watchdog: qcom: add support for KPSS WDT (1094ebe9) · Commits · 戴 / test

drivers/watchdog/Kconfig

+13 −0

Original line number	Diff line number	Diff line
		@@ -461,6 +461,19 @@ config TEGRA_WATCHDOG
		To compile this driver as a module, choose M here: the
		module will be called tegra_wdt.

		config QCOM_WDT
		tristate "QCOM watchdog"
		depends on HAS_IOMEM
		depends on ARCH_QCOM
		select WATCHDOG_CORE
		help
		Say Y here to include Watchdog timer support for the watchdog found
		on QCOM chipsets. Currently supported targets are the MSM8960,
		APQ8064, and IPQ8064.

		To compile this driver as a module, choose M here: the
		module will be called qcom_wdt.

		# AVR32 Architecture

		config AT32AP700X_WDT

drivers/watchdog/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -58,6 +58,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
		obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
		obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
		obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
		obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
		obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
		obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o

drivers/watchdog/qcom-wdt.c

0 → 100644

+186 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		*/
		#include <linux/clk.h>
		#include <linux/io.h>
		#include <linux/kernel.h>
		#include <linux/module.h>
		#include <linux/of.h>
		#include <linux/platform_device.h>
		#include <linux/watchdog.h>

		#define WDT_RST 0x0
		#define WDT_EN 0x8
		#define WDT_BITE_TIME 0x24

		struct qcom_wdt {
		struct watchdog_device wdd;
		struct clk *clk;
		unsigned long rate;
		void __iomem *base;
		};

		static inline
		struct qcom_wdt to_qcom_wdt(struct watchdog_device wdd)
		{
		return container_of(wdd, struct qcom_wdt, wdd);
		}

		static int qcom_wdt_start(struct watchdog_device *wdd)
		{
		struct qcom_wdt *wdt = to_qcom_wdt(wdd);

		writel(0, wdt->base + WDT_EN);
		writel(1, wdt->base + WDT_RST);
		writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
		writel(1, wdt->base + WDT_EN);
		return 0;
		}

		static int qcom_wdt_stop(struct watchdog_device *wdd)
		{
		struct qcom_wdt *wdt = to_qcom_wdt(wdd);

		writel(0, wdt->base + WDT_EN);
		return 0;
		}

		static int qcom_wdt_ping(struct watchdog_device *wdd)
		{
		struct qcom_wdt *wdt = to_qcom_wdt(wdd);

		writel(1, wdt->base + WDT_RST);
		return 0;
		}

		static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
		unsigned int timeout)
		{
		wdd->timeout = timeout;
		return qcom_wdt_start(wdd);
		}

		static const struct watchdog_ops qcom_wdt_ops = {
		.start = qcom_wdt_start,
		.stop = qcom_wdt_stop,
		.ping = qcom_wdt_ping,
		.set_timeout = qcom_wdt_set_timeout,
		.owner = THIS_MODULE,
		};

		static const struct watchdog_info qcom_wdt_info = {
		.options = WDIOF_KEEPALIVEPING
		\| WDIOF_MAGICCLOSE
		\| WDIOF_SETTIMEOUT,
		.identity = KBUILD_MODNAME,
		};

		static int qcom_wdt_probe(struct platform_device *pdev)
		{
		struct qcom_wdt *wdt;
		struct resource *res;
		int ret;

		wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
		if (!wdt)
		return -ENOMEM;

		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
		wdt->base = devm_ioremap_resource(&pdev->dev, res);
		if (IS_ERR(wdt->base))
		return PTR_ERR(wdt->base);

		wdt->clk = devm_clk_get(&pdev->dev, NULL);
		if (IS_ERR(wdt->clk)) {
		dev_err(&pdev->dev, "failed to get input clock\n");
		return PTR_ERR(wdt->clk);
		}

		ret = clk_prepare_enable(wdt->clk);
		if (ret) {
		dev_err(&pdev->dev, "failed to setup clock\n");
		return ret;
		}

		/*
		* We use the clock rate to calculate the max timeout, so ensure it's
		* not zero to avoid a divide-by-zero exception.
		*
		* WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
		* that it would bite before a second elapses it's usefulness is
		* limited. Bail if this is the case.
		*/
		wdt->rate = clk_get_rate(wdt->clk);
		if (wdt->rate == 0 \|\|
		wdt->rate > 0x10000000U) {
		dev_err(&pdev->dev, "invalid clock rate\n");
		ret = -EINVAL;
		goto err_clk_unprepare;
		}

		wdt->wdd.dev = &pdev->dev;
		wdt->wdd.info = &qcom_wdt_info;
		wdt->wdd.ops = &qcom_wdt_ops;
		wdt->wdd.min_timeout = 1;
		wdt->wdd.max_timeout = 0x10000000U / wdt->rate;

		/*
		* If 'timeout-sec' unspecified in devicetree, assume a 30 second
		* default, unless the max timeout is less than 30 seconds, then use
		* the max instead.
		*/
		wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
		watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);

		ret = watchdog_register_device(&wdt->wdd);
		if (ret) {
		dev_err(&pdev->dev, "failed to register watchdog\n");
		goto err_clk_unprepare;
		}

		platform_set_drvdata(pdev, wdt);
		return 0;

		err_clk_unprepare:
		clk_disable_unprepare(wdt->clk);
		return ret;
		}

		static int qcom_wdt_remove(struct platform_device *pdev)
		{
		struct qcom_wdt *wdt = platform_get_drvdata(pdev);

		watchdog_unregister_device(&wdt->wdd);
		clk_disable_unprepare(wdt->clk);
		return 0;
		}

		static const struct of_device_id qcom_wdt_of_table[] = {
		{ .compatible = "qcom,kpss-wdt-msm8960", },
		{ .compatible = "qcom,kpss-wdt-apq8064", },
		{ .compatible = "qcom,kpss-wdt-ipq8064", },
		{ },
		};
		MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);

		static struct platform_driver qcom_watchdog_driver = {
		.probe = qcom_wdt_probe,
		.remove = qcom_wdt_remove,
		.driver = {
		.name = KBUILD_MODNAME,
		.of_match_table = qcom_wdt_of_table,
		},
		};
		module_platform_driver(qcom_watchdog_driver);

		MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
		MODULE_LICENSE("GPL v2");

Admin message