ARM: dts: nuvoton: Add Fii Kudo system (14579c76) · Commits · 戴 / test

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -340,6 +340,7 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \
		lpc3250-phy3250.dtb
		dtb-$(CONFIG_ARCH_NPCM7XX) += \
		nuvoton-npcm730-gsj.dtb \
		nuvoton-npcm730-kudo.dtb \
		nuvoton-npcm750-evb.dtb \
		nuvoton-npcm750-runbmc-olympus.dtb
		dtb-$(CONFIG_MACH_MESON6) += \

arch/arm/boot/dts/nuvoton-npcm730-kudo.dts

0 → 100644

+826 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (c) 2020 Fii USA Inc.

		/dts-v1/;
		#include "nuvoton-npcm730.dtsi"

		#include <dt-bindings/gpio/gpio.h>

		/ {
		model = "Fii Kudo Board";
		compatible = "fii,kudo", "nuvoton,npcm730";

		aliases {
		ethernet1 = &gmac0;
		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		i2c4 = &i2c4;
		i2c5 = &i2c5;
		i2c6 = &i2c6;
		i2c7 = &i2c7;
		i2c8 = &i2c8;
		i2c9 = &i2c9;
		i2c10 = &i2c10;
		i2c11 = &i2c11;
		i2c12 = &i2c12;
		i2c13 = &i2c13;
		i2c14 = &i2c14;
		i2c15 = &i2c15;
		spi0 = &spi0;
		spi1 = &spi1;
		fiu0 = &fiu0;
		fiu1 = &fiu3;
		};

		chosen {
		stdout-path = &serial3;
		};

		memory {
		reg = <0 0x40000000>;
		};

		iio-hwmon {
		compatible = "iio-hwmon";
		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
		};

		jtag_master {
		compatible = "nuvoton,npcm750-jtag-master";
		#address-cells = <1>;
		#size-cells = <1>;

		// dev/jtag0
		dev-num = <0>;
		// pspi or gpio
		mode = "pspi";

		// pspi2
		pspi-controller = <2>;
		reg = <0xf0201000 0x1000>;
		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clk NPCM7XX_CLK_APB5>;

		// TCK, TDI, TDO, TMS
		jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>,
		<&gpio0 18 GPIO_ACTIVE_HIGH>,
		<&gpio0 17 GPIO_ACTIVE_HIGH>,
		<&gpio0 16 GPIO_ACTIVE_HIGH>;
		};

		leds {
		compatible = "gpio-leds";
		heartbeat {
		label = "heartbeat";
		gpios = <&gpio0 14 1>;
		};
		};

		pinctrl: pinctrl@f0800000 {
		gpio61oh_pins: gpio61oh-pins {
		pins = "GPO61/nDTR1_BOUT1/STRAP6";
		bias-disable;
		output-high;
		};
		gpio62oh_pins: gpio62oh-pins {
		pins = "GPO62/nRTST1/STRAP5";
		bias-disable;
		output-high;
		};
		gpio161ol_pins: gpio161ol-pins {
		pins = "GPIO161/nLFRAME/nESPICS";
		bias-disable;
		output-low;
		};
		gpio163i_pins: gpio163i-pins {
		pins = "GPIO163/LCLK/ESPICLK";
		bias-disable;
		input-enable;
		};
		gpio167ol_pins: gpio167ol-pins {
		pins = "GPIO167/LAD3/ESPI_IO3";
		bias-disable;
		output-low;
		};
		gpio95i_pins: gpio95i-pins {
		pins = "GPIO95/nLRESET/nESPIRST";
		bias-disable;
		input-enable;
		};
		gpio65ol_pins: gpio65ol-pins {
		pins = "GPIO65/FANIN1";
		bias-disable;
		output-low;
		};
		gpio66oh_pins: gpio66oh-pins {
		pins = "GPIO66/FANIN2";
		bias-disable;
		output-high;
		};
		gpio67oh_pins: gpio67oh-pins {
		pins = "GPIO67/FANIN3";
		bias-disable;
		output-high;
		};
		gpio68ol_pins: gpio68ol-pins {
		pins = "GPIO68/FANIN4";
		bias-disable;
		output-low;
		};
		gpio69i_pins: gpio69i-pins {
		pins = "GPIO69/FANIN5";
		bias-disable;
		input-enable;
		};
		gpio70ol_pins: gpio70ol-pins {
		pins = "GPIO70/FANIN6";
		bias-disable;
		output-low;
		};
		gpio71i_pins: gpio71i-pins {
		pins = "GPIO71/FANIN7";
		bias-disable;
		input-enable;
		};
		gpio72i_pins: gpio72i-pins {
		pins = "GPIO72/FANIN8";
		bias-disable;
		input-enable;
		};
		gpio73i_pins: gpio73i-pins {
		pins = "GPIO73/FANIN9";
		bias-disable;
		input-enable;
		};
		gpio74i_pins: gpio74i-pins {
		pins = "GPIO74/FANIN10";
		bias-disable;
		input-enable;
		};
		gpio75i_pins: gpio75i-pins {
		pins = "GPIO75/FANIN11";
		bias-disable;
		input-enable;
		};
		gpio76i_pins: gpio76i-pins {
		pins = "GPIO76/FANIN12";
		bias-disable;
		input-enable;
		};
		gpio77i_pins: gpio77i-pins {
		pins = "GPIO77/FANIN13";
		bias-disable;
		input-enable;
		};
		gpio78i_pins: gpio78i-pins {
		pins = "GPIO78/FANIN14";
		bias-disable;
		input-enable;
		};
		gpio79ol_pins: gpio79ol-pins {
		pins = "GPIO79/FANIN15";
		bias-disable;
		output-low;
		};
		gpio80oh_pins: gpio80oh-pins {
		pins = "GPIO80/PWM0";
		bias-disable;
		output-high;
		};
		gpio81i_pins: gpio81i-pins {
		pins = "GPIO81/PWM1";
		bias-disable;
		input-enable;
		};
		gpio82i_pins: gpio82i-pins {
		pins = "GPIO82/PWM2";
		bias-disable;
		input-enable;
		};
		gpio83i_pins: gpio83i-pins {
		pins = "GPIO83/PWM3";
		bias-disable;
		input-enable;
		};
		gpio144i_pins: gpio144i-pins {
		pins = "GPIO144/PWM4";
		bias-disable;
		input-enable;
		};
		gpio145i_pins: gpio145i-pins {
		pins = "GPIO145/PWM5";
		bias-disable;
		input-enable;
		};
		gpio146i_pins: gpio146i-pins {
		pins = "GPIO146/PWM6";
		bias-disable;
		input-enable;
		};
		gpio147oh_pins: gpio147oh-pins {
		pins = "GPIO147/PWM7";
		bias-disable;
		output-high;
		};
		gpio168ol_pins: gpio168ol-pins {
		pins = "GPIO168/nCLKRUN/nESPIALERT";
		bias-disable;
		output-low;
		};
		gpio169oh_pins: gpio169oh-pins {
		pins = "GPIO169/nSCIPME";
		bias-disable;
		output-high;
		};
		gpio170ol_pins: gpio170ol-pins {
		pins = "GPIO170/nSMI";
		bias-disable;
		output-low;
		};
		gpio218oh_pins: gpio218oh-pins {
		pins = "GPIO218/nWDO1";
		bias-disable;
		output-high;
		};
		gpio37i_pins: gpio37i-pins {
		pins = "GPIO37/SMB3CSDA";
		bias-disable;
		input-enable;
		};
		gpio38i_pins: gpio38i-pins {
		pins = "GPIO38/SMB3CSCL";
		bias-disable;
		input-enable;
		};
		gpio39i_pins: gpio39i-pins {
		pins = "GPIO39/SMB3BSDA";
		bias-disable;
		input-enable;
		};
		gpio40i_pins: gpio40i-pins {
		pins = "GPIO40/SMB3BSCL";
		bias-disable;
		input-enable;
		};
		gpio121i_pins: gpio121i-pins {
		pins = "GPIO121/SMB2CSCL";
		bias-disable;
		input-enable;
		};
		gpio122i_pins: gpio122i-pins {
		pins = "GPIO122/SMB2BSDA";
		bias-disable;
		input-enable;
		};
		gpio123i_pins: gpio123i-pins {
		pins = "GPIO123/SMB2BSCL";
		bias-disable;
		input-enable;
		};
		gpio124i_pins: gpio124i-pins {
		pins = "GPIO124/SMB1CSDA";
		bias-disable;
		input-enable;
		};
		gpio125i_pins: gpio125i-pins {
		pins = "GPIO125/SMB1CSCL";
		bias-disable;
		input-enable;
		};
		gpio126i_pins: gpio126i-pins {
		pins = "GPIO126/SMB1BSDA";
		bias-disable;
		input-enable;
		};
		gpio127i_pins: gpio127i-pins {
		pins = "GPIO127/SMB1BSCL";
		bias-disable;
		input-enable;
		};
		gpio136i_pins: gpio136i-pins {
		pins = "GPIO136/SD1DT0";
		bias-disable;
		input-enable;
		};
		gpio137oh_pins: gpio137oh-pins {
		pins = "GPIO137/SD1DT1";
		bias-disable;
		output-high;
		};
		gpio138i_pins: gpio138i-pins {
		pins = "GPIO138/SD1DT2";
		bias-disable;
		input-enable;
		};
		gpio139i_pins: gpio139i-pins {
		pins = "GPIO139/SD1DT3";
		bias-disable;
		input-enable;
		};
		gpio140i_pins: gpio140i-pins {
		pins = "GPIO140/SD1CLK";
		bias-disable;
		input-enable;
		};
		gpio141i_pins: gpio141i-pins {
		pins = "GPIO141/SD1WP";
		bias-disable;
		input-enable;
		};
		gpio190oh_pins: gpio190oh-pins {
		pins = "GPIO190/nPRD_SMI";
		bias-disable;
		output-high;
		};
		gpio191oh_pins: gpio191oh-pins {
		pins = "GPIO191";
		bias-disable;
		output-high;
		};
		gpio195ol_pins: gpio195ol-pins {
		pins = "GPIO195/SMB0BSDA";
		bias-disable;
		output-low;
		};
		gpio196ol_pins: gpio196ol-pins {
		pins = "GPIO196/SMB0CSCL";
		bias-disable;
		output-low;
		};
		gpio199i_pins: gpio199i-pins {
		pins = "GPIO199/SMB0DSCL";
		bias-disable;
		input-enable;
		};
		gpio202ol_pins: gpio202ol-pins {
		pins = "GPIO202/SMB0CSDA";
		bias-disable;
		output-low;
		};
		};
		};

		&gmac0 {
		phy-mode = "rgmii-id";
		snps,eee-force-disable;
		status = "okay";
		};

		&ehci1 {
		status = "okay";
		};

		&fiu0 {
		pinctrl-names = "default";
		pinctrl-0 = <&spi0cs1_pins>;
		status = "okay";
		spi-nor@0 {
		compatible = "jedec,spi-nor";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;
		spi-max-frequency = <5000000>;
		spi-rx-bus-width = <2>;
		label = "bmc";
		partitions@80000000 {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;
		u-boot@0 {
		label = "u-boot";
		reg = <0x0000000 0xC0000>;
		read-only;
		};
		u-boot-env@100000{
		label = "u-boot-env";
		reg = <0x00100000 0x40000>;
		};
		kernel@200000 {
		label = "kernel";
		reg = <0x0200000 0x600000>;
		};
		rofs@800000 {
		label = "rofs";
		reg = <0x800000 0x3500000>;
		};
		rwfs@3d00000 {
		label = "rwfs";
		reg = <0x3d00000 0x300000>;
		};
		};
		};
		spi-nor@1 {
		compatible = "jedec,spi-nor";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <1>;
		spi-max-frequency = <5000000>;
		spi-rx-bus-width = <2>;
		partitions@88000000 {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;
		spare1@0 {
		label = "spi0-cs1-spare1";
		reg = <0x0 0x800000>;
		};
		spare2@800000 {
		label = "spi0-cs1-spare2";
		reg = <0x800000 0x0>;
		};
		};
		};
		};

		&fiu3 {
		pinctrl-0 = <&spi3_pins>;
		spi-nor@0 {
		compatible = "jedec,spi-nor";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;
		spi-max-frequency = <5000000>;
		spi-rx-bus-width = <2>;
		partitions@A0000000 {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;
		system1@0 {
		label = "bios";
		reg = <0x0 0x0>;
		};
		system2@800000 {
		label = "spi3-system2";
		reg = <0x800000 0x0>;
		};
		};
		};
		};

		&watchdog1 {
		status = "okay";
		};

		&rng {
		status = "okay";
		};

		&serial0 {
		status = "okay";
		};

		&serial1 {
		status = "okay";
		};

		&serial2 {
		status = "okay";
		};

		&serial3 {
		status = "okay";
		};

		&adc {
		#io-channel-cells = <1>;
		status = "okay";
		};

		&i2c1 {
		status = "okay";
		i2c-switch@75 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x75>;
		i2c-mux-idle-disconnect;

		i2c@2 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <2>;

		// Rear-Fan
		max31790@58 {
		compatible = "maxim,max31790";
		reg = <0x58>;
		};
		};

		i2c@3 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <3>;

		// Mid-Fan
		max31790@58 {
		compatible = "maxim,max31790";
		reg = <0x58>;
		};
		};

		i2c-bus@4 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <4>;

		// INLET1_T
		lm75@5c {
		compatible = "ti,lm75";
		reg = <0x5c>;
		};
		};

		i2c-bus@5 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <5>;

		// OUTLET1_T
		lm75@5c {
		compatible = "ti,lm75";
		reg = <0x5c>;
		};
		};

		i2c-bus@6 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <6>;

		// OUTLET2_T
		lm75@5c {
		compatible = "ti,lm75";
		reg = <0x5c>;
		};
		};

		i2c-bus@7 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <7>;

		// OUTLET3_T
		lm75@5c {
		compatible = "ti,lm75";
		reg = <0x5c>;
		};
		};
		};
		i2c-switch@77 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x77>;
		i2c-mux-idle-disconnect;

		i2c-bus@2 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <2>;

		// STB-T
		pmbus@74 {
		compatible = "pmbus";
		reg = <0x74>;
		};
		};
		};
		};

		&i2c2 {
		status = "okay";
		smpro@4f {
		compatible = "ampere,smpro";
		reg = <0x4f>;
		};

		smpro@4e {
		compatible = "ampere,smpro";
		reg = <0x4e>;
		};
		};

		&i2c3 {
		status = "okay";
		};

		&i2c4 {
		status = "okay";
		i2c-switch@77 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x77>;
		i2c-mux-idle-disconnect;

		i2c-bus@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0>;

		// ADC sensors
		adm1266@40 {
		compatible = "adi,adm1266";
		reg = <0x40>;
		};
		};

		i2c-bus@1 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <1>;

		// ADC sensors
		adm1266@41 {
		compatible = "adi,adm1266";
		reg = <0x41>;
		};
		};
		};
		};

		&i2c5 {
		status = "okay";
		};

		&i2c6 {
		status = "okay";
		};

		&i2c7 {
		status = "okay";
		};

		&i2c8 {
		status = "okay";
		};

		&i2c9 {
		status = "okay";
		};

		&i2c10 {
		status = "okay";
		};

		&i2c11 {
		status = "okay";
		};

		&i2c12 {
		status = "okay";
		ssif-bmc@10 {
		compatible = "ssif-bmc";
		reg = <0x10>;
		};
		};

		&i2c13 {
		status = "okay";
		i2c-switch@77 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x77>;
		i2c-mux-idle-disconnect;

		i2c-bus@3 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <3>;

		// M2_ZONE_T
		lm75@28 {
		compatible = "ti,lm75";
		reg = <0x28>;
		};
		};

		i2c-bus@4 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <4>;

		// BATT_ZONE_T
		lm75@29 {
		compatible = "ti,lm75";
		reg = <0x29>;
		};
		};

		i2c-bus@5 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <5>;

		// NBM1_ZONE_T
		lm75@28 {
		compatible = "ti,lm75";
		reg = <0x28>;
		};
		};
		i2c-bus@6 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <6>;

		// NBM2_ZONE_T
		lm75@29 {
		compatible = "ti,lm75";
		reg = <0x29>;
		};
		};
		};
		};

		&i2c14 {
		status = "okay";
		};

		&i2c15 {
		status = "okay";
		};

		&spi0 {
		cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
		status = "okay";
		};

		&pinctrl {
		pinctrl-names = "default";
		pinctrl-0 = <
		&gpio61oh_pins
		&gpio62oh_pins
		&gpio161ol_pins
		&gpio163i_pins
		&gpio167ol_pins
		&gpio95i_pins
		&gpio65ol_pins
		&gpio66oh_pins
		&gpio67oh_pins
		&gpio68ol_pins
		&gpio69i_pins
		&gpio70ol_pins
		&gpio71i_pins
		&gpio72i_pins
		&gpio73i_pins
		&gpio74i_pins
		&gpio75i_pins
		&gpio76i_pins
		&gpio77i_pins
		&gpio78i_pins
		&gpio79ol_pins
		&gpio80oh_pins
		&gpio81i_pins
		&gpio82i_pins
		&gpio83i_pins
		&gpio144i_pins
		&gpio145i_pins
		&gpio146i_pins
		&gpio147oh_pins
		&gpio168ol_pins
		&gpio169oh_pins
		&gpio170ol_pins
		&gpio218oh_pins
		&gpio37i_pins
		&gpio38i_pins
		&gpio39i_pins
		&gpio40i_pins
		&gpio121i_pins
		&gpio122i_pins
		&gpio123i_pins
		&gpio124i_pins
		&gpio125i_pins
		&gpio126i_pins
		&gpio127i_pins
		&gpio136i_pins
		&gpio137oh_pins
		&gpio138i_pins
		&gpio139i_pins
		&gpio140i_pins
		&gpio141i_pins
		&gpio190oh_pins
		&gpio191oh_pins
		&gpio195ol_pins
		&gpio196ol_pins
		&gpio199i_pins
		&gpio202ol_pins
		>;
		};

		&gcr {
		serial_port_mux: mux-controller {
		compatible = "mmio-mux";
		#mux-control-cells = <1>;

		mux-reg-masks = <0x38 0x07>;
		idle-states = <2>;
		};
		};

Admin message