rtw88: configure firmware after HCI started (0b8dc6ab) · Commits · 戴 / test

After firmware has been downloaded, driver should send some information to it through H2C commands. Those H2C commands are transmitted through TX path. But before HCI has been started, the TX path is not working completely. Such as PCI interfaces, the interrupts are not enabled, hence TX interrupts will not be issued after H2C skb has been DMAed to the device. And the H2C skbs will not be released until the device is powered off. Signed-off-by:

Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:

Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtw88/mac.c

+0 −3

Original line number	Diff line number	Diff line
		@@ -707,9 +707,6 @@ int rtw_download_firmware(struct rtw_dev rtwdev, struct rtw_fw_state fw)
		rtwdev->h2c.last_box_num = 0;
		rtwdev->h2c.seq = 0;

		rtw_fw_send_general_info(rtwdev);
		rtw_fw_send_phydm_info(rtwdev);

		rtw_flag_set(rtwdev, RTW_FLAG_FW_RUNNING);

		return 0;

drivers/net/wireless/realtek/rtw88/main.c

+4 −0

Original line number	Diff line number	Diff line
		@@ -704,6 +704,10 @@ static int rtw_power_on(struct rtw_dev *rtwdev)
		goto err_off;
		}

		/* send H2C after HCI has started */
		rtw_fw_send_general_info(rtwdev);
		rtw_fw_send_phydm_info(rtwdev);

		wifi_only = !rtwdev->efuse.btcoex;
		rtw_coex_power_on_setting(rtwdev);
		rtw_coex_init_hw_config(rtwdev, wifi_only);

Admin message