Commit 12459cbd authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'phy-mdio-split' 



Florian Fainelli says:

====================
net: phy: Allow splitting MDIO bus/device support

This patch series allows building support for MDIO bus controllers which
are sometimes usable and necessary in cases where there are no Ethernet PHYs.

Changes in v3:
- corrected of_mdio compile guards for prototypes vs. stubs
- added a missing OF_MDIO dependency for MDIO_BCM_UNIMAC
- fixed Kbuild bot reported errors against mdio-bitbang

Changes in v2:
- implement Russell's feedback
- solve the circular dependency in the CONFIG_MDIO_DEVICE + CONFIG_PHYLIB case
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 5952fde1 90eff909

drivers/net/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -18,7 +18,7 @@ obj-$(CONFIG_MII) += mii.o 
obj-$(CONFIG_MDIO) += mdio.o

obj-$(CONFIG_NET) += Space.o loopback.o

obj-$(CONFIG_NETCONSOLE) += netconsole.o

obj-$(CONFIG_PHYLIB) += phy/

obj-$(CONFIG_MDIO_DEVICE) += phy/

obj-$(CONFIG_RIONET) += rionet.o

obj-$(CONFIG_NET_TEAM) += team/

obj-$(CONFIG_TUN) += tun.o

drivers/net/phy/Kconfig

+36 −26
Original line number Diff line number Diff line
@@ -2,33 +2,12 @@ 
# PHY Layer Configuration

#



menuconfig PHYLIB

	tristate "PHY Device support and infrastructure"

	depends on NETDEVICES

menuconfig MDIO_DEVICE

	tristate "MDIO bus device drivers"

	help

	  Ethernet controllers are usually attached to PHY

	  devices.  This option provides infrastructure for

	  managing PHY devices.



if PHYLIB

	   MDIO devices and driver infrastructure code.



config SWPHY

	bool



config LED_TRIGGER_PHY

	bool "Support LED triggers for tracking link state"

	depends on LEDS_TRIGGERS

	---help---

	  Adds support for a set of LED trigger events per-PHY.  Link

	  state change will trigger the events, for consumption by an

	  LED class driver.  There are triggers for each link speed currently

	  supported by the phy, and are of the form:

	       <mii bus id>:<phy>:<speed>



	  Where speed is in the form:

		<Speed in megabits>Mbps or <Speed in gigabits>Gbps



comment "MDIO bus device drivers"

if MDIO_DEVICE



config MDIO_BCM_IPROC

	tristate "Broadcom iProc MDIO bus controller"
@@ -40,7 +19,7 @@ config MDIO_BCM_IPROC 


config MDIO_BCM_UNIMAC

	tristate "Broadcom UniMAC MDIO bus controller"

	depends on HAS_IOMEM

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the Broadcom UniMAC MDIO busses.

	  This hardware can be found in the Broadcom GENET Ethernet MAC
@@ -49,6 +28,7 @@ config MDIO_BCM_UNIMAC 


config MDIO_BITBANG

	tristate "Bitbanged MDIO buses"

	depends on !(MDIO_DEVICE=y && PHYLIB=m)

	help

	  This module implements the MDIO bus protocol in software,

	  for use by low level drivers that export the ability to
@@ -160,6 +140,36 @@ config MDIO_XGENE 
	  This module provides a driver for the MDIO busses found in the

	  APM X-Gene SoC's.



endif



menuconfig PHYLIB

	tristate "PHY Device support and infrastructure"

	depends on NETDEVICES

	select MDIO_DEVICE

	help

	  Ethernet controllers are usually attached to PHY

	  devices.  This option provides infrastructure for

	  managing PHY devices.



if PHYLIB



config SWPHY

	bool



config LED_TRIGGER_PHY

	bool "Support LED triggers for tracking link state"

	depends on LEDS_TRIGGERS

	---help---

	  Adds support for a set of LED trigger events per-PHY.  Link

	  state change will trigger the events, for consumption by an

	  LED class driver.  There are triggers for each link speed currently

	  supported by the phy, and are of the form:

	       <mii bus id>:<phy>:<speed>



	  Where speed is in the form:

		<Speed in megabits>Mbps or <Speed in gigabits>Gbps





comment "MII PHY device drivers"



config AMD_PHY

drivers/net/phy/Makefile

+11 −2
Original line number Diff line number Diff line 
# Makefile for Linux PHY drivers and MDIO bus drivers



libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o \

				   mdio-boardinfo.o phy-core.o

libphy-y			:= phy.o phy-core.o phy_device.o

mdio-bus-y			+= mdio_bus.o mdio_device.o mdio-boardinfo.o



# PHYLIB implies MDIO_DEVICE, in that case, we have a bunch of circular

# dependencies that does not make it possible to split mdio-bus objects into a

# dedicated loadable module, so we bundle them all together into libphy.ko

ifdef CONFIG_PHYLIB

libphy-y			+= $(mdio-bus-y)

else

obj-$(CONFIG_MDIO_DEVICE)	+= mdio-bus.o

endif

libphy-$(CONFIG_SWPHY)		+= swphy.o

libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_led_triggers.o

drivers/net/phy/mdio-boardinfo.c

+1 −0
Original line number Diff line number Diff line
@@ -84,3 +84,4 @@ int mdiobus_register_board_info(const struct mdio_board_info *info, 


	return 0;

}

EXPORT_SYMBOL(mdiobus_register_board_info);

drivers/net/phy/mdio_bus.c

+9 −0
Original line number Diff line number Diff line
@@ -648,9 +648,18 @@ int __init mdio_bus_init(void) 


	return ret;

}

EXPORT_SYMBOL_GPL(mdio_bus_init);



#if IS_ENABLED(CONFIG_PHYLIB)

void mdio_bus_exit(void)

{

	class_unregister(&mdio_bus_class);

	bus_unregister(&mdio_bus_type);

}

EXPORT_SYMBOL_GPL(mdio_bus_exit);

#else

module_init(mdio_bus_init);

/* no module_exit, intentional */

MODULE_LICENSE("GPL");

MODULE_DESCRIPTION("MDIO bus/device layer");

#endif

CRA Git | Maintained and supported by SUSTech CRA and CCSE