Commit 12a40a57 authored by Huang Shijie's avatar Huang Shijie Committed by David Woodhouse
Browse files

mtd: add init_size hook for NAND driver 



Not all the NAND devices have all the information in additional
id bytes.

So add a hook in the nand_chip{} is a good method to calculate the
right value of oobsize, erasesize and so on.

Without the hook,you will get the wrong value, and you have to hack
in the ->scan_bbt() to change the wrong value which make the code
mess.

Signed-off-by: default avatarHuang Shijie <shijie8@gmail.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 088bd455

drivers/mtd/nand/nand_base.c

+4 −2
Original line number Diff line number Diff line
@@ -2976,8 +2976,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, 


	chip->chipsize = (uint64_t)type->chipsize << 20;



	/* Newer devices have all the information in additional id bytes */

	if (!type->pagesize) {

	if (!type->pagesize && chip->init_size) {

		/* set the pagesize, oobsize, erasesize by the driver*/

		busw = chip->init_size(mtd, chip, id_data);

	} else if (!type->pagesize) {

		int extid;

		/* The 3rd id byte holds MLC / multichip data */

		chip->cellinfo = id_data[2];

include/linux/mtd/nand.h

+6 −0
Original line number Diff line number Diff line
@@ -396,6 +396,10 @@ struct nand_buffers { 
 * @block_markbad:	[REPLACEABLE] mark the block bad

 * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific funtion for controlling

 *			ALE/CLE/nCE. Also used to write command and address

 * @init_size:		[BOARDSPECIFIC] hardwarespecific funtion for setting

 *			mtd->oobsize, mtd->writesize and so on.

 *			@id_data contains the 8 bytes values of NAND_CMD_READID.

 *			Return with the bus width.

 * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line

 *			If set to NULL no access to ready/busy is available and the ready/busy information

 *			is read from the chip status register
@@ -452,6 +456,8 @@ struct nand_chip { 
	int		(*block_markbad)(struct mtd_info *mtd, loff_t ofs);

	void		(*cmd_ctrl)(struct mtd_info *mtd, int dat,

				    unsigned int ctrl);

	int		(*init_size)(struct mtd_info *mtd,

					struct nand_chip *this, u8 *id_data);

	int		(*dev_ready)(struct mtd_info *mtd);

	void		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);

	int		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);

CRA Git | Maintained and supported by SUSTech CRA and CCSE