Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码，可以自行至设置中更改；如有其他问题，请发邮件至 service@cra.moe 寻求协助。

Commit 140647f8 authored Oct 21, 2019 by Amit Kucheria Committed by Andy Gross Oct 27, 2019

ARM: dts: msm8974: thermal: Add thermal zones for each sensor



msm8974 has 11 sensors connected to a single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>

parent d6f0ce84

arch/arm/boot/dts/qcom-msm8974.dtsi

+90 −0

Original line number	Diff line number	Diff line
		@@ -217,6 +217,96 @@
		};
		};
		};

		q6-dsp-thermal {
		polling-delay-passive = <250>;
		polling-delay = <1000>;

		thermal-sensors = <&tsens 1>;

		trips {
		q6_dsp_alert0: trip-point0 {
		temperature = <90000>;
		hysteresis = <2000>;
		type = "hot";
		};
		};
		};

		modemtx-thermal {
		polling-delay-passive = <250>;
		polling-delay = <1000>;

		thermal-sensors = <&tsens 2>;

		trips {
		modemtx_alert0: trip-point0 {
		temperature = <90000>;
		hysteresis = <2000>;
		type = "hot";
		};
		};
		};

		video-thermal {
		polling-delay-passive = <250>;
		polling-delay = <1000>;

		thermal-sensors = <&tsens 3>;

		trips {
		video_alert0: trip-point0 {
		temperature = <95000>;
		hysteresis = <2000>;
		type = "hot";
		};
		};
		};

		wlan-thermal {
		polling-delay-passive = <250>;
		polling-delay = <1000>;

		thermal-sensors = <&tsens 4>;

		trips {
		wlan_alert0: trip-point0 {
		temperature = <105000>;
		hysteresis = <2000>;
		type = "hot";
		};
		};
		};

		gpu-thermal-top {
		polling-delay-passive = <250>;
		polling-delay = <1000>;

		thermal-sensors = <&tsens 9>;

		trips {
		gpu1_alert0: trip-point0 {
		temperature = <90000>;
		hysteresis = <2000>;
		type = "hot";
		};
		};
		};

		gpu-thermal-bottom {
		polling-delay-passive = <250>;
		polling-delay = <1000>;

		thermal-sensors = <&tsens 10>;

		trips {
		gpu2_alert0: trip-point0 {
		temperature = <90000>;
		hysteresis = <2000>;
		type = "hot";
		};
		};
		};
		};

		cpu-pmu {

CRA Git | Maintained and supported by SUSTech CRA and CCSE