Commit 12ec9384 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet 



The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.

Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.

The PCB has no markings to speak of.

This dts file does not add support for the ft5x touchscreen found at
i2c bus 1, addr 0x38, irq PG11, because it does not work out of the box.
It seems it has been flashed with the wrong firmware and needs to have
alternative firmware uploaded at boot to make the touchscreen work
properly, when hot-booting from android into an upstream kernel the
touchscreen does work.

The Memsic MXC622X accelerometer at i2c bus 1, addr 0x15 also is not
enabled as there is no driver for it.

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent b3a9995e

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -612,6 +612,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ 
	sun5i-a10s-olinuxino-micro.dtb \

	sun5i-a10s-r7-tv-dongle.dtb \

	sun5i-a10s-wobo-i5.dtb \

	sun5i-a13-empire-electronix-d709.dtb \

	sun5i-a13-hsg-h702.dtb \

	sun5i-a13-inet-98v-rev2.dtb \

	sun5i-a13-olinuxino.dtb \

arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts

0 → 100644
+241 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun5i-a13.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>

#include <dt-bindings/pwm/pwm.h>



/ {

	model = "Empire Electronix D709 tablet";

	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";



	aliases {

		serial0 = &uart1;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;

		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <8>;

		/* TODO: backlight uses axp gpio1 as enable pin */

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};

};



&cpu0 {

	cpu-supply = <&reg_dcdc2>;

};



&ehci0 {

	status = "okay";

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";



	axp209: pmic@34 {

		reg = <0x34>;

		interrupts = <0>;

	};

};



#include "axp209.dtsi"



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	status = "okay";



	pcf8563: rtc@51 {

		compatible = "nxp,pcf8563";

		reg = <0x51>;

	};

};



&lradc {

	vref-supply = <&reg_ldo2>;

	status = "okay";



	button@200 {

		label = "Volume Up";

		linux,code = <KEY_VOLUMEUP>;

		channel = <0>;

		voltage = <200000>;

	};



	button@400 {

		label = "Volume Down";

		linux,code = <KEY_VOLUMEDOWN>;

		channel = <0>;

		voltage = <400000>;

	};

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */

	cd-inverted;

	status = "okay";

};



&mmc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins_a>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <8>;

	non-removable;

	status = "okay";



	mmccard: mmccard@0 {

		reg = <0>;

		compatible = "mmc-card";

		broken-hpi;

	};

};



&otg_sram {

	status = "okay";

};



&pio {

	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {

		allwinner,pins = "PG0";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {

		allwinner,pins = "PG1";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;

	};



	usb0_id_detect_pin: usb0_id_detect_pin@0 {

		allwinner,pins = "PG2";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

};



&pwm {

	pinctrl-names = "default";

	pinctrl-0 = <&pwm0_pins>;

	status = "okay";

};



&reg_dcdc2 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1400000>;

	regulator-name = "vdd-cpu";

};



&reg_dcdc3 {

	regulator-always-on;

	regulator-min-microvolt = <1250000>;

	regulator-max-microvolt = <1250000>;

	regulator-name = "vdd-int-pll";

};



&reg_ldo1 {

	regulator-name = "vdd-rtc";

};



&reg_ldo2 {

	regulator-always-on;

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

	regulator-name = "avcc";

};



&reg_ldo3 {

	regulator-min-microvolt = <3300000>;

	regulator-max-microvolt = <3300000>;

	regulator-name = "vcc-wifi";

};



&reg_usb0_vbus {

	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins_b>;

	status = "okay";

};



&usb_otg {

	dr_mode = "otg";

	status = "okay";

};



&usb0_vbus_pin_a {

	allwinner,pins = "PG12";

};



&usbphy {

	pinctrl-names = "default";

	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */

	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */

	usb0_vbus-supply = <&reg_usb0_vbus>;

	usb1_vbus-supply = <&reg_ldo3>;

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE