Commit 138651e1 authored by Ji-Ze Hong (Peter Hong)'s avatar Ji-Ze Hong (Peter Hong) Committed by Johan Hovold
Browse files

USB: serial: f81534: add output pin control 



The F81532/534 had 3 output pin (M0/SD, M1, M2) with open-drain mode to
control transceiver. We'll read it from internal Flash with address
0x2f05~0x2f08 for 4 ports. The value is range from 0 to 7. The M0/SD is
MSB of this value. For a examples, If read value is 6, we'll write M0/SD,
M1, M2 as 1, 1, 0.

Signed-off-by: default avatarJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parent ee0309b4

drivers/usb/serial/f81534.c

+66 −1
Original line number Diff line number Diff line
@@ -52,6 +52,7 @@ 
#define F81534_CUSTOM_NO_CUSTOM_DATA	0xff

#define F81534_CUSTOM_VALID_TOKEN	0xf0

#define F81534_CONF_OFFSET		1

#define F81534_CONF_GPIO_OFFSET		4



#define F81534_MAX_DATA_BLOCK		64

#define F81534_MAX_BUS_RETRY		20
@@ -164,6 +165,23 @@ struct f81534_port_private { 
	u8 phy_num;

};



struct f81534_pin_data {

	const u16 reg_addr;

	const u8 reg_mask;

};



struct f81534_port_out_pin {

	struct f81534_pin_data pin[3];

};



/* Pin output value for M2/M1/M0(SD) */

static const struct f81534_port_out_pin f81534_port_out_pins[] = {

	 { { { 0x2ae8, BIT(7) }, { 0x2a90, BIT(5) }, { 0x2a90, BIT(4) } } },

	 { { { 0x2ae8, BIT(6) }, { 0x2ae8, BIT(0) }, { 0x2ae8, BIT(3) } } },

	 { { { 0x2a90, BIT(0) }, { 0x2ae8, BIT(2) }, { 0x2a80, BIT(6) } } },

	 { { { 0x2a90, BIT(3) }, { 0x2a90, BIT(2) }, { 0x2a90, BIT(1) } } },

};



static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };

static u8 const clock_table[] = { F81534_CLK_1_846_MHZ, F81534_CLK_14_77_MHZ,

				F81534_CLK_18_46_MHZ, F81534_CLK_24_MHZ };
@@ -273,6 +291,22 @@ end: 
	return status;

}



static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,

					u8 mask, u8 data)

{

	int status;

	u8 tmp;



	status = f81534_get_register(serial, reg, &tmp);

	if (status)

		return status;



	tmp &= ~mask;

	tmp |= (mask & data);



	return f81534_set_register(serial, reg, tmp);

}



static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,

					u8 data)

{
@@ -1281,6 +1315,37 @@ static void f81534_lsr_worker(struct work_struct *work) 
		dev_warn(&port->dev, "read LSR failed: %d\n", status);

}



static int f81534_set_port_output_pin(struct usb_serial_port *port)

{

	struct f81534_serial_private *serial_priv;

	struct f81534_port_private *port_priv;

	struct usb_serial *serial;

	const struct f81534_port_out_pin *pins;

	int status;

	int i;

	u8 value;

	u8 idx;



	serial = port->serial;

	serial_priv = usb_get_serial_data(serial);

	port_priv = usb_get_serial_port_data(port);



	idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num;

	value = serial_priv->conf_data[idx];

	pins = &f81534_port_out_pins[port_priv->phy_num];



	for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {

		status = f81534_set_mask_register(serial,

				pins->pin[i].reg_addr, pins->pin[i].reg_mask,

				value & BIT(i) ? pins->pin[i].reg_mask : 0);

		if (status)

			return status;

	}



	dev_dbg(&port->dev, "Output pin (M0/M1/M2): %d\n", value);

	return 0;

}



static int f81534_port_probe(struct usb_serial_port *port)

{

	struct f81534_serial_private *serial_priv;
@@ -1339,7 +1404,7 @@ static int f81534_port_probe(struct usb_serial_port *port) 
		break;

	}



	return 0;

	return f81534_set_port_output_pin(port);

}



static int f81534_port_remove(struct usb_serial_port *port)

CRA Git | Maintained and supported by SUSTech CRA and CCSE