arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs (13b31e6b) · Commits · 戴 / test

The Orange Pi Win exposes several UARTs on header pins, and connects one to the on-board WiFi/Bluetooth chip. Add the pinmux definitions to the UART nodes, but keep them disabled. Enable the UART1, which is wired to the Bluetooth chip, and add a serdev node. There is no binding for the BT8723 yet, so leave this mostly empty for now. Signed-off-by:

Samuel Holland <samuel@sholland.org> Signed-off-by:

Andre Przywara <andre.przywara@arm.com> Acked-by:

Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:

Chen-Yu Tsai <wens@csie.org>

arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts

+33 −0

Original line number	Diff line number	Diff line
		@@ -54,6 +54,10 @@
		aliases {
		ethernet0 = &emac;
		serial0 = &uart0;
		serial1 = &uart1;
		serial2 = &uart2;
		serial3 = &uart3;
		serial4 = &uart4;
		};

		chosen {
		@@ -250,12 +254,41 @@
		vcc-hdmi-supply = <&reg_dldo1>;
		};

		/* On debug connector */
		&uart0 {
		pinctrl-names = "default";
		pinctrl-0 = <&uart0_pins_a>;
		status = "okay";
		};

		/* Bluetooth */
		&uart1 {
		pinctrl-names = "default";
		pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
		status = "okay";
		};

		/* On Pi-2 connector, RTS/CTS optional */
		&uart2 {
		pinctrl-names = "default";
		pinctrl-0 = <&uart2_pins>;
		status = "disabled";
		};

		/* On Pi-2 connector, RTS/CTS optional */
		&uart3 {
		pinctrl-names = "default";
		pinctrl-0 = <&uart3_pins>;
		status = "disabled";
		};

		/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
		&uart4 {
		pinctrl-names = "default";
		pinctrl-0 = <&uart4_pins>;
		status = "disabled";
		};

		&usb_otg {
		dr_mode = "otg";
		status = "okay";

Admin message