Commit 0d45062c authored by Vladimir Vid's avatar Vladimir Vid Committed by Gregory CLEMENT
Browse files

arm64: dts: marvell: Add device tree for uDPU board 



This adds initial support for micro-DPU (uDPU) board which is based on
Armada-3720 SoC.  micro-DPU is the single-port FTTdp distribution point
unit made by Methode Electronics which offers complete modularity with
replaceable SFP modules both for uplink and downlink (G.hn over
twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable).

On-board features:
- 512 MiB DDR3
- 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC
- USB 2.0 Type-C connector
- 4GB eMMC
- ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)

Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Luis Torres <luis.torres@methode.com>
Cc: Scott Roberts <scott.roberts@telus.com>
Cc: Paul Arola <paul.arola@telus.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarVladimir Vid <vladimir.vid@sartura.hr>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@bootlin.com>
parent c54932d4

arch/arm64/boot/dts/marvell/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -2,6 +2,7 @@ 
# Mvebu SoC Family

dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb

dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb

dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb

dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb

dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb

dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb

arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts

0 → 100644
+162 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/*

 * Device tree for the uDPU board.

 * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)

 * Copyright (C) 2016 Marvell

 * Copyright (C) 2019 Methode Electronics

 * Copyright (C) 2019 Telus

 *

 * Vladimir Vid <vladimir.vid@sartura.hr>

 */



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include "armada-372x.dtsi"



/ {

	model = "Methode uDPU Board";

	compatible = "methode,udpu", "marvell,armada3720";



	chosen {

		stdout-path = "serial0:115200n8";

	};



	memory@0 {

		device_type = "memory";

		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;

	};



	leds {

		pinctrl-names = "default";

		compatible = "gpio-leds";



		power1 {

			label = "udpu:green:power";

			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;

		};



		power2 {

			label = "udpu:red:power";

			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;

		};



		network1 {

			label = "udpu:green:network";

			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;

		};



		network2 {

			label = "udpu:red:network";

			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;

		};



		alarm1 {

			label = "udpu:green:alarm";

			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;

		};



		alarm2 {

			label = "udpu:red:alarm";

			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;

		};

	};



	sfp_eth0: sfp-eth0 {

		compatible = "sff,sfp";

		i2c-bus = <&i2c0>;

		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;

		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;

		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;

		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;

	};



	sfp_eth1: sfp-eth1 {

		compatible = "sff,sfp";

		i2c-bus = <&i2c1>;

		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;

		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;

		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;

		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;

	};

};



&sdhci0 {

	status = "okay";

	bus-width = <8>;

	mmc-ddr-1_8v;

	mmc-hs400-1_8v;

	marvell,pad-type = "fixed-1-8v";

	non-removable;

	no-sd;

	no-sdio;

};



&spi0 {

	status = "okay";

	pinctrl-names = "default";

	pinctrl-0 = <&spi_quad_pins>;



	m25p80@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		spi-max-frequency = <54000000>;



		partitions {

			compatible = "fixed-partitions";

			#address-cells = <1>;

			#size-cells = <1>;

			/* only bootloader is located on the SPI */

			partition@0 {

				label = "uboot";

				reg = <0 0x400000>;

			};

		};

	};

};



&i2c0 {

	status = "okay";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins>;

};



&i2c1 {

	status = "okay";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins>;



	lm75@48 {

		status = "okay";

		compatible = "lm75";

		reg = <0x48>;

	};



	lm75@49 {

		status = "okay";

		compatible = "lm75";

		reg = <0x49>;

	};

};



&eth0 {

	phy-mode = "sgmii";

	status = "okay";

	managed = "in-band-status";

	sfp = <&sfp_eth0>;

};



&eth1 {

	phy-mode = "sgmii";

	status = "okay";

	managed = "in-band-status";

	sfp = <&sfp_eth1>;

};



&usb3 {

	status = "okay";

};



&uart0 {

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE