Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

5.1 force_empty

  memory.force_empty interface is provided to make cgroup's memory usage empty.

  You can use this interface only when the cgroup has no tasks.

  When writing anything to this

  # echo 0 > memory.force_empty

  Almost all pages tracked by this memory cgroup will be unmapped and freed.

  Some pages cannot be freed because they are locked or in-use. Such pages are

  moved to parent (if use_hierarchy==1) or root (if use_hierarchy==0) and this

  cgroup will be empty.

  the cgroup will be reclaimed and as many pages reclaimed as possible.

  The typical use case for this interface is before calling rmdir().

  Because rmdir() moves all pages to parent, some out-of-use page caches can be

Cgroup unified hierarchy

April, 2014		Tejun Heo <tj@kernel.org>

This document describes the changes made by unified hierarchy and

their rationales.  It will eventually be merged into the main cgroup

documentation.

CONTENTS

1. Background

2. Basic Operation

  2-1. Mounting

  2-2. cgroup.subtree_control

  2-3. cgroup.controllers

3. Structural Constraints

  3-1. Top-down

  3-2. No internal tasks

4. Other Changes

  4-1. [Un]populated Notification

  4-2. Other Core Changes

  4-3. Per-Controller Changes

    4-3-1. blkio

    4-3-2. cpuset

    4-3-3. memory

5. Planned Changes

  5-1. CAP for resource control

1. Background

cgroup allows an arbitrary number of hierarchies and each hierarchy

can host any number of controllers.  While this seems to provide a

high level of flexibility, it isn't quite useful in practice.

For example, as there is only one instance of each controller, utility

type controllers such as freezer which can be useful in all

hierarchies can only be used in one.  The issue is exacerbated by the

fact that controllers can't be moved around once hierarchies are

populated.  Another issue is that all controllers bound to a hierarchy

are forced to have exactly the same view of the hierarchy.  It isn't

possible to vary the granularity depending on the specific controller.

In practice, these issues heavily limit which controllers can be put

on the same hierarchy and most configurations resort to putting each

controller on its own hierarchy.  Only closely related ones, such as

the cpu and cpuacct controllers, make sense to put on the same

hierarchy.  This often means that userland ends up managing multiple

similar hierarchies repeating the same steps on each hierarchy

whenever a hierarchy management operation is necessary.

Unfortunately, support for multiple hierarchies comes at a steep cost.

Internal implementation in cgroup core proper is dazzlingly

complicated but more importantly the support for multiple hierarchies

restricts how cgroup is used in general and what controllers can do.

There's no limit on how many hierarchies there may be, which means

that a task's cgroup membership can't be described in finite length.

The key may contain any varying number of entries and is unlimited in

length, which makes it highly awkward to handle and leads to addition

of controllers which exist only to identify membership, which in turn

exacerbates the original problem.

Also, as a controller can't have any expectation regarding what shape

of hierarchies other controllers would be on, each controller has to

assume that all other controllers are operating on completely

orthogonal hierarchies.  This makes it impossible, or at least very

cumbersome, for controllers to cooperate with each other.

In most use cases, putting controllers on hierarchies which are

completely orthogonal to each other isn't necessary.  What usually is

called for is the ability to have differing levels of granularity

depending on the specific controller.  In other words, hierarchy may

be collapsed from leaf towards root when viewed from specific

controllers.  For example, a given configuration might not care about

how memory is distributed beyond a certain level while still wanting

to control how CPU cycles are distributed.

Unified hierarchy is the next version of cgroup interface.  It aims to

address the aforementioned issues by having more structure while

retaining enough flexibility for most use cases.  Various other

general and controller-specific interface issues are also addressed in

the process.

2. Basic Operation

2-1. Mounting

Currently, unified hierarchy can be mounted with the following mount

command.  Note that this is still under development and scheduled to

change soon.

 mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT

All controllers which are not bound to other hierarchies are

automatically bound to unified hierarchy and show up at the root of

it.  Controllers which are enabled only in the root of unified

hierarchy can be bound to other hierarchies at any time.  This allows

mixing unified hierarchy with the traditional multiple hierarchies in

a fully backward compatible way.

2-2. cgroup.subtree_control

All cgroups on unified hierarchy have a "cgroup.subtree_control" file

which governs which controllers are enabled on the children of the

cgroup.  Let's assume a hierarchy like the following.

  root - A - B - C

               \ D

root's "cgroup.subtree_control" file determines which controllers are

enabled on A.  A's on B.  B's on C and D.  This coincides with the

fact that controllers on the immediate sub-level are used to

distribute the resources of the parent.  In fact, it's natural to

assume that resource control knobs of a child belong to its parent.

Enabling a controller in a "cgroup.subtree_control" file declares that

distribution of the respective resources of the cgroup will be

controlled.  Note that this means that controller enable states are

shared among siblings.

When read, the file contains a space-separated list of currently

enabled controllers.  A write to the file should contain a

space-separated list of controllers with '+' or '-' prefixed (without

the quotes).  Controllers prefixed with '+' are enabled and '-'

disabled.  If a controller is listed multiple times, the last entry

wins.  The specific operations are executed atomically - either all

succeed or fail.

2-3. cgroup.controllers

Read-only "cgroup.controllers" file contains a space-separated list of

controllers which can be enabled in the cgroup's

"cgroup.subtree_control" file.

In the root cgroup, this lists controllers which are not bound to

other hierarchies and the content changes as controllers are bound to

and unbound from other hierarchies.

In non-root cgroups, the content of this file equals that of the

parent's "cgroup.subtree_control" file as only controllers enabled

from the parent can be used in its children.

3. Structural Constraints

3-1. Top-down

As it doesn't make sense to nest control of an uncontrolled resource,

all non-root "cgroup.subtree_control" files can only contain

controllers which are enabled in the parent's "cgroup.subtree_control"

file.  A controller can be enabled only if the parent has the

controller enabled and a controller can't be disabled if one or more

children have it enabled.

3-2. No internal tasks

One long-standing issue that cgroup faces is the competition between

tasks belonging to the parent cgroup and its children cgroups.  This

is inherently nasty as two different types of entities compete and

there is no agreed-upon obvious way to handle it.  Different

controllers are doing different things.

The cpu controller considers tasks and cgroups as equivalents and maps

nice levels to cgroup weights.  This works for some cases but falls

flat when children should be allocated specific ratios of CPU cycles

and the number of internal tasks fluctuates - the ratios constantly

change as the number of competing entities fluctuates.  There also are

other issues.  The mapping from nice level to weight isn't obvious or

universal, and there are various other knobs which simply aren't

available for tasks.

The blkio controller implicitly creates a hidden leaf node for each

cgroup to host the tasks.  The hidden leaf has its own copies of all

the knobs with "leaf_" prefixed.  While this allows equivalent control

over internal tasks, it's with serious drawbacks.  It always adds an

extra layer of nesting which may not be necessary, makes the interface

messy and significantly complicates the implementation.

The memory controller currently doesn't have a way to control what

happens between internal tasks and child cgroups and the behavior is

not clearly defined.  There have been attempts to add ad-hoc behaviors

and knobs to tailor the behavior to specific workloads.  Continuing

this direction will lead to problems which will be extremely difficult

to resolve in the long term.

Multiple controllers struggle with internal tasks and came up with

different ways to deal with it; unfortunately, all the approaches in

use now are severely flawed and, furthermore, the widely different

behaviors make cgroup as whole highly inconsistent.

It is clear that this is something which needs to be addressed from

cgroup core proper in a uniform way so that controllers don't need to

worry about it and cgroup as a whole shows a consistent and logical

behavior.  To achieve that, unified hierarchy enforces the following

structural constraint:

 Except for the root, only cgroups which don't contain any task may

 have controllers enabled in their "cgroup.subtree_control" files.

Combined with other properties, this guarantees that, when a

controller is looking at the part of the hierarchy which has it

enabled, tasks are always only on the leaves.  This rules out

situations where child cgroups compete against internal tasks of the

parent.

There are two things to note.  Firstly, the root cgroup is exempt from

the restriction.  Root contains tasks and anonymous resource

consumption which can't be associated with any other cgroup and

requires special treatment from most controllers.  How resource

consumption in the root cgroup is governed is up to each controller.

Secondly, the restriction doesn't take effect if there is no enabled

controller in the cgroup's "cgroup.subtree_control" file.  This is

important as otherwise it wouldn't be possible to create children of a

populated cgroup.  To control resource distribution of a cgroup, the

cgroup must create children and transfer all its tasks to the children

before enabling controllers in its "cgroup.subtree_control" file.

4. Other Changes

4-1. [Un]populated Notification

cgroup users often need a way to determine when a cgroup's

subhierarchy becomes empty so that it can be cleaned up.  cgroup

currently provides release_agent for it; unfortunately, this mechanism

is riddled with issues.

- It delivers events by forking and execing a userland binary

  specified as the release_agent.  This is a long deprecated method of

  notification delivery.  It's extremely heavy, slow and cumbersome to

  integrate with larger infrastructure.

- There is single monitoring point at the root.  There's no way to

  delegate management of a subtree.

- The event isn't recursive.  It triggers when a cgroup doesn't have

  any tasks or child cgroups.  Events for internal nodes trigger only

  after all children are removed.  This again makes it impossible to

  delegate management of a subtree.

- Events are filtered from the kernel side.  A "notify_on_release"

  file is used to subscribe to or suppress release events.  This is

  unnecessarily complicated and probably done this way because event

  delivery itself was expensive.

Unified hierarchy implements an interface file "cgroup.populated"

which can be used to monitor whether the cgroup's subhierarchy has

tasks in it or not.  Its value is 0 if there is no task in the cgroup

and its descendants; otherwise, 1.  poll and [id]notify events are

triggered when the value changes.

This is significantly lighter and simpler and trivially allows

delegating management of subhierarchy - subhierarchy monitoring can

block further propagation simply by putting itself or another process

in the subhierarchy and monitor events that it's interested in from

there without interfering with monitoring higher in the tree.

In unified hierarchy, the release_agent mechanism is no longer

supported and the interface files "release_agent" and

"notify_on_release" do not exist.

4-2. Other Core Changes

- None of the mount options is allowed.

- remount is disallowed.

- rename(2) is disallowed.

- The "tasks" file is removed.  Everything should at process

  granularity.  Use the "cgroup.procs" file instead.

- The "cgroup.procs" file is not sorted.  pids will be unique unless

  they got recycled in-between reads.

- The "cgroup.clone_children" file is removed.

4-3. Per-Controller Changes

4-3-1. blkio

- blk-throttle becomes properly hierarchical.

4-3-2. cpuset

- Tasks are kept in empty cpusets after hotplug and take on the masks

  of the nearest non-empty ancestor, instead of being moved to it.

- A task can be moved into an empty cpuset, and again it takes on the

  masks of the nearest non-empty ancestor.

4-3-3. memory

- use_hierarchy is on by default and the cgroup file for the flag is

  not created.

5. Planned Changes

5-1. CAP for resource control

Unified hierarchy will require one of the capabilities(7), which is

yet to be decided, for all resource control related knobs.  Process

organization operations - creation of sub-cgroups and migration of

processes in sub-hierarchies may be delegated by changing the

ownership and/or permissions on the cgroup directory and

"cgroup.procs" interface file; however, all operations which affect

resource control - writes to a "cgroup.subtree_control" file or any

controller-specific knobs - will require an explicit CAP privilege.

This, in part, is to prevent the cgroup interface from being

inadvertently promoted to programmable API used by non-privileged

binaries.  cgroup exposes various aspects of the system in ways which

aren't properly abstracted for direct consumption by regular programs.

This is an administration interface much closer to sysctl knobs than

system calls.  Even the basic access model, being filesystem path

based, isn't suitable for direct consumption.  There's no way to

access "my cgroup" in a race-free way or make multiple operations

atomic against migration to another cgroup.

Another aspect is that, for better or for worse, the cgroup interface

goes through far less scrutiny than regular interfaces for

unprivileged userland.  The upside is that cgroup is able to expose

useful features which may not be suitable for general consumption in a

reasonable time frame.  It provides a relatively short path between

internal details and userland-visible interface.  Of course, this

shortcut comes with high risk.  We go through what we go through for

general kernel APIs for good reasons.  It may end up leaking internal

details in a way which can exert significant pain by locking the

kernel into a contract that can't be maintained in a reasonable

manner.

Also, due to the specific nature, cgroup and its controllers don't

tend to attract attention from a wide scope of developers.  cgroup's

short history is already fraught with severely mis-designed

interfaces, unnecessary commitments to and exposing of internal

details, broken and dangerous implementations of various features.

Keeping cgroup as an administration interface is both advantageous for

its role and imperative given its nature.  Some of the cgroup features

may make sense for unprivileged access.  If deemed justified, those

must be further abstracted and implemented as a different interface,

be it a system call or process-private filesystem, and survive through

the scrutiny that any interface for general consumption is required to

go through.

Requiring CAP is not a complete solution but should serve as a

significant deterrent against spraying cgroup usages in non-privileged

programs.

S:	Maintained

F:	drivers/connector/

CONTROL GROUPS (CGROUPS)

CONTROL GROUP (CGROUP)

M:	Tejun Heo <tj@kernel.org>

M:	Li Zefan <lizefan@huawei.com>

L:	containers@lists.linux-foundation.org

L:	cgroups@vger.kernel.org

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git

S:	Maintained

F:	Documentation/cgroups/

F:	include/linux/cgroup*

F:	kernel/cgroup*

F:	mm/*cgroup*

CONTROL GROUP - CPUSET

M:	Li Zefan <lizefan@huawei.com>

L:	cgroups@vger.kernel.org

W:	http://www.bullopensource.org/cpuset/

W:	http://oss.sgi.com/projects/cpusets/

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git

S:	Maintained

F:	Documentation/cgroups/cpusets.txt

F:	include/linux/cpuset.h

F:	kernel/cpuset.c

CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)

M:	Johannes Weiner <hannes@cmpxchg.org>

M:	Michal Hocko <mhocko@suse.cz>

L:	cgroups@vger.kernel.org

L:	linux-mm@kvack.org

S:	Maintained

F:	mm/memcontrol.c

F:	mm/page_cgroup.c

CORETEMP HARDWARE MONITORING DRIVER

M:	Fenghua Yu <fenghua.yu@intel.com>

S:	Maintained

F:	tools/power/cpupower/

CPUSETS

M:	Li Zefan <lizefan@huawei.com>

L:	cgroups@vger.kernel.org

W:	http://www.bullopensource.org/cpuset/

W:	http://oss.sgi.com/projects/cpusets/

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git

S:	Maintained

F:	Documentation/cgroups/cpusets.txt

F:	include/linux/cpuset.h

F:	kernel/cpuset.c

CRAMFS FILESYSTEM

W:	http://sourceforge.net/projects/cramfs/

S:	Orphan / Obsolete

F:	include/linux/vmalloc.h

F:	mm/

MEMORY RESOURCE CONTROLLER

M:	Johannes Weiner <hannes@cmpxchg.org>

M:	Michal Hocko <mhocko@suse.cz>

M:	Balbir Singh <bsingharora@gmail.com>

M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

L:	cgroups@vger.kernel.org

L:	linux-mm@kvack.org

S:	Maintained

F:	mm/memcontrol.c

F:	mm/page_cgroup.c

MEMORY TECHNOLOGY DEVICES (MTD)

M:	David Woodhouse <dwmw2@infradead.org>

M:	Brian Norris <computersforpeace@gmail.com>

	/* associate blkcg if exists */

	rcu_read_lock();

	css = task_css(current, blkio_cgrp_id);

	if (css && css_tryget(css))

	if (css && css_tryget_online(css))

		bio->bi_css = css;

	rcu_read_unlock();

	lockdep_assert_held(q->queue_lock);

	/* blkg holds a reference to blkcg */

	if (!css_tryget(&blkcg->css)) {

	if (!css_tryget_online(&blkcg->css)) {

		ret = -EINVAL;

		goto err_free_blkg;

	}