[PATCH] PAL: Support of the fixed PHY (11b0bacd) · Commits · 戴 / test

drivers/net/phy/Kconfig

+17 −0

Original line number	Diff line number	Diff line
		@@ -56,5 +56,22 @@ config SMSC_PHY
		---help---
		Currently supports the LAN83C185 PHY

		config FIXED_PHY
		tristate "Drivers for PHY emulation on fixed speed/link"
		depends on PHYLIB
		---help---
		Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
		but with the ability to manipulate with speed/link in software. The relavant MII
		speed/duplex parameters could be effectively handled in user-specified fuction.
		Currently tested with mpc866ads.

		config FIXED_MII_10_FDX
		bool "Emulation for 10M Fdx fixed PHY behavior"
		depends on FIXED_PHY

		config FIXED_MII_100_FDX
		bool "Emulation for 100M Fdx fixed PHY behavior"
		depends on FIXED_PHY

		endmenu

drivers/net/phy/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -10,3 +10,4 @@ obj-$(CONFIG_LXT_PHY) += lxt.o
		obj-$(CONFIG_QSEMI_PHY) += qsemi.o
		obj-$(CONFIG_SMSC_PHY) += smsc.o
		obj-$(CONFIG_VITESSE_PHY) += vitesse.o
		obj-$(CONFIG_FIXED_PHY) += fixed.o

drivers/net/phy/fixed.c

0 → 100644

+358 −0

Original line number	Diff line number	Diff line
		/*
		* drivers/net/phy/fixed.c
		*
		* Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
		*
		* Author: Vitaly Bordug
		*
		* Copyright (c) 2006 MontaVista Software, Inc.
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the
		* Free Software Foundation; either version 2 of the License, or (at your
		* option) any later version.
		*
		*/
		#include <linux/config.h>
		#include <linux/kernel.h>
		#include <linux/sched.h>
		#include <linux/string.h>
		#include <linux/errno.h>
		#include <linux/unistd.h>
		#include <linux/slab.h>
		#include <linux/interrupt.h>
		#include <linux/init.h>
		#include <linux/delay.h>
		#include <linux/netdevice.h>
		#include <linux/etherdevice.h>
		#include <linux/skbuff.h>
		#include <linux/spinlock.h>
		#include <linux/mm.h>
		#include <linux/module.h>
		#include <linux/mii.h>
		#include <linux/ethtool.h>
		#include <linux/phy.h>

		#include <asm/io.h>
		#include <asm/irq.h>
		#include <asm/uaccess.h>

		#define MII_REGS_NUM 7

		/*
		The idea is to emulate normal phy behavior by responding with
		pre-defined values to mii BMCR read, so that read_status hook could
		take all the needed info.
		*/

		struct fixed_phy_status {
		u8 link;
		u16 speed;
		u8 duplex;
		};

		/*-----------------------------------------------------------------------------
		* Private information hoder for mii_bus
		-----------------------------------------------------------------------------/
		struct fixed_info {
		u16 *regs;
		u8 regs_num;
		struct fixed_phy_status phy_status;
		struct phy_device phydev; / pointer to the container */
		/* link & speed cb */
		int(link_update)(struct net_device, struct fixed_phy_status*);

		};

		/*-----------------------------------------------------------------------------
		* If something weird is required to be done with link/speed,
		* network driver is able to assign a function to implement this.
		* May be useful for PHY's that need to be software-driven.
		-----------------------------------------------------------------------------/
		int fixed_mdio_set_link_update(struct phy_device* phydev,
		int(link_update)(struct net_device, struct fixed_phy_status*))
		{
		struct fixed_info *fixed;

		if(link_update == NULL)
		return -EINVAL;

		if(phydev) {
		if(phydev->bus) {
		fixed = phydev->bus->priv;
		fixed->link_update = link_update;
		return 0;
		}
		}
		return -EINVAL;
		}
		EXPORT_SYMBOL(fixed_mdio_set_link_update);

		/*-----------------------------------------------------------------------------
		* This is used for updating internal mii regs from the status
		-----------------------------------------------------------------------------/
		static int fixed_mdio_update_regs(struct fixed_info *fixed)
		{
		u16 *regs = fixed->regs;
		u16 bmsr = 0;
		u16 bmcr = 0;

		if(!regs) {
		printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
		return -EINVAL;
		}

		if(fixed->phy_status.link)
		bmsr \|= BMSR_LSTATUS;

		if(fixed->phy_status.duplex) {
		bmcr \|= BMCR_FULLDPLX;

		switch ( fixed->phy_status.speed ) {
		case 100:
		bmsr \|= BMSR_100FULL;
		bmcr \|= BMCR_SPEED100;
		break;

		case 10:
		bmsr \|= BMSR_10FULL;
		break;
		}
		} else {
		switch ( fixed->phy_status.speed ) {
		case 100:
		bmsr \|= BMSR_100HALF;
		bmcr \|= BMCR_SPEED100;
		break;

		case 10:
		bmsr \|= BMSR_100HALF;
		break;
		}
		}

		regs[MII_BMCR] = bmcr;
		regs[MII_BMSR] = bmsr \| 0x800; /we are always capable of 10 hdx/

		return 0;
		}

		static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
		{
		struct fixed_info *fixed = bus->priv;

		/* if user has registered link update callback, use it */
		if(fixed->phydev)
		if(fixed->phydev->attached_dev) {
		if(fixed->link_update) {
		fixed->link_update(fixed->phydev->attached_dev,
		&fixed->phy_status);
		fixed_mdio_update_regs(fixed);
		}
		}

		if ((unsigned int)location >= fixed->regs_num)
		return -1;
		return fixed->regs[location];
		}

		static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val)
		{
		/* do nothing for now*/
		return 0;
		}

		static int fixed_mii_reset(struct mii_bus *bus)
		{
		/nothing here - no way/need to reset it/
		return 0;
		}

		static int fixed_config_aneg(struct phy_device *phydev)
		{
		/* :TODO:03/13/2006 09:45:37 PM::
		The full autoneg funcionality can be emulated,
		but no need to have anything here for now
		*/
		return 0;
		}

		/*-----------------------------------------------------------------------------
		* the manual bind will do the magic - with phy_id_mask == 0
		* match will never return true...
		-----------------------------------------------------------------------------/
		static struct phy_driver fixed_mdio_driver = {
		.name = "Fixed PHY",
		.features = PHY_BASIC_FEATURES,
		.config_aneg = fixed_config_aneg,
		.read_status = genphy_read_status,
		.driver = { .owner = THIS_MODULE,},
		};

		/*-----------------------------------------------------------------------------
		* This func is used to create all the necessary stuff, bind
		* the fixed phy driver and register all it on the mdio_bus_type.
		* speed is either 10 or 100, duplex is boolean.
		* number is used to create multiple fixed PHYs, so that several devices can
		* utilize them simultaneously.
		-----------------------------------------------------------------------------/
		static int fixed_mdio_register_device(int number, int speed, int duplex)
		{
		struct mii_bus *new_bus;
		struct fixed_info *fixed;
		struct phy_device *phydev;
		int err = 0;

		struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL);

		if (NULL == dev)
		return -ENOMEM;

		new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);

		if (NULL == new_bus) {
		kfree(dev);
		return -ENOMEM;
		}
		fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);

		if (NULL == fixed) {
		kfree(dev);
		kfree(new_bus);
		return -ENOMEM;
		}

		fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
		fixed->regs_num = MII_REGS_NUM;
		fixed->phy_status.speed = speed;
		fixed->phy_status.duplex = duplex;
		fixed->phy_status.link = 1;

		new_bus->name = "Fixed MII Bus",
		new_bus->read = &fixed_mii_read,
		new_bus->write = &fixed_mii_write,
		new_bus->reset = &fixed_mii_reset,

		/set up workspace/
		fixed_mdio_update_regs(fixed);
		new_bus->priv = fixed;

		new_bus->dev = dev;
		dev_set_drvdata(dev, new_bus);

		/* create phy_device and register it on the mdio bus */
		phydev = phy_device_create(new_bus, 0, 0);

		/*
		Put the phydev pointer into the fixed pack so that bus read/write code could
		be able to access for instance attached netdev. Well it doesn't have to do
		so, only in case of utilizing user-specified link-update...
		*/
		fixed->phydev = phydev;

		if(NULL == phydev) {
		err = -ENOMEM;
		goto device_create_fail;
		}

		phydev->irq = -1;
		phydev->dev.bus = &mdio_bus_type;

		if(number)
		snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
		"fixed_%d@%d:%d", number, speed, duplex);
		else
		snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
		"fixed@%d:%d", speed, duplex);
		phydev->bus = new_bus;

		err = device_register(&phydev->dev);
		if(err) {
		printk(KERN_ERR "Phy %s failed to register\n",
		phydev->dev.bus_id);
		goto bus_register_fail;
		}

		/*
		the mdio bus has phy_id match... In order not to do it
		artificially, we are binding the driver here by hand;
		it will be the same for all the fixed phys anyway.
		*/
		down_write(&phydev->dev.bus->subsys.rwsem);

		phydev->dev.driver = &fixed_mdio_driver.driver;

		err = phydev->dev.driver->probe(&phydev->dev);
		if(err < 0) {
		printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id);
		up_write(&phydev->dev.bus->subsys.rwsem);
		goto probe_fail;
		}

		device_bind_driver(&phydev->dev);
		up_write(&phydev->dev.bus->subsys.rwsem);

		return 0;

		probe_fail:
		device_unregister(&phydev->dev);
		bus_register_fail:
		kfree(phydev);
		device_create_fail:
		kfree(dev);
		kfree(new_bus);
		kfree(fixed);

		return err;
		}


		MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
		MODULE_AUTHOR("Vitaly Bordug");
		MODULE_LICENSE("GPL");

		static int __init fixed_init(void)
		{
		int ret;
		int duplex = 0;

		/* register on the bus... Not expected to be matched with anything there... */
		phy_driver_register(&fixed_mdio_driver);

		/* So let the fun begin...
		We will create several mdio devices here, and will bound the upper
		driver to them.

		Then the external software can lookup the phy bus by searching
		fixed@speed:duplex, e.g. fixed@100:1, to be connected to the
		virtual 100M Fdx phy.

		In case several virtual PHYs required, the bus_id will be in form
		fixed_<num>@<speed>:<duplex>, which make it able even to define
		driver-specific link control callback, if for instance PHY is completely
		SW-driven.

		*/

		#ifdef CONFIG_FIXED_MII_DUPLEX
		duplex = 1;
		#endif

		#ifdef CONFIG_FIXED_MII_100_FDX
		fixed_mdio_register_device(0, 100, 1);
		#endif

		#ifdef CONFIX_FIXED_MII_10_FDX
		fixed_mdio_register_device(0, 10, 1);
		#endif
		return 0;
		}

		static void __exit fixed_exit(void)
		{
		phy_driver_unregister(&fixed_mdio_driver);
		/* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */
		}

		module_init(fixed_init);
		module_exit(fixed_exit);

drivers/net/phy/mdio_bus.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -159,6 +159,7 @@ struct bus_type mdio_bus_type = {
		.suspend = mdio_bus_suspend,
		.resume = mdio_bus_resume,
		};
		EXPORT_SYMBOL(mdio_bus_type);

		int __init mdio_bus_init(void)
		{

drivers/net/phy/phy_device.c

+30 −21

Original line number	Diff line number	Diff line
		@@ -45,6 +45,35 @@ static struct phy_driver genphy_driver;
		extern int mdio_bus_init(void);
		extern void mdio_bus_exit(void);

		struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
		{
		struct phy_device *dev;
		/* We allocate the device, and initialize the
		* default values */
		dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);

		if (NULL == dev)
		return (struct phy_device) PTR_ERR((void)-ENOMEM);

		dev->speed = 0;
		dev->duplex = -1;
		dev->pause = dev->asym_pause = 0;
		dev->link = 1;

		dev->autoneg = AUTONEG_ENABLE;

		dev->addr = addr;
		dev->phy_id = phy_id;
		dev->bus = bus;

		dev->state = PHY_DOWN;

		spin_lock_init(&dev->lock);

		return dev;
		}
		EXPORT_SYMBOL(phy_device_create);

		/* get_phy_device
		*
		* description: Reads the ID registers of the PHY at addr on the
		@@ -78,27 +107,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
		if (0xffffffff == phy_id)
		return NULL;

		/* Otherwise, we allocate the device, and initialize the
		* default values */
		dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);

		if (NULL == dev)
		return ERR_PTR(-ENOMEM);

		dev->speed = 0;
		dev->duplex = -1;
		dev->pause = dev->asym_pause = 0;
		dev->link = 1;

		dev->autoneg = AUTONEG_ENABLE;

		dev->addr = addr;
		dev->phy_id = phy_id;
		dev->bus = bus;

		dev->state = PHY_DOWN;

		spin_lock_init(&dev->lock);
		dev = phy_device_create(bus, addr, phy_id);

		return dev;
		}

Admin message