Commit 0d365753 authored by David VomLehn's avatar David VomLehn Committed by Ralf Baechle
Browse files

MIPS: PowerTV: Separate PowerTV USB support from non-USB code 



Separate USB code into a file separate from asic/asic_devices.

Separating the USB code from everything else in asic/asic_devices.c goes
a long way toward reducing the use of that file as a dumping ground for
everything that didn't seem to fit anywhere else.

Signed-off-by: default avatarDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Cc: greg@kroah.com
Cc: linux-usb@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1522/


Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 5089ca9d

arch/mips/include/asm/mach-powertv/asic.h

+13 −4
Original line number Diff line number Diff line
@@ -20,6 +20,7 @@ 
#define _ASM_MACH_POWERTV_ASIC_H



#include <linux/ioport.h>

#include <linux/platform_device.h>

#include <asm/mach-powertv/asic_regs.h>



#define DVR_CAPABLE     (1<<0)
@@ -71,16 +72,24 @@ extern int platform_supports_ffs(void); 
extern int platform_supports_pcie(void);

extern int platform_supports_display(void);

extern void configure_platform(void);

extern void platform_configure_usb_ehci(void);

extern void platform_unconfigure_usb_ehci(void);

extern void platform_configure_usb_ohci(void);

extern void platform_unconfigure_usb_ohci(void);



/* Platform Resources */

#define ASIC_RESOURCE_GET_EXISTS 1

extern struct resource *asic_resource_get(const char *name);

extern void platform_release_memory(void *baddr, int size);



/* USB configuration */

struct usb_hcd;			/* Forward reference */

extern void platform_configure_usb_ehci(void);

extern void platform_unconfigure_usb_ehci(void);

extern void platform_configure_usb_ohci(void);

extern void platform_unconfigure_usb_ohci(void);



/* Resource for ASIC registers */

extern struct resource asic_resource;

extern int platform_usb_devices_init(struct platform_device **echi_dev,

	struct platform_device **ohci_dev);



/* Reboot Cause */

extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);

extern void set_locked_reboot_cause(char code, unsigned int data,

arch/mips/include/asm/mach-powertv/asic_regs.h

+1 −0
Original line number Diff line number Diff line
@@ -101,6 +101,7 @@ static inline void register_map_virtualize(struct register_map *map) 
}



extern struct register_map _asic_register_map;

extern unsigned long asic_phy_base;



/*

 * Macros to interface to registers through their ioremapped address

arch/mips/powertv/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -26,4 +26,6 @@ 
obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \

	asic/ pci/



obj-$(CONFIG_USB) += powertv-usb.o



EXTRA_CFLAGS += -Wall

arch/mips/powertv/asic/asic_devices.c

+13 −225
Original line number Diff line number Diff line
@@ -33,7 +33,6 @@ 
#include <linux/mm.h>

#include <linux/platform_device.h>

#include <linux/module.h>

#include <linux/gfp.h>

#include <asm/page.h>

#include <linux/swap.h>

#include <linux/highmem.h>
@@ -68,7 +67,6 @@ unsigned long asic_phy_base; 
unsigned long asic_base;

EXPORT_SYMBOL(asic_base);			/* Exported for testing */

struct resource *gp_resources;

static bool usb_configured;



/*

 * Don't recommend to use it directly, it is usually used by kernel internally.
@@ -90,102 +88,20 @@ struct resource asic_resource = { 
	.flags = IORESOURCE_MEM,

};



/*

 *

 * USB Host Resource Definition

 *

 */



static struct resource ehci_resources[] = {

	{

		.parent = &asic_resource,

		.start  = 0,

		.end    = 0xff,

		.flags  = IORESOURCE_MEM,

	},

	{

		.start  = irq_usbehci,

		.end    = irq_usbehci,

		.flags  = IORESOURCE_IRQ,

	},

};



static u64 ehci_dmamask = DMA_BIT_MASK(32);



static struct platform_device ehci_device = {

	.name = "powertv-ehci",

	.id = 0,

	.num_resources = 2,

	.resource = ehci_resources,

	.dev = {

		.dma_mask = &ehci_dmamask,

		.coherent_dma_mask = DMA_BIT_MASK(32),

	},

};



static struct resource ohci_resources[] = {

	{

		.parent = &asic_resource,

		.start  = 0,

		.end    = 0xff,

		.flags  = IORESOURCE_MEM,

	},

	{

		.start  = irq_usbohci,

		.end    = irq_usbohci,

		.flags  = IORESOURCE_IRQ,

	},

};



static u64 ohci_dmamask = DMA_BIT_MASK(32);



static struct platform_device ohci_device = {

	.name = "powertv-ohci",

	.id = 0,

	.num_resources = 2,

	.resource = ohci_resources,

	.dev = {

		.dma_mask = &ohci_dmamask,

		.coherent_dma_mask = DMA_BIT_MASK(32),

	},

};



static struct platform_device *platform_devices[] = {

	&ehci_device,

	&ohci_device,

};



/*

 *

 * Platform Configuration and Device Initialization

 *

 */

static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)

{

	int en_prg, byp, pwr, nsb, val;

	int sout;



	sout = 1;

	en_prg = 1;

	byp = 0;

	nsb = 1;

	pwr = 1;



	val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |

		(nsb<<1) | (disable_div_by_3<<5));



	asic_write(val, fs432x4b4_usb_ctl);

	asic_write(val | (en_prg<<4), fs432x4b4_usb_ctl);

	asic_write(val | (en_prg<<4) | pwr, fs432x4b4_usb_ctl);

}



/*

 * Allow override of bootloader-specified model

 * Returns zero on success, a negative errno value on failure.  This parameter

 * allows overriding of the bootloader-specified model.

 */

static char __initdata cmdline[COMMAND_LINE_SIZE];



#define	FORCEFAMILY_PARAM	"forcefamily"



/*

 * check_forcefamily - check for, and parse, forcefamily command line parameter

 * @forced_family:	Pointer to two-character array in which to store the

 *			value of the forcedfamily parameter, if any.

 */

static __init int check_forcefamily(unsigned char forced_family[2])

{

	const char *p;
@@ -225,14 +141,10 @@ static __init int check_forcefamily(unsigned char forced_family[2]) 
 */

static __init noinline void platform_set_family(void)

{

#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))



	unsigned char forced_family[2];

	unsigned short bootldr_family;



	check_forcefamily(forced_family);



	if (forced_family[0] != '\0' && forced_family[1] != '\0')

	if (check_forcefamily(forced_family) == 0)

		bootldr_family = BOOTLDRFAMILY(forced_family[0],

			forced_family[1]);

	else {
@@ -297,25 +209,10 @@ unsigned int platform_get_family(void) 
}

EXPORT_SYMBOL(platform_get_family);



/*

 * \brief usb_eye_configure() for optimizing the USB eye on Calliope.

 *

 * \param     unsigned int value saved to the register.

 *

 * \return    none

 *

 */

static void __init usb_eye_configure(unsigned int value)

{

	asic_write(asic_read(crt_spare) | value, crt_spare);

}



/*

 * platform_get_asic - determine the ASIC type.

 *

 * \param     none

 *

 * \return    ASIC type; ASIC_UNKNOWN if none

 * Returns the ASIC type, or ASIC_UNKNOWN if unknown

 *

 */

enum asic_type platform_get_asic(void)
@@ -325,93 +222,10 @@ enum asic_type platform_get_asic(void) 
EXPORT_SYMBOL(platform_get_asic);



/*

 * platform_configure_usb - usb configuration based on platform type.

 * @bcm1_usb2_ctl:	value for the BCM1_USB2_CTL register, which is

 *			quirky

 */

static void __init platform_configure_usb(void)

{

	u32 bcm1_usb2_ctl;



	if (usb_configured)

		return;



	switch (asic) {

	case ASIC_ZEUS:

	case ASIC_CRONUS:

	case ASIC_CRONUSLITE:

		fs_update(0x0000, 0x11, 0x02, 0);

		bcm1_usb2_ctl = 0x803;

		break;



	case ASIC_CALLIOPE:

		fs_update(0x0000, 0x11, 0x02, 1);



		switch (platform_family) {

		case FAMILY_1500VZE:

			break;



		case FAMILY_1500VZF:

			usb_eye_configure(0x003c0000);

			break;



		default:

			usb_eye_configure(0x00300000);

			break;

		}



		bcm1_usb2_ctl = 0x803;

		break;



	default:

		pr_err("Unknown ASIC type: %d\n", asic);

		break;

	}



	/* turn on USB power */

	asic_write(0, usb2_strap);

	/* Enable all OHCI interrupts */

	asic_write(bcm1_usb2_ctl, usb2_control);

	/* USB2_STBUS_OBC store32/load32 */

	asic_write(3, usb2_stbus_obc);

	/* USB2_STBUS_MESS_SIZE 2 packets */

	asic_write(1, usb2_stbus_mess_size);

	/* USB2_STBUS_CHUNK_SIZE 2 packets */

	asic_write(1, usb2_stbus_chunk_size);



	usb_configured = true;

}



/*

 * Set up the USB EHCI interface

 */

void platform_configure_usb_ehci()

{

	platform_configure_usb();

}



/*

 * Set up the USB OHCI interface

 */

void platform_configure_usb_ohci()

{

	platform_configure_usb();

}



/*

 * Shut the USB EHCI interface down--currently a NOP

 */

void platform_unconfigure_usb_ehci()

{

}



/*

 * Shut the USB OHCI interface down--currently a NOP

 * set_register_map - set ASIC register configuration

 * @phys_base:	Physical address of the base of the ASIC registers

 * @map:	Description of key ASIC registers

 */

void platform_unconfigure_usb_ohci()

{

}



static void __init set_register_map(unsigned long phys_base,

	const struct register_map *map)

{
@@ -560,34 +374,8 @@ void __init configure_platform(void) 
	}

}



/**

 * platform_devices_init - sets up USB device resourse.

 */

static int __init platform_devices_init(void)

{

	pr_notice("%s: ----- Initializing USB resources -----\n", __func__);



	asic_resource.start = asic_phy_base;

	asic_resource.end += asic_resource.start;



	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);

	ehci_resources[0].end += ehci_resources[0].start;



	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);

	ohci_resources[0].end += ohci_resources[0].start;



	set_io_port_base(0);



	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));



	return 0;

}



arch_initcall(platform_devices_init);



/*

 *

 * BOOTMEM ALLOCATION

 * RESOURCE ALLOCATION

 *

 */

/*

arch/mips/powertv/powertv-usb.c

0 → 100644
+403 −0
Original line number Diff line number Diff line 
/*

 *				powertv-usb.c

 *

 * Description:  ASIC-specific USB device setup and shutdown

 *

 * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.

 * Copyright (C) 2009 Cisco Systems, Inc.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

 *

 * Author:       Ken Eppinett

 *               David Schleef <ds@schleef.org>

 *

 * NOTE: The bootloader allocates persistent memory at an address which is

 * 16 MiB below the end of the highest address in KSEG0. All fixed

 * address memory reservations must avoid this region.

 */



#include <linux/kernel.h>

#include <linux/ioport.h>

#include <linux/platform_device.h>

#include <asm/mach-powertv/asic.h>

#include <asm/mach-powertv/interrupts.h>



/* misc_clk_ctl1 values */

#define MCC1_30MHZ_POWERUP_SELECT	(1 << 14)

#define MCC1_DIV9			(1 << 13)

#define MCC1_ETHMIPS_POWERUP_SELECT	(1 << 11)

#define MCC1_USB_POWERUP_SELECT		(1 << 1)

#define MCC1_CLOCK108_POWERUP_SELECT	(1 << 0)



/* Possible values for clock select */

#define MCC1_USB_CLOCK_HIGH_Z		(0 << 4)

#define MCC1_USB_CLOCK_48MHZ		(1 << 4)

#define MCC1_USB_CLOCK_24MHZ		(2 << 4)

#define MCC1_USB_CLOCK_6MHZ		(3 << 4)



#define MCC1_CONFIG	(MCC1_30MHZ_POWERUP_SELECT |		\

			 MCC1_DIV9 |				\

			 MCC1_ETHMIPS_POWERUP_SELECT |		\

			 MCC1_USB_POWERUP_SELECT |		\

			 MCC1_CLOCK108_POWERUP_SELECT)



/* misc_clk_ctl2 values */

#define MCC2_GMII_GCLK_TO_PAD		(1 << 31)

#define MCC2_ETHER125_0_CLOCK_SELECT	(1 << 29)

#define MCC2_RMII_0_CLOCK_SELECT	(1 << 28)

#define MCC2_GMII_TX0_CLOCK_SELECT	(1 << 27)

#define MCC2_GMII_RX0_CLOCK_SELECT	(1 << 26)

#define MCC2_ETHER125_1_CLOCK_SELECT	(1 << 24)

#define MCC2_RMII_1_CLOCK_SELECT	(1 << 23)

#define MCC2_GMII_TX1_CLOCK_SELECT	(1 << 22)

#define MCC2_GMII_RX1_CLOCK_SELECT	(1 << 21)

#define MCC2_ETHER125_2_CLOCK_SELECT	(1 << 19)

#define MCC2_RMII_2_CLOCK_SELECT	(1 << 18)

#define MCC2_GMII_TX2_CLOCK_SELECT	(1 << 17)

#define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)



#define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\

				 MCC2_ETHER125_0_CLOCK_SELECT |	\

				 MCC2_RMII_0_CLOCK_SELECT |	\

				 MCC2_GMII_TX0_CLOCK_SELECT |	\

				 MCC2_GMII_RX0_CLOCK_SELECT |	\

				 MCC2_ETHER125_1_CLOCK_SELECT |	\

				 MCC2_RMII_1_CLOCK_SELECT |	\

				 MCC2_GMII_TX1_CLOCK_SELECT |	\

				 MCC2_GMII_RX1_CLOCK_SELECT |	\

				 MCC2_ETHER125_2_CLOCK_SELECT |	\

				 MCC2_RMII_2_CLOCK_SELECT |	\

				 MCC2_GMII_TX2_CLOCK_SELECT |	\

				 MCC2_GMII_RX2_CLOCK_SELECT)



/* misc_clk_ctl2 definitions for Gaia */

#define FSX4A_REF_SELECT		(1 << 16)

#define FSX4B_REF_SELECT		(1 << 17)

#define FSX4C_REF_SELECT		(1 << 18)

#define DDR_PLL_REF_SELECT		(1 << 19)

#define MIPS_PLL_REF_SELECT		(1 << 20)



/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */

#define QAM_FS_SDIV_SHIFT		29

#define QAM_FS_MD_SHIFT			24

#define QAM_FS_MD_MASK			0x1f	/* Cut down to 5 bits */

#define QAM_FS_PE_SHIFT			8



#define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)

#define QAM_FS_ENABLE_PROGRAM			(1 << 4)

#define	QAM_FS_ENABLE_OUTPUT			(1 << 3)

#define	QAM_FS_SELECT_TEST_BYPASS		(1 << 2)

#define	QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)

#define QAM_FS_CHOOSE_FS			(1 << 0)



/* Definitions for fs432x4a_ctl register */

#define QAM_FS_NSDIV_54MHZ			(1 << 2)



/* Definitions for bcm1_usb2_ctl register */

#define BCM1_USB2_CTL_BISTOK				(1 << 11)

#define BCM1_USB2_CTL_PORT2_SHIFT_JK			(1 << 7)

#define BCM1_USB2_CTL_PORT1_SHIFT_JK			(1 << 6)

#define BCM1_USB2_CTL_PORT2_FAST_EDGE			(1 << 5)

#define BCM1_USB2_CTL_PORT1_FAST_EDGE			(1 << 4)

#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH		(1 << 1)

#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH	(1 << 0)



/* Definitions for crt_spare register */

#define CRT_SPARE_PORT2_SHIFT_JK			(1 << 21)

#define CRT_SPARE_PORT1_SHIFT_JK			(1 << 20)

#define CRT_SPARE_PORT2_FAST_EDGE			(1 << 19)

#define CRT_SPARE_PORT1_FAST_EDGE			(1 << 18)

#define CRT_SPARE_DIVIDE_BY_9_FROM_432			(1 << 17)

#define CRT_SPARE_USB_DIVIDE_BY_9			(1 << 16)



/* Definitions for usb2_stbus_obc register */

#define USB_STBUS_OBC_STORE32_LOAD32			0x3



/* Definitions for usb2_stbus_mess_size register */

#define USB2_STBUS_MESS_SIZE_2				0x1	/* 2 packets */



/* Definitions for usb2_stbus_chunk_size register */

#define USB2_STBUS_CHUNK_SIZE_2				0x1	/* 2 packets */



/* Definitions for usb2_strap register */

#define USB2_STRAP_HFREQ_SELECT				0x1



/*

 * USB Host Resource Definition

 */



static struct resource ehci_resources[] = {

	{

		.parent = &asic_resource,

		.start  = 0,

		.end    = 0xff,

		.flags  = IORESOURCE_MEM,

	},

	{

		.start  = irq_usbehci,

		.end    = irq_usbehci,

		.flags  = IORESOURCE_IRQ,

	},

};



static u64 ehci_dmamask = 0xffffffffULL;



static struct platform_device ehci_device = {

	.name = "powertv-ehci",

	.id = 0,

	.num_resources = 2,

	.resource = ehci_resources,

	.dev = {

		.dma_mask = &ehci_dmamask,

		.coherent_dma_mask = 0xffffffff,

	},

};



static struct resource ohci_resources[] = {

	{

		.parent = &asic_resource,

		.start  = 0,

		.end    = 0xff,

		.flags  = IORESOURCE_MEM,

	},

	{

		.start  = irq_usbohci,

		.end    = irq_usbohci,

		.flags  = IORESOURCE_IRQ,

	},

};



static u64 ohci_dmamask = 0xffffffffULL;



static struct platform_device ohci_device = {

	.name = "powertv-ohci",

	.id = 0,

	.num_resources = 2,

	.resource = ohci_resources,

	.dev = {

		.dma_mask = &ohci_dmamask,

		.coherent_dma_mask = 0xffffffff,

	},

};



static unsigned usb_users;

static DEFINE_SPINLOCK(usb_regs_lock);



/*

 *

 * fs_update - set frequency synthesizer for USB

 * @pe_bits		Phase tap setting

 * @md_bits		Coarse selector bus for algorithm of phase tap

 * @sdiv_bits		Output divider setting

 * @disable_div_by_3	Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero

 * @standby		Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero

 *

 * QAM frequency selection code, which affects the frequency at which USB

 * runs. The frequency is calculated as:

 *                             2^15 * ndiv * Fin

 * Fout = ------------------------------------------------------------

 *        (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))

 * where:

 * Fin		54 MHz

 * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16

 * sdiv		1 << (sdiv_bits + 1)

 * ipe		Same as pe_bits

 * md		A five-bit, two's-complement integer (range [-16, 15]), which

 *		is the lower 5 bits of md_bits.

 */

static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,

	u32 disable_div_by_3, u32 standby)

{

	u32 val;



	val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |

		((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |

		(pe_bits << QAM_FS_PE_SHIFT) |

		QAM_FS_ENABLE_OUTPUT |

		standby |

		disable_div_by_3);

	asic_write(val, fs432x4b4_usb_ctl);

	asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);

	asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,

		fs432x4b4_usb_ctl);

}



/*

 * usb_eye_configure - for optimizing the shape USB eye waveform

 * @set:	Bits to set in the register

 * @clear:	Bits to clear in the register; each bit with a one will

 *		be set in the register, zero bits will not be modified

 */

static void usb_eye_configure(u32 set, u32 clear)

{

	u32 old;



	old = asic_read(crt_spare);

	old |= set;

	old &= ~clear;

	asic_write(old, crt_spare);

}



/*

 * platform_configure_usb - usb configuration based on platform type.

 */

static void platform_configure_usb(void)

{

	u32 bcm1_usb2_ctl_value;

	enum asic_type asic_type;

	unsigned long flags;



	spin_lock_irqsave(&usb_regs_lock, flags);

	usb_users++;



	if (usb_users != 1) {

		spin_unlock_irqrestore(&usb_regs_lock, flags);

		return;

	}



	asic_type = platform_get_asic();



	switch (asic_type) {

	case ASIC_ZEUS:

		fs_update(0x0000, -15, 0x02, 0, 0);

		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |

			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;

		break;



	case ASIC_CRONUS:

	case ASIC_CRONUSLITE:

		usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);

		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,

			QAM_FS_DISABLE_DIGITAL_STANDBY);

		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |

			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;

		break;



	case ASIC_CALLIOPE:

		fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,

			QAM_FS_DISABLE_DIGITAL_STANDBY);



		switch (platform_get_family()) {

		case FAMILY_1500VZE:

			break;



		case FAMILY_1500VZF:

			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |

				CRT_SPARE_PORT1_SHIFT_JK |

				CRT_SPARE_PORT2_FAST_EDGE |

				CRT_SPARE_PORT1_FAST_EDGE, 0);

			break;



		default:

			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |

				CRT_SPARE_PORT1_SHIFT_JK, 0);

			break;

		}



		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |

			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |

			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;

		break;



	case ASIC_GAIA:

		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,

			QAM_FS_DISABLE_DIGITAL_STANDBY);

		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |

			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |

			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;

		break;



	default:

		pr_err("Unknown ASIC type: %d\n", asic_type);

		bcm1_usb2_ctl_value = 0;

		break;

	}



	/* turn on USB power */

	asic_write(0, usb2_strap);

	/* Enable all OHCI interrupts */

	asic_write(bcm1_usb2_ctl_value, usb2_control);

	/* usb2_stbus_obc store32/load32 */

	asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);

	/* usb2_stbus_mess_size 2 packets */

	asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);

	/* usb2_stbus_chunk_size 2 packets */

	asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);

	spin_unlock_irqrestore(&usb_regs_lock, flags);

}



static void platform_unconfigure_usb(void)

{

	unsigned long flags;



	spin_lock_irqsave(&usb_regs_lock, flags);

	usb_users--;

	if (usb_users == 0)

		asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);

	spin_unlock_irqrestore(&usb_regs_lock, flags);

}



/*

 * Set up the USB EHCI interface

 */

void platform_configure_usb_ehci()

{

	platform_configure_usb();

}

EXPORT_SYMBOL(platform_configure_usb_ehci);



/*

 * Set up the USB OHCI interface

 */

void platform_configure_usb_ohci()

{

	platform_configure_usb();

}

EXPORT_SYMBOL(platform_configure_usb_ohci);



/*

 * Shut the USB EHCI interface down

 */

void platform_unconfigure_usb_ehci()

{

	platform_unconfigure_usb();

}

EXPORT_SYMBOL(platform_unconfigure_usb_ehci);



/*

 * Shut the USB OHCI interface down

 */

void platform_unconfigure_usb_ohci()

{

	platform_unconfigure_usb();

}

EXPORT_SYMBOL(platform_unconfigure_usb_ohci);



/**

 * platform_devices_init - sets up USB device resourse.

 */

int __init platform_usb_devices_init(struct platform_device **ehci_dev,

	struct platform_device **ohci_dev)

{

	*ehci_dev = &ehci_device;

	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);

	ehci_resources[0].end += ehci_resources[0].start;



	*ohci_dev = &ohci_device;

	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);

	ohci_resources[0].end += ohci_resources[0].start;



	return 0;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE