Commit 14004f04 authored by Dan McGee's avatar Dan McGee Committed by Jeff Garzik
Browse files

pata_sis: enable MWDMA for UDMA 133 chipset 



This ports the timing values over from the old IDE driver into the new
PATA-based one. The comment was lying when it stated the old driver was
not MWDMA capable.

Boot tested on actual hardware using 'libata.force=mwdma2'.

Signed-off-by: default avatarDan McGee <dpmcgee@gmail.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent f30f9a5e

drivers/ata/pata_sis.c

+17 −8
Original line number Diff line number Diff line
@@ -485,21 +485,30 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) 
	int port;

	u32 t1;



	/* bits 4- cycle time 8 - cvs time */

	static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };

	static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };



	port = sis_port_base(adev);

	pci_read_config_dword(pdev, port, &t1);



	if (adev->dma_mode < XFER_UDMA_0) {

		/* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */

		static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 };

		static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 };

		int speed = adev->dma_mode - XFER_MW_DMA_0;



		t1 &= 0xC0C00FFF;

		/* disable UDMA */

		t1 &= ~0x00000004;

		/* FIXME: need data sheet to add MWDMA here. Also lacking on

		   ide/pci driver */

		if (t1 & 0x08)

			t1 |= timing_u133[speed];

		else

			t1 |= timing_u100[speed];

	} else {

		/* bits 4- cycle time 8 - cvs time */

		static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };

		static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };

		int speed = adev->dma_mode - XFER_UDMA_0;

		/* if & 8 no UDMA133 - need info for ... */



		t1 &= ~0x00000FF0;

		/* enable UDMA */

		t1 |= 0x00000004;

		if (t1 & 0x08)

			t1 |= timing_u133[speed];
@@ -620,7 +629,7 @@ static const struct ata_port_info sis_info100_early = { 
static const struct ata_port_info sis_info133 = {

	.flags		= ATA_FLAG_SLAVE_POSS,

	.pio_mask	= ATA_PIO4,

	/* No MWDMA */

	.mwdma_mask	= ATA_MWDMA2,

	.udma_mask	= ATA_UDMA6,

	.port_ops	= &sis_133_ops,

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE