Commit 0fed2b5c authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits)
  sh: fix up sh7785lcr_32bit_defconfig.
  arch/sh/lib/strlen.S: Checkpatch cleanup
  sh: fix up sh7786 dmaengine build.
  sh: guard cookie consistency across termination in the DMA driver
  sh: prevent the DMA driver from unloading, while in use
  sh: fix Oops in the serial SCI driver
  sh: allow platforms to specify SD-card supported voltages
  mmc: let MFD's provide supported Vdd card voltages to tmio_mmc
  sh: disable SD-card write-protection detection on kfr2r09
  mfd: pass platform flags down to the tmio_mmc driver
  tmio: add a platform flag to disable card write-protection detection
  sh: Add SDHI DMA support to migor
  sh: Add SDHI DMA support to kfr2r09
  sh: Add SDHI DMA support to ms7724se
  sh: Add SDHI DMA support to ecovec
  mmc: add DMA support to tmio_mmc driver, when used on SuperH
  sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c
  mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell
  sh: add DMA slave definitions to sh7724
  sh: add DMA slaves for two SDHI controllers to sh7722
  ...
parents 0163916f 41ec7ebe

arch/sh/boards/mach-ecovec24/setup.c

+85 −2
Original line number Diff line number Diff line
@@ -11,6 +11,7 @@ 
#include <linux/init.h>

#include <linux/device.h>

#include <linux/platform_device.h>

#include <linux/mfd/sh_mobile_sdhi.h>

#include <linux/mtd/physmap.h>

#include <linux/gpio.h>

#include <linux/interrupt.h>
@@ -442,6 +443,8 @@ static void sdhi0_set_pwr(struct platform_device *pdev, int state) 
}



static struct sh_mobile_sdhi_info sdhi0_info = {

	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,

	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,

	.set_pwr	= sdhi0_set_pwr,

};
@@ -478,6 +481,8 @@ static void sdhi1_set_pwr(struct platform_device *pdev, int state) 
}



static struct sh_mobile_sdhi_info sdhi1_info = {

	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,

	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,

	.set_pwr	= sdhi1_set_pwr,

};
@@ -769,6 +774,51 @@ static struct platform_device irda_device = { 
	.resource       = irda_resources,

};



#include <media/ak881x.h>

#include <media/sh_vou.h>



struct ak881x_pdata ak881x_pdata = {

	.flags = AK881X_IF_MODE_SLAVE,

};



static struct i2c_board_info ak8813 = {

	I2C_BOARD_INFO("ak8813", 0x20),

	.platform_data = &ak881x_pdata,

};



struct sh_vou_pdata sh_vou_pdata = {

	.bus_fmt	= SH_VOU_BUS_8BIT,

	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,

	.board_info	= &ak8813,

	.i2c_adap	= 0,

	.module_name	= "ak881x",

};



static struct resource sh_vou_resources[] = {

	[0] = {

		.start  = 0xfe960000,

		.end    = 0xfe962043,

		.flags  = IORESOURCE_MEM,

	},

	[1] = {

		.start  = 55,

		.flags  = IORESOURCE_IRQ,

	},

};



static struct platform_device vou_device = {

	.name           = "sh-vou",

	.id		= -1,

	.num_resources  = ARRAY_SIZE(sh_vou_resources),

	.resource       = sh_vou_resources,

	.dev		= {

		.platform_data	= &sh_vou_pdata,

	},

	.archdata	= {

		.hwblk_id	= HWBLK_VOU,

	},

};



static struct platform_device *ecovec_devices[] __initdata = {

	&heartbeat_device,

	&nor_flash_device,
@@ -790,6 +840,7 @@ static struct platform_device *ecovec_devices[] __initdata = { 
	&camera_devices[2],

	&fsi_device,

	&irda_device,

	&vou_device,

};



#ifdef CONFIG_I2C
@@ -1179,6 +1230,38 @@ static int __init arch_setup(void) 
	i2c_register_board_info(1, i2c1_devices,

				ARRAY_SIZE(i2c1_devices));



	/* VOU */

	gpio_request(GPIO_FN_DV_D15, NULL);

	gpio_request(GPIO_FN_DV_D14, NULL);

	gpio_request(GPIO_FN_DV_D13, NULL);

	gpio_request(GPIO_FN_DV_D12, NULL);

	gpio_request(GPIO_FN_DV_D11, NULL);

	gpio_request(GPIO_FN_DV_D10, NULL);

	gpio_request(GPIO_FN_DV_D9, NULL);

	gpio_request(GPIO_FN_DV_D8, NULL);

	gpio_request(GPIO_FN_DV_CLKI, NULL);

	gpio_request(GPIO_FN_DV_CLK, NULL);

	gpio_request(GPIO_FN_DV_VSYNC, NULL);

	gpio_request(GPIO_FN_DV_HSYNC, NULL);



	/* AK8813 power / reset sequence */

	gpio_request(GPIO_PTG4, NULL);

	gpio_request(GPIO_PTU3, NULL);

	/* Reset */

	gpio_direction_output(GPIO_PTG4, 0);

	/* Power down */

	gpio_direction_output(GPIO_PTU3, 1);



	udelay(10);



	/* Power up, reset */

	gpio_set_value(GPIO_PTU3, 0);



	udelay(10);



	/* Remove reset */

	gpio_set_value(GPIO_PTG4, 1);



	return platform_add_devices(ecovec_devices,

				    ARRAY_SIZE(ecovec_devices));

}

arch/sh/boards/mach-kfr2r09/setup.c

+11 −0
Original line number Diff line number Diff line
@@ -10,6 +10,8 @@ 
#include <linux/init.h>

#include <linux/platform_device.h>

#include <linux/interrupt.h>

#include <linux/mfd/sh_mobile_sdhi.h>

#include <linux/mfd/tmio.h>

#include <linux/mtd/physmap.h>

#include <linux/mtd/onenand.h>

#include <linux/delay.h>
@@ -356,10 +358,19 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { 
	},

};



static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {

	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,

	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,

	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,

};



static struct platform_device kfr2r09_sh_sdhi0_device = {

	.name           = "sh_mobile_sdhi",

	.num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),

	.resource       = kfr2r09_sh_sdhi0_resources,

	.dev = {

		.platform_data	= &sh7724_sdhi0_data,

	},

	.archdata = {

		.hwblk_id = HWBLK_SDHI0,

	},

arch/sh/boards/mach-migor/setup.c

+9 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 
#include <linux/interrupt.h>

#include <linux/input.h>

#include <linux/input/sh_keysc.h>

#include <linux/mfd/sh_mobile_sdhi.h>

#include <linux/mtd/physmap.h>

#include <linux/mtd/nand.h>

#include <linux/i2c.h>
@@ -402,10 +403,18 @@ static struct resource sdhi_cn9_resources[] = { 
	},

};



static struct sh_mobile_sdhi_info sh7724_sdhi_data = {

	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,

	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,

};



static struct platform_device sdhi_cn9_device = {

	.name		= "sh_mobile_sdhi",

	.num_resources	= ARRAY_SIZE(sdhi_cn9_resources),

	.resource	= sdhi_cn9_resources,

	.dev = {

		.platform_data	= &sh7724_sdhi_data,

	},

	.archdata = {

		.hwblk_id = HWBLK_SDHI,

	},

arch/sh/boards/mach-se/7724/setup.c

+99 −8
Original line number Diff line number Diff line
@@ -14,6 +14,7 @@ 
#include <linux/device.h>

#include <linux/interrupt.h>

#include <linux/platform_device.h>

#include <linux/mfd/sh_mobile_sdhi.h>

#include <linux/mtd/physmap.h>

#include <linux/delay.h>

#include <linux/smc91x.h>
@@ -462,11 +463,19 @@ static struct resource sdhi0_cn7_resources[] = { 
	},

};



static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {

	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,

	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,

};



static struct platform_device sdhi0_cn7_device = {

	.name           = "sh_mobile_sdhi",

	.id		= 0,

	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),

	.resource       = sdhi0_cn7_resources,

	.dev = {

		.platform_data	= &sh7724_sdhi0_data,

	},

	.archdata = {

		.hwblk_id = HWBLK_SDHI0,

	},
@@ -485,11 +494,19 @@ static struct resource sdhi1_cn8_resources[] = { 
	},

};



static struct sh_mobile_sdhi_info sh7724_sdhi1_data = {

	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,

	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,

};



static struct platform_device sdhi1_cn8_device = {

	.name           = "sh_mobile_sdhi",

	.id		= 1,

	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),

	.resource       = sdhi1_cn8_resources,

	.dev = {

		.platform_data	= &sh7724_sdhi1_data,

	},

	.archdata = {

		.hwblk_id = HWBLK_SDHI1,

	},
@@ -515,6 +532,52 @@ static struct platform_device irda_device = { 
	.resource       = irda_resources,

};



#include <media/ak881x.h>

#include <media/sh_vou.h>



struct ak881x_pdata ak881x_pdata = {

	.flags = AK881X_IF_MODE_SLAVE,

};



static struct i2c_board_info ak8813 = {

	/* With open J18 jumper address is 0x21 */

	I2C_BOARD_INFO("ak8813", 0x20),

	.platform_data = &ak881x_pdata,

};



struct sh_vou_pdata sh_vou_pdata = {

	.bus_fmt	= SH_VOU_BUS_8BIT,

	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,

	.board_info	= &ak8813,

	.i2c_adap	= 0,

	.module_name	= "ak881x",

};



static struct resource sh_vou_resources[] = {

	[0] = {

		.start  = 0xfe960000,

		.end    = 0xfe962043,

		.flags  = IORESOURCE_MEM,

	},

	[1] = {

		.start  = 55,

		.flags  = IORESOURCE_IRQ,

	},

};



static struct platform_device vou_device = {

	.name           = "sh-vou",

	.id		= -1,

	.num_resources  = ARRAY_SIZE(sh_vou_resources),

	.resource       = sh_vou_resources,

	.dev		= {

		.platform_data	= &sh_vou_pdata,

	},

	.archdata	= {

		.hwblk_id	= HWBLK_VOU,

	},

};



static struct platform_device *ms7724se_devices[] __initdata = {

	&heartbeat_device,

	&smc91x_eth_device,
@@ -530,6 +593,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { 
	&sdhi0_cn7_device,

	&sdhi1_cn8_device,

	&irda_device,

	&vou_device,

};



/* I2C device */
@@ -614,6 +678,7 @@ static int __init devices_setup(void) 
{

	u16 sw = __raw_readw(SW4140); /* select camera, monitor */

	struct clk *clk;

	u16 fpga_out;



	/* register board specific self-refresh code */

	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
@@ -623,14 +688,26 @@ static int __init devices_setup(void) 
					&ms7724se_sdram_leave_start,

					&ms7724se_sdram_leave_end);

	/* Reset Release */

	__raw_writew(__raw_readw(FPGA_OUT) &

		  ~((1 << 1)  | /* LAN */

	fpga_out = __raw_readw(FPGA_OUT);

	/* bit4: NTSC_PDN, bit5: NTSC_RESET */

	fpga_out &= ~((1 << 1)  | /* LAN */

		      (1 << 4)  | /* AK8813 PDN */

		      (1 << 5)  | /* AK8813 RESET */

		      (1 << 6)  | /* VIDEO DAC */

		      (1 << 7)  | /* AK4643 */

		      (1 << 8)  | /* IrDA */

		      (1 << 12) | /* USB0 */

		    (1 << 14)), /* RMII */

		  FPGA_OUT);

		      (1 << 14)); /* RMII */

	__raw_writew(fpga_out | (1 << 4), FPGA_OUT);



	udelay(10);



	/* AK8813 RESET */

	__raw_writew(fpga_out | (1 << 5), FPGA_OUT);



	udelay(10);



	__raw_writew(fpga_out, FPGA_OUT);



	/* turn on USB clocks, use external clock */

	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
@@ -862,6 +939,20 @@ static int __init devices_setup(void) 
		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;

	}



	/* VOU */

	gpio_request(GPIO_FN_DV_D15, NULL);

	gpio_request(GPIO_FN_DV_D14, NULL);

	gpio_request(GPIO_FN_DV_D13, NULL);

	gpio_request(GPIO_FN_DV_D12, NULL);

	gpio_request(GPIO_FN_DV_D11, NULL);

	gpio_request(GPIO_FN_DV_D10, NULL);

	gpio_request(GPIO_FN_DV_D9, NULL);

	gpio_request(GPIO_FN_DV_D8, NULL);

	gpio_request(GPIO_FN_DV_CLKI, NULL);

	gpio_request(GPIO_FN_DV_CLK, NULL);

	gpio_request(GPIO_FN_DV_VSYNC, NULL);

	gpio_request(GPIO_FN_DV_HSYNC, NULL);



	return platform_add_devices(ms7724se_devices,

				    ARRAY_SIZE(ms7724se_devices));

}

arch/sh/configs/sh7785lcr_32bit_defconfig

+164 −109
Original line number Diff line number Diff line 
#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.34-rc5

# Tue May 18 17:22:09 2010

# Linux kernel version: 2.6.34

# Mon May 24 08:33:02 2010

#

CONFIG_SUPERH=y

CONFIG_SUPERH32=y
@@ -76,7 +76,7 @@ CONFIG_RCU_FANOUT=32 
# CONFIG_TREE_RCU_TRACE is not set

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_LOG_BUF_SHIFT=16

# CONFIG_CGROUPS is not set

# CONFIG_SYSFS_DEPRECATED_V2 is not set

# CONFIG_RELAY is not set
@@ -111,18 +111,17 @@ CONFIG_PERF_USE_VMALLOC=y 
#

CONFIG_PERF_EVENTS=y

CONFIG_PERF_COUNTERS=y

# CONFIG_DEBUG_PERF_USE_VMALLOC is not set

CONFIG_VM_EVENT_COUNTERS=y

CONFIG_PCI_QUIRKS=y

CONFIG_COMPAT_BRK=y

# CONFIG_COMPAT_BRK is not set

CONFIG_SLAB=y

# CONFIG_SLUB is not set

# CONFIG_SLOB is not set

CONFIG_PROFILING=y

CONFIG_TRACEPOINTS=y

CONFIG_OPROFILE=y

# CONFIG_OPROFILE is not set

CONFIG_HAVE_OPROFILE=y

CONFIG_KPROBES=y

CONFIG_KRETPROBES=y

# CONFIG_KPROBES is not set

CONFIG_HAVE_KPROBES=y

CONFIG_HAVE_KRETPROBES=y

CONFIG_HAVE_ARCH_TRACEHOOK=y
@@ -130,6 +129,7 @@ CONFIG_HAVE_DMA_ATTRS=y 
CONFIG_HAVE_CLK=y

CONFIG_HAVE_DMA_API_DEBUG=y

CONFIG_HAVE_HW_BREAKPOINT=y

CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y



#

# GCOV-based kernel profiling
@@ -243,8 +243,9 @@ CONFIG_PAGE_OFFSET=0x80000000 
CONFIG_FORCE_MAX_ZONEORDER=11

CONFIG_MEMORY_START=0x40000000

CONFIG_MEMORY_SIZE=0x20000000

CONFIG_29BIT=y

# CONFIG_PMB is not set

# CONFIG_29BIT is not set

CONFIG_32BIT=y

CONFIG_PMB=y

CONFIG_X2TLB=y

CONFIG_VSYSCALL=y

# CONFIG_NUMA is not set
@@ -262,9 +263,9 @@ CONFIG_PAGE_SIZE_4KB=y 
# CONFIG_PAGE_SIZE_8KB is not set

# CONFIG_PAGE_SIZE_16KB is not set

# CONFIG_PAGE_SIZE_64KB is not set

CONFIG_HUGETLB_PAGE_SIZE_64K=y

# CONFIG_HUGETLB_PAGE_SIZE_64K is not set

# CONFIG_HUGETLB_PAGE_SIZE_256K is not set

# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set

CONFIG_HUGETLB_PAGE_SIZE_1MB=y

# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set

# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set

# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
@@ -276,7 +277,7 @@ CONFIG_SPARSEMEM=y 
CONFIG_HAVE_MEMORY_PRESENT=y

CONFIG_SPARSEMEM_STATIC=y

# CONFIG_MEMORY_HOTPLUG is not set

CONFIG_SPLIT_PTLOCK_CPUS=4

CONFIG_SPLIT_PTLOCK_CPUS=999999

CONFIG_MIGRATION=y

# CONFIG_PHYS_ADDR_T_64BIT is not set

CONFIG_ZONE_DMA_FLAG=0
@@ -298,7 +299,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y 
# CONFIG_CPU_BIG_ENDIAN is not set

CONFIG_SH_FPU=y

CONFIG_SH_STORE_QUEUES=y

# CONFIG_SPECULATIVE_EXECUTION is not set

CONFIG_SPECULATIVE_EXECUTION=y

CONFIG_CPU_HAS_INTEVT=y

CONFIG_CPU_HAS_SR_RB=y

CONFIG_CPU_HAS_FPU=y
@@ -308,7 +309,7 @@ CONFIG_CPU_HAS_FPU=y 
#

# CONFIG_SH_HIGHLANDER is not set

CONFIG_SH_SH7785LCR=y

CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y

# CONFIG_SH_SH7785LCR_PT is not set



#

# Timer and clock configuration
@@ -371,7 +372,7 @@ CONFIG_SECCOMP=y 
# CONFIG_PREEMPT_VOLUNTARY is not set

CONFIG_PREEMPT=y

CONFIG_GUSA=y

# CONFIG_INTC_USERIMASK is not set

CONFIG_INTC_USERIMASK=y



#

# Boot options
@@ -389,6 +390,7 @@ CONFIG_PCI=y 
CONFIG_PCI_DOMAINS=y

# CONFIG_PCIEPORTBUS is not set

# CONFIG_ARCH_SUPPORTS_MSI is not set

CONFIG_PCI_DEBUG=y

# CONFIG_PCI_STUB is not set

# CONFIG_PCI_IOV is not set

# CONFIG_PCCARD is not set
@@ -465,6 +467,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" 
# CONFIG_RDS is not set

# CONFIG_TIPC is not set

# CONFIG_ATM is not set

# CONFIG_L2TP is not set

# CONFIG_BRIDGE is not set

# CONFIG_NET_DSA is not set

# CONFIG_VLAN_8021Q is not set
@@ -485,8 +488,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" 
# Network testing

#

# CONFIG_NET_PKTGEN is not set

# CONFIG_NET_TCPPROBE is not set

# CONFIG_NET_DROP_MONITOR is not set

# CONFIG_HAMRADIO is not set

# CONFIG_CAN is not set

# CONFIG_IRDA is not set
@@ -499,10 +500,19 @@ CONFIG_WIRELESS=y 
#

# CFG80211 needs to be enabled for MAC80211

#



#

# Some wireless drivers require a rate control algorithm

#

# CONFIG_WIMAX is not set

# CONFIG_RFKILL is not set

# CONFIG_NET_9P is not set



#

# CAIF Support

#

# CONFIG_CAIF is not set



#

# Device Drivers

#
@@ -514,7 +524,11 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" 
# CONFIG_DEVTMPFS is not set

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

# CONFIG_FW_LOADER is not set

CONFIG_FW_LOADER=y

CONFIG_FIRMWARE_IN_KERNEL=y

CONFIG_EXTRA_FIRMWARE=""

# CONFIG_DEBUG_DRIVER is not set

# CONFIG_DEBUG_DEVRES is not set

# CONFIG_SYS_HYPERVISOR is not set

# CONFIG_CONNECTOR is not set

CONFIG_MTD=y
@@ -537,6 +551,7 @@ CONFIG_MTD_BLOCK=y 
# CONFIG_INFTL is not set

# CONFIG_RFD_FTL is not set

# CONFIG_SSFDC is not set

# CONFIG_SM_FTL is not set

# CONFIG_MTD_OOPS is not set



#
@@ -668,7 +683,9 @@ CONFIG_ATA=y 
CONFIG_ATA_VERBOSE_ERROR=y

CONFIG_SATA_PMP=y

# CONFIG_SATA_AHCI is not set

# CONFIG_SATA_AHCI_PLATFORM is not set

# CONFIG_SATA_SIL24 is not set

# CONFIG_SATA_INIC162X is not set

CONFIG_ATA_SFF=y

# CONFIG_SATA_SVW is not set

# CONFIG_ATA_PIIX is not set
@@ -683,7 +700,6 @@ CONFIG_SATA_SIL=y 
# CONFIG_SATA_ULI is not set

# CONFIG_SATA_VIA is not set

# CONFIG_SATA_VITESSE is not set

# CONFIG_SATA_INIC162X is not set

# CONFIG_PATA_ALI is not set

# CONFIG_PATA_AMD is not set

# CONFIG_PATA_ARTOP is not set
@@ -753,8 +769,36 @@ CONFIG_NETDEVICES=y 
# CONFIG_TUN is not set

# CONFIG_VETH is not set

# CONFIG_ARCNET is not set

# CONFIG_NET_ETHERNET is not set

# CONFIG_PHYLIB is not set

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

# CONFIG_AX88796 is not set

# CONFIG_STNIC is not set

# CONFIG_HAPPYMEAL is not set

# CONFIG_SUNGEM is not set

# CONFIG_CASSINI is not set

CONFIG_NET_VENDOR_3COM=y

CONFIG_VORTEX=y

# CONFIG_TYPHOON is not set

# CONFIG_SMC91X is not set

# CONFIG_ETHOC is not set

# CONFIG_SMC911X is not set

# CONFIG_SMSC911X is not set

# CONFIG_DNET is not set

# CONFIG_NET_TULIP is not set

# CONFIG_HP100 is not set

# CONFIG_IBM_NEW_EMAC_ZMII is not set

# CONFIG_IBM_NEW_EMAC_RGMII is not set

# CONFIG_IBM_NEW_EMAC_TAH is not set

# CONFIG_IBM_NEW_EMAC_EMAC4 is not set

# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set

# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set

# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set

# CONFIG_NET_PCI is not set

# CONFIG_B44 is not set

# CONFIG_KS8842 is not set

# CONFIG_KS8851_MLL is not set

# CONFIG_ATL2 is not set

CONFIG_NETDEV_1000=y

# CONFIG_ACENIC is not set

# CONFIG_DL2K is not set
@@ -836,6 +880,7 @@ CONFIG_INPUT_KEYBOARD=y 
CONFIG_KEYBOARD_ATKBD=y

# CONFIG_QT2160 is not set

# CONFIG_KEYBOARD_LKKBD is not set

# CONFIG_KEYBOARD_TCA6416 is not set

# CONFIG_KEYBOARD_MAX7359 is not set

# CONFIG_KEYBOARD_NEWTON is not set

# CONFIG_KEYBOARD_OPENCORES is not set
@@ -884,6 +929,7 @@ CONFIG_HW_CONSOLE=y 
CONFIG_VT_HW_CONSOLE_BINDING=y

# CONFIG_DEVKMEM is not set

# CONFIG_SERIAL_NONSTANDARD is not set

# CONFIG_N_GSM is not set

# CONFIG_NOZOMI is not set



#
@@ -901,6 +947,8 @@ CONFIG_SERIAL_CORE=y 
CONFIG_SERIAL_CORE_CONSOLE=y

# CONFIG_SERIAL_JSM is not set

# CONFIG_SERIAL_TIMBERDALE is not set

# CONFIG_SERIAL_ALTERA_JTAGUART is not set

# CONFIG_SERIAL_ALTERA_UART is not set

CONFIG_UNIX98_PTYS=y

CONFIG_DEVPTS_MULTIPLE_INSTANCES=y

# CONFIG_LEGACY_PTYS is not set
@@ -1071,7 +1119,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y 
# CONFIG_FB_SIS is not set

# CONFIG_FB_VIA is not set

# CONFIG_FB_NEOMAGIC is not set

# CONFIG_FB_KYRO is not set

CONFIG_FB_KYRO=y

# CONFIG_FB_3DFX is not set

# CONFIG_FB_VOODOO1 is not set

# CONFIG_FB_VT8623 is not set
@@ -1097,15 +1145,15 @@ CONFIG_FB_SM501=y 
#

CONFIG_DUMMY_CONSOLE=y

CONFIG_FRAMEBUFFER_CONSOLE=y

# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set

CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y

# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set

# CONFIG_FONTS is not set

CONFIG_FONT_8x8=y

CONFIG_FONT_8x16=y

CONFIG_LOGO=y

# CONFIG_LOGO_LINUX_MONO is not set

# CONFIG_LOGO_LINUX_VGA16 is not set

# CONFIG_LOGO_LINUX_CLUT224 is not set

CONFIG_LOGO_LINUX_MONO=y

CONFIG_LOGO_LINUX_VGA16=y

CONFIG_LOGO_LINUX_CLUT224=y

CONFIG_LOGO_SUPERH_MONO=y

CONFIG_LOGO_SUPERH_VGA16=y

CONFIG_LOGO_SUPERH_CLUT224=y
@@ -1129,15 +1177,18 @@ CONFIG_SND_SEQ_HRTIMER_DEFAULT=y 
CONFIG_SND_DYNAMIC_MINORS=y

# CONFIG_SND_SUPPORT_OLD_API is not set

# CONFIG_SND_VERBOSE_PROCFS is not set

# CONFIG_SND_VERBOSE_PRINTK is not set

# CONFIG_SND_DEBUG is not set

CONFIG_SND_VERBOSE_PRINTK=y

CONFIG_SND_DEBUG=y

CONFIG_SND_DEBUG_VERBOSE=y

CONFIG_SND_VMASTER=y

CONFIG_SND_RAWMIDI_SEQ=y

CONFIG_SND_OPL3_LIB_SEQ=y

# CONFIG_SND_OPL4_LIB_SEQ is not set

# CONFIG_SND_SBAWE_SEQ is not set

# CONFIG_SND_EMU10K1_SEQ is not set

CONFIG_SND_EMU10K1_SEQ=y

CONFIG_SND_MPU401_UART=y

CONFIG_SND_OPL3_LIB=y

CONFIG_SND_AC97_CODEC=y

# CONFIG_SND_DRIVERS is not set

CONFIG_SND_PCI=y

# CONFIG_SND_AD1889 is not set
@@ -1172,7 +1223,7 @@ CONFIG_SND_CMIPCI=y 
# CONFIG_SND_INDIGODJ is not set

# CONFIG_SND_INDIGOIOX is not set

# CONFIG_SND_INDIGODJX is not set

# CONFIG_SND_EMU10K1 is not set

CONFIG_SND_EMU10K1=y

# CONFIG_SND_EMU10K1X is not set

# CONFIG_SND_ENS1370 is not set

# CONFIG_SND_ENS1371 is not set
@@ -1211,6 +1262,7 @@ CONFIG_SND_USB=y 
# CONFIG_SND_USB_CAIAQ is not set

# CONFIG_SND_SOC is not set

# CONFIG_SOUND_PRIME is not set

CONFIG_AC97_BUS=y

CONFIG_HID_SUPPORT=y

CONFIG_HID=y

# CONFIG_HIDRAW is not set
@@ -1226,44 +1278,42 @@ CONFIG_USB_HID=y 
# Special HID drivers

#

# CONFIG_HID_3M_PCT is not set

CONFIG_HID_A4TECH=m

CONFIG_HID_APPLE=m

CONFIG_HID_BELKIN=m

CONFIG_HID_CHERRY=m

CONFIG_HID_CHICONY=m

CONFIG_HID_CYPRESS=m

CONFIG_HID_DRAGONRISE=m

# CONFIG_DRAGONRISE_FF is not set

CONFIG_HID_EZKEY=m

CONFIG_HID_KYE=m

CONFIG_HID_GYRATION=m

CONFIG_HID_TWINHAN=m

CONFIG_HID_KENSINGTON=m

CONFIG_HID_LOGITECH=m

# CONFIG_LOGITECH_FF is not set

# CONFIG_LOGIRUMBLEPAD2_FF is not set

# CONFIG_LOGIG940_FF is not set

CONFIG_HID_MICROSOFT=m

# CONFIG_HID_A4TECH is not set

# CONFIG_HID_APPLE is not set

# CONFIG_HID_BELKIN is not set

# CONFIG_HID_CANDO is not set

# CONFIG_HID_CHERRY is not set

# CONFIG_HID_CHICONY is not set

# CONFIG_HID_PRODIKEYS is not set

# CONFIG_HID_CYPRESS is not set

# CONFIG_HID_DRAGONRISE is not set

# CONFIG_HID_EGALAX is not set

# CONFIG_HID_EZKEY is not set

# CONFIG_HID_KYE is not set

# CONFIG_HID_GYRATION is not set

# CONFIG_HID_TWINHAN is not set

# CONFIG_HID_KENSINGTON is not set

# CONFIG_HID_LOGITECH is not set

# CONFIG_HID_MICROSOFT is not set

# CONFIG_HID_MOSART is not set

CONFIG_HID_MONTEREY=m

CONFIG_HID_NTRIG=m

# CONFIG_HID_MONTEREY is not set

# CONFIG_HID_NTRIG is not set

# CONFIG_HID_ORTEK is not set

CONFIG_HID_PANTHERLORD=m

# CONFIG_PANTHERLORD_FF is not set

CONFIG_HID_PETALYNX=m

# CONFIG_HID_PANTHERLORD is not set

# CONFIG_HID_PETALYNX is not set

# CONFIG_HID_PICOLCD is not set

# CONFIG_HID_QUANTA is not set

CONFIG_HID_SAMSUNG=m

CONFIG_HID_SONY=m

# CONFIG_HID_ROCCAT_KONE is not set

# CONFIG_HID_SAMSUNG is not set

# CONFIG_HID_SONY is not set

# CONFIG_HID_STANTUM is not set

CONFIG_HID_SUNPLUS=m

CONFIG_HID_GREENASIA=m

# CONFIG_GREENASIA_FF is not set

CONFIG_HID_SMARTJOYPLUS=m

# CONFIG_SMARTJOYPLUS_FF is not set

CONFIG_HID_TOPSEED=m

# CONFIG_HID_SUNPLUS is not set

# CONFIG_HID_GREENASIA is not set

# CONFIG_HID_SMARTJOYPLUS is not set

# CONFIG_HID_TOPSEED is not set

# CONFIG_HID_THRUSTMASTER is not set

CONFIG_HID_ZEROPLUS=m

# CONFIG_ZEROPLUS_FF is not set

# CONFIG_HID_ZEROPLUS is not set

# CONFIG_HID_ZYDACRON is not set

CONFIG_USB_SUPPORT=y

CONFIG_USB_ARCH_HAS_HCD=y

CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1276,9 +1326,8 @@ CONFIG_USB=y 
# Miscellaneous USB options

#

# CONFIG_USB_DEVICEFS is not set

CONFIG_USB_DEVICE_CLASS=y

# CONFIG_USB_DEVICE_CLASS is not set

# CONFIG_USB_DYNAMIC_MINORS is not set

# CONFIG_USB_OTG is not set

# CONFIG_USB_OTG_WHITELIST is not set

# CONFIG_USB_OTG_BLACKLIST_HUB is not set

# CONFIG_USB_MON is not set
@@ -1290,9 +1339,7 @@ CONFIG_USB_DEVICE_CLASS=y 
#

# CONFIG_USB_C67X00_HCD is not set

# CONFIG_USB_XHCI_HCD is not set

CONFIG_USB_EHCI_HCD=m

# CONFIG_USB_EHCI_ROOT_HUB_TT is not set

# CONFIG_USB_EHCI_TT_NEWSCHED is not set

# CONFIG_USB_EHCI_HCD is not set

# CONFIG_USB_OXU210HP_HCD is not set

# CONFIG_USB_ISP116X_HCD is not set

# CONFIG_USB_ISP1760_HCD is not set
@@ -1361,7 +1408,6 @@ CONFIG_USB_STORAGE=y 
# CONFIG_USB_IDMOUSE is not set

# CONFIG_USB_FTDI_ELAN is not set

# CONFIG_USB_APPLEDISPLAY is not set

# CONFIG_USB_SISUSBVGA is not set

# CONFIG_USB_LD is not set

# CONFIG_USB_TRANCEVIBRATOR is not set

# CONFIG_USB_IOWARRIOR is not set
@@ -1464,6 +1510,7 @@ CONFIG_DMADEVICES=y 
#

# DMA Devices

#

# CONFIG_TIMB_DMA is not set

# CONFIG_AUXDISPLAY is not set

CONFIG_UIO=m

# CONFIG_UIO_CIF is not set
@@ -1473,10 +1520,6 @@ CONFIG_UIO=m 
# CONFIG_UIO_SERCOS3 is not set

# CONFIG_UIO_PCI_GENERIC is not set

# CONFIG_UIO_NETX is not set



#

# TI VLYNQ

#

# CONFIG_STAGING is not set



#
@@ -1653,63 +1696,75 @@ CONFIG_MAGIC_SYSRQ=y 
# CONFIG_UNUSED_SYMBOLS is not set

CONFIG_DEBUG_FS=y

# CONFIG_HEADERS_CHECK is not set

# CONFIG_DEBUG_KERNEL is not set

CONFIG_DEBUG_KERNEL=y

# CONFIG_DEBUG_SHIRQ is not set

CONFIG_DETECT_SOFTLOCKUP=y

# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set

CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0

CONFIG_DETECT_HUNG_TASK=y

# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set

CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0

CONFIG_SCHED_DEBUG=y

CONFIG_SCHEDSTATS=y

CONFIG_TRACE_IRQFLAGS=y

# CONFIG_TIMER_STATS is not set

# CONFIG_DEBUG_OBJECTS is not set

# CONFIG_DEBUG_SLAB is not set

CONFIG_DEBUG_KMEMLEAK=y

CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400

# CONFIG_DEBUG_KMEMLEAK_TEST is not set

CONFIG_DEBUG_PREEMPT=y

# CONFIG_DEBUG_RT_MUTEXES is not set

# CONFIG_RT_MUTEX_TESTER is not set

CONFIG_DEBUG_SPINLOCK=y

CONFIG_DEBUG_MUTEXES=y

# CONFIG_DEBUG_LOCK_ALLOC is not set

# CONFIG_PROVE_LOCKING is not set

# CONFIG_LOCK_STAT is not set

CONFIG_DEBUG_SPINLOCK_SLEEP=y

# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set

CONFIG_STACKTRACE=y

# CONFIG_DEBUG_KOBJECT is not set

CONFIG_DEBUG_BUGVERBOSE=y

CONFIG_DEBUG_INFO=y

# CONFIG_DEBUG_VM is not set

# CONFIG_DEBUG_WRITECOUNT is not set

# CONFIG_DEBUG_MEMORY_INIT is not set

# CONFIG_DEBUG_LIST is not set

# CONFIG_DEBUG_SG is not set

# CONFIG_DEBUG_NOTIFIERS is not set

# CONFIG_DEBUG_CREDENTIALS is not set

CONFIG_FRAME_POINTER=y

# CONFIG_RCU_TORTURE_TEST is not set

# CONFIG_RCU_CPU_STALL_DETECTOR is not set

# CONFIG_BACKTRACE_SELF_TEST is not set

# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set

# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set

# CONFIG_LKDTM is not set

# CONFIG_FAULT_INJECTION is not set

CONFIG_LATENCYTOP=y

CONFIG_SYSCTL_SYSCALL_CHECK=y

CONFIG_NOP_TRACER=y

CONFIG_HAVE_FTRACE_NMI_ENTER=y

# CONFIG_PAGE_POISONING is not set

CONFIG_HAVE_FUNCTION_TRACER=y

CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y

CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y

CONFIG_HAVE_DYNAMIC_FTRACE=y

CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y

CONFIG_HAVE_SYSCALL_TRACEPOINTS=y

CONFIG_TRACER_MAX_TRACE=y

CONFIG_RING_BUFFER=y

CONFIG_FTRACE_NMI_ENTER=y

CONFIG_EVENT_TRACING=y

CONFIG_CONTEXT_SWITCH_TRACER=y

CONFIG_RING_BUFFER_ALLOW_SWAP=y

CONFIG_TRACING=y

CONFIG_GENERIC_TRACER=y

CONFIG_TRACING_SUPPORT=y

CONFIG_FTRACE=y

CONFIG_FUNCTION_TRACER=y

CONFIG_FUNCTION_GRAPH_TRACER=y

CONFIG_IRQSOFF_TRACER=y

# CONFIG_PREEMPT_TRACER is not set

CONFIG_SCHED_TRACER=y

# CONFIG_FTRACE_SYSCALLS is not set

# CONFIG_BOOT_TRACER is not set

CONFIG_BRANCH_PROFILE_NONE=y

# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set

# CONFIG_PROFILE_ALL_BRANCHES is not set

# CONFIG_KSYM_TRACER is not set

CONFIG_STACK_TRACER=y

CONFIG_KMEMTRACE=y

CONFIG_WORKQUEUE_TRACER=y

# CONFIG_BLK_DEV_IO_TRACE is not set

CONFIG_DYNAMIC_FTRACE=y

# CONFIG_FUNCTION_PROFILER is not set

CONFIG_FTRACE_MCOUNT_RECORD=y

# CONFIG_FTRACE_STARTUP_TEST is not set

# CONFIG_RING_BUFFER_BENCHMARK is not set

# CONFIG_FTRACE is not set

# CONFIG_DYNAMIC_DEBUG is not set

# CONFIG_DMA_API_DEBUG is not set

# CONFIG_ATOMIC64_SELFTEST is not set

# CONFIG_SAMPLES is not set

CONFIG_HAVE_ARCH_KGDB=y

# CONFIG_KGDB is not set

# CONFIG_SH_STANDARD_BIOS is not set

CONFIG_DWARF_UNWINDER=y

CONFIG_MCOUNT=y

# CONFIG_STACK_DEBUG is not set

# CONFIG_DEBUG_STACK_USAGE is not set

# CONFIG_4KSTACKS is not set

CONFIG_DUMP_CODE=y

# CONFIG_DWARF_UNWINDER is not set

# CONFIG_SH_NO_BSS_INIT is not set



#

# Security options
@@ -1820,7 +1875,7 @@ CONFIG_CRYPTO_DES=y 
# CONFIG_CRYPTO_ANSI_CPRNG is not set

# CONFIG_CRYPTO_HW is not set

# CONFIG_VIRTUALIZATION is not set

CONFIG_BINARY_PRINTF=y

# CONFIG_BINARY_PRINTF is not set



#

# Library routines

CRA Git | Maintained and supported by SUSTech CRA and CCSE