Commit 0eb0ce0a authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'spi-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi 

Pull spi fixes from Mark Brown:
 "A bunch of small, device specific things here plus a DT bindings fix
  for the new validatable YAML binding format.

  The most notable thing is the fix for GPIO chip selects which fixes a
  corner case in updates of that code to modern APIs, unfortunately due
  to a historical mess the code around GPIO support is obscure, fragile
  and an ABI which makes and attempt to improve the situation painful"

* tag 'spi-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Add support for Intel Tiger Lake
  spi: bcm2835: Fix 3-wire mode if DMA is enabled
  spi: pxa2xx: Balance runtime PM enable/disable on error
  spi: gpio: Add SPI_MASTER_GPIO_SS flag
  spi: spi-fsl-qspi: change i.MX7D RX FIFO size
  spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg
parents df9edcba a4127952

Documentation/devicetree/bindings/spi/spi-controller.yaml

+0 −1
Original line number Diff line number Diff line
@@ -73,7 +73,6 @@ patternProperties: 
          Compatible of the SPI device.



      reg:

        maxItems: 1

        minimum: 0

        maximum: 256

        description:

drivers/spi/spi-bcm2835.c

+2 −1
Original line number Diff line number Diff line
@@ -834,7 +834,8 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, 
	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);



	/* handle all the 3-wire mode */

	if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))

	if (spi->mode & SPI_3WIRE && tfr->rx_buf &&

	    tfr->rx_buf != ctlr->dummy_rx)

		cs |= BCM2835_SPI_CS_REN;

	else

		cs &= ~BCM2835_SPI_CS_REN;

drivers/spi/spi-fsl-qspi.c

+1 −1
Original line number Diff line number Diff line
@@ -206,7 +206,7 @@ static const struct fsl_qspi_devtype_data imx6sx_data = { 
};



static const struct fsl_qspi_devtype_data imx7d_data = {

	.rxfifo = SZ_512,

	.rxfifo = SZ_128,

	.txfifo = SZ_512,

	.ahb_buf_size = SZ_1K,

	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK,

drivers/spi/spi-gpio.c

+6 −0
Original line number Diff line number Diff line
@@ -410,6 +410,12 @@ static int spi_gpio_probe(struct platform_device *pdev) 


	bb = &spi_gpio->bitbang;

	bb->master = master;

	/*

	 * There is some additional business, apart from driving the CS GPIO

	 * line, that we need to do on selection. This makes the local

	 * callback for chipselect always get called.

	 */

	master->flags |= SPI_MASTER_GPIO_SS;

	bb->chipselect = spi_gpio_chipselect;

	bb->set_line_direction = spi_gpio_set_direction;

drivers/spi/spi-pxa2xx.c

+12 −2
Original line number Diff line number Diff line
@@ -1457,6 +1457,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { 
	{ PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP },

	/* TGL-LP */

	{ PCI_VDEVICE(INTEL, 0xa0aa), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0xa0ab), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0xa0de), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0xa0df), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0xa0fb), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0xa0fd), LPSS_CNL_SSP },

	{ PCI_VDEVICE(INTEL, 0xa0fe), LPSS_CNL_SSP },

	{ },

};
@@ -1831,14 +1839,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) 
	status = devm_spi_register_controller(&pdev->dev, controller);

	if (status != 0) {

		dev_err(&pdev->dev, "problem registering spi controller\n");

		goto out_error_clock_enabled;

		goto out_error_pm_runtime_enabled;

	}



	return status;



out_error_clock_enabled:

out_error_pm_runtime_enabled:

	pm_runtime_put_noidle(&pdev->dev);

	pm_runtime_disable(&pdev->dev);



out_error_clock_enabled:

	clk_disable_unprepare(ssp->clk);



out_error_dma_irq_alloc:

CRA Git | Maintained and supported by SUSTech CRA and CCSE