Commit 0ef9059d authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'dsa-LAN9303' 



Juergen Borleis says:

====================
net: dsa: add SMSC/Microchip LAN9303 three port ethernet switch driver

The LAN9303 is a three port 10/100 ethernet switch with integrated phys
for the two external ethernet ports. The third port is an RMII/MII
interface to a host master network interface (e.g. fixed link).

While the LAN9303 device itself supports offload packet processing, this
driver does not make use of it yet. This driver just configures the device
to provide two separate network interfaces (which is the default state of
a DSA device).

Please note: the "MDIO managed mode" driver part isn't tested yet. I have
used and tested the "I2C managed mode" only.

Changes in v6:

- fix support to use the driver as a module (core, i2c and mdio)
- license info added in all parts of the driver (for module support)

Changes in v5:

- add missing include file to 'net/dsa/tag_lan9303.c'

Changes in v4:

- rebased on net-next, 'net/dsa/tag_lan9303.c' adapted to changed API

Changes in v3:

- 'ds_to_lan9303()' removed
- special PHY reg MII_LAN911X_SPECIAL_CONTROL_STATUS mapping removed
- compatible strings for I2C and MDIO are now different
- MDIO-managed-mode devicetree binding added (still compile time tested only)

Changes in v2:

- code moved to 'drivers/net/dsa'
- timeouts in completion wait loops
- macros instead of various magic numbers
- development code removed
- devicetree property names changed
- devicetree example adapted
- tried to avoid to mix 'switching' and 'forwarding'...

Comments are welcome.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 8dc7d11f dc700583

Documentation/devicetree/bindings/net/dsa/lan9303.txt

0 → 100644
+105 −0
Original line number Diff line number Diff line 
SMSC/MicroChip LAN9303 three port ethernet switch

-------------------------------------------------



Required properties:



- compatible: should be

  - "smsc,lan9303-i2c" for I2C managed mode

    or

  - "smsc,lan9303-mdio" for mdio managed mode



Optional properties:



- reset-gpios: GPIO to be used to reset the whole device

- reset-duration: reset duration in milliseconds, defaults to 200 ms



Subnodes:



The integrated switch subnode should be specified according to the binding

described in dsa/dsa.txt. The CPU port of this switch is always port 0.



Note: always use 'reg = <0/1/2>;' for the three DSA ports, even if the device is

configured to use 1/2/3 instead. This hardware configuration will be

auto-detected and mapped accordingly.



Example:



I2C managed mode:



	master: masterdevice@X {

		status = "okay";



		fixed-link { /* RMII fixed link to LAN9303 */

			speed = <100>;

			full-duplex;

		};

	};



	switch: switch@a {

		compatible = "smsc,lan9303-i2c";

		reg = <0xa>;

		status = "okay";

		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;

		reset-duration = <200>;



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 { /* RMII fixed link to master */

				reg = <0>;

				label = "cpu";

				ethernet = <&master>;

			};



			port@1 { /* external port 1 */

				reg = <1>;

				label = "lan1;

			};



			port@2 { /* external port 2 */

				reg = <2>;

				label = "lan2";

			};

		};

	};



MDIO managed mode:



	master: masterdevice@X {

		status = "okay";

		phy-handle = <&switch>;



		mdio {

			#address-cells = <1>;

			#size-cells = <0>;



			switch: switch-phy@0 {

				compatible = "smsc,lan9303-mdio";

				reg = <0>;

				reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;

				reset-duration = <100>;



				ports {

					#address-cells = <1>;

					#size-cells = <0>;



					port@0 {

						reg = <0>;

						label = "cpu";

						ethernet = <&master>;

					};



					port@1 { /* external port 1 */

						reg = <1>;

						label = "lan1;

					};



					port@2 { /* external port 2 */

						reg = <2>;

						label = "lan2";

					};

				};

			};

		};

	};

drivers/net/dsa/Kconfig

+24 −0
Original line number Diff line number Diff line
@@ -50,4 +50,28 @@ config NET_DSA_MT7530 
	  This enables support for the Mediatek MT7530 Ethernet switch

	  chip.



config NET_DSA_SMSC_LAN9303

	tristate

	select NET_DSA_TAG_LAN9303

	---help---

	  This enables support for the SMSC/Microchip LAN9303 3 port ethernet

	  switch chips.



config NET_DSA_SMSC_LAN9303_I2C

	tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"

	depends on NET_DSA

	select NET_DSA_SMSC_LAN9303

	select REGMAP_I2C

	---help---

	  Enable access functions if the SMSC/Microchip LAN9303 is configured

	  for I2C managed mode.



config NET_DSA_SMSC_LAN9303_MDIO

	tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"

	depends on NET_DSA

	select NET_DSA_SMSC_LAN9303

	---help---

	  Enable access functions if the SMSC/Microchip LAN9303 is configured

	  for MDIO managed mode.



endmenu

drivers/net/dsa/Makefile

+3 −0
Original line number Diff line number Diff line
@@ -3,6 +3,9 @@ obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o 
bcm-sf2-objs			:= bcm_sf2.o bcm_sf2_cfp.o

obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o

obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o

obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o

obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o

obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o

obj-y				+= b53/

obj-y				+= mv88e6xxx/

obj-$(CONFIG_NET_DSA_LOOP)	+= dsa_loop.o dsa_loop_bdinfo.o

CRA Git | Maintained and supported by SUSTech CRA and CCSE