Commit 0e950fa6 authored by Marek Belisko's avatar Marek Belisko Committed by Linus Torvalds
Browse files

mmc-omap: add support for 16-bit and 32-bit registers 



The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver.  To
resolve this, a bit shift is performed on base register addresses, either
by 1 or 2 bits depending on the CPU in use.  This yields the correct
registers for each CPU.

Signed-off-by: default avatarMarek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: default avatarCory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Ben Dooks <ben@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent ca2afb6d

drivers/mmc/host/omap.c

+33 −29
Original line number Diff line number Diff line
@@ -39,30 +39,30 @@ 
#include <plat/fpga.h>



#define	OMAP_MMC_REG_CMD	0x00

#define	OMAP_MMC_REG_ARGL	0x04

#define	OMAP_MMC_REG_ARGH	0x08

#define	OMAP_MMC_REG_CON	0x0c

#define	OMAP_MMC_REG_STAT	0x10

#define	OMAP_MMC_REG_IE		0x14

#define	OMAP_MMC_REG_CTO	0x18

#define	OMAP_MMC_REG_DTO	0x1c

#define	OMAP_MMC_REG_DATA	0x20

#define	OMAP_MMC_REG_BLEN	0x24

#define	OMAP_MMC_REG_NBLK	0x28

#define	OMAP_MMC_REG_BUF	0x2c

#define OMAP_MMC_REG_SDIO	0x34

#define	OMAP_MMC_REG_REV	0x3c

#define	OMAP_MMC_REG_RSP0	0x40

#define	OMAP_MMC_REG_RSP1	0x44

#define	OMAP_MMC_REG_RSP2	0x48

#define	OMAP_MMC_REG_RSP3	0x4c

#define	OMAP_MMC_REG_RSP4	0x50

#define	OMAP_MMC_REG_RSP5	0x54

#define	OMAP_MMC_REG_RSP6	0x58

#define	OMAP_MMC_REG_RSP7	0x5c

#define	OMAP_MMC_REG_IOSR	0x60

#define	OMAP_MMC_REG_SYSC	0x64

#define	OMAP_MMC_REG_SYSS	0x68

#define	OMAP_MMC_REG_ARGL	0x01

#define	OMAP_MMC_REG_ARGH	0x02

#define	OMAP_MMC_REG_CON	0x03

#define	OMAP_MMC_REG_STAT	0x04

#define	OMAP_MMC_REG_IE		0x05

#define	OMAP_MMC_REG_CTO	0x06

#define	OMAP_MMC_REG_DTO	0x07

#define	OMAP_MMC_REG_DATA	0x08

#define	OMAP_MMC_REG_BLEN	0x09

#define	OMAP_MMC_REG_NBLK	0x0a

#define	OMAP_MMC_REG_BUF	0x0b

#define	OMAP_MMC_REG_SDIO	0x0d

#define	OMAP_MMC_REG_REV	0x0f

#define	OMAP_MMC_REG_RSP0	0x10

#define	OMAP_MMC_REG_RSP1	0x11

#define	OMAP_MMC_REG_RSP2	0x12

#define	OMAP_MMC_REG_RSP3	0x13

#define	OMAP_MMC_REG_RSP4	0x14

#define	OMAP_MMC_REG_RSP5	0x15

#define	OMAP_MMC_REG_RSP6	0x16

#define	OMAP_MMC_REG_RSP7	0x17

#define	OMAP_MMC_REG_IOSR	0x18

#define	OMAP_MMC_REG_SYSC	0x19

#define	OMAP_MMC_REG_SYSS	0x1a



#define	OMAP_MMC_STAT_CARD_ERR		(1 << 14)

#define	OMAP_MMC_STAT_CARD_IRQ		(1 << 13)
@@ -78,8 +78,9 @@ 
#define	OMAP_MMC_STAT_CARD_BUSY		(1 <<  2)

#define	OMAP_MMC_STAT_END_OF_CMD	(1 <<  0)



#define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)

#define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)

#define OMAP_MMC_REG(host, reg)		(OMAP_MMC_REG_##reg << (host)->reg_shift)

#define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))

#define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))



/*

 * Command types
@@ -133,6 +134,7 @@ struct mmc_omap_host { 
	int			irq;

	unsigned char		bus_mode;

	unsigned char		hw_bus_mode;

	unsigned int		reg_shift;



	struct work_struct	cmd_abort_work;

	unsigned		abort:1;
@@ -680,9 +682,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) 
	host->data->bytes_xfered += n;



	if (write) {

		__raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);

		__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);

	} else {

		__raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);

		__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);

	}

}
@@ -900,7 +902,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) 
	int dst_port = 0;

	int sync_dev = 0;



	data_addr = host->phys_base + OMAP_MMC_REG_DATA;

	data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);

	frame = data->blksz;

	count = sg_dma_len(sg);
@@ -1493,6 +1495,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev) 
		}

	}



	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);



	return 0;



err_plat_cleanup:

CRA Git | Maintained and supported by SUSTech CRA and CCSE