clk_put(info->clk);
		return ret;
		}

		static int __exit pata_s3c_remove(struct platform_device *pdev)
		{
		struct ata_host *host = platform_get_drvdata(pdev);
		struct s3c_ide_info *info = host->private_data;

		ata_host_detach(host);

		clk_disable(info->clk);
		clk_put(info->clk);

		return 0;
		}

		#ifdef CONFIG_PM
		static int pata_s3c_suspend(struct device *dev)
		{
		struct platform_device *pdev = to_platform_device(dev);
		struct ata_host *host = platform_get_drvdata(pdev);

		return ata_host_suspend(host, PMSG_SUSPEND);
		}

		static int pata_s3c_resume(struct device *dev)
		{
		struct platform_device *pdev = to_platform_device(dev);
		struct ata_host *host = platform_get_drvdata(pdev);
		struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
		struct s3c_ide_info *info = host->private_data;

		pata_s3c_hwinit(info, pdata);
		ata_host_resume(host);

		return 0;
		}

		static const struct dev_pm_ops pata_s3c_pm_ops = {
		.suspend = pata_s3c_suspend,
		.resume = pata_s3c_resume,
		};
		#endif

		/* driver device registration */
		static struct platform_device_id pata_s3c_driver_ids[] = {
		{
		.name = "s3c64xx-pata",
		.driver_data = TYPE_S3C64XX,
		}, {
		.name = "s5pc100-pata",
		.driver_data = TYPE_S5PC100,
		}, {
		.name = "s5pv210-pata",
		.driver_data = TYPE_S5PV210,
		},
		{ }
		};

		MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids);

		static struct platform_driver pata_s3c_driver = {
		.remove = __exit_p(pata_s3c_remove),
		.id_table = pata_s3c_driver_ids,
		.driver = {
		.name = DRV_NAME,
		.owner = THIS_MODULE,
		#ifdef CONFIG_PM
		.pm = &pata_s3c_pm_ops,
		#endif
		},
		};

		static int __init pata_s3c_init(void)
		{
		return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe);
		}

		static void __exit pata_s3c_exit(void)
		{
		platform_driver_unregister(&pata_s3c_driver);
		}

		module_init(pata_s3c_init);
		module_exit(pata_s3c_exit);

		MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
		MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");
		MODULE_LICENSE("GPL");
		MODULE_VERSION(DRV_VERSION);

Admin message