Commit 0b37e9e8 authored by Alexandre Belloni's avatar Alexandre Belloni
Browse files

ARM: at91: debug: use DEBUG_UART_VIRT 



AT91 still uses an offset (0x0100 0000) from the physical address to map
the debug UART. This is unfortunate as for some platforms (sama5d3 and
earlier), it ends up in the PCI zone and PCI is enabled in multi_v7.
Switch to DEBUG_UART_VIRT to solve that.

Tested on sama5d3 and 9g20.

Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
parent 1a695a90

arch/arm/Kconfig.debug

+6 −5
Original line number Diff line number Diff line
@@ -117,15 +117,15 @@ choice 
		  their output to the serial port on atmel devices.



		  SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT

		  rm9200, 9260/9g20,   0xfffff200        0xfefff200       DBGU

		  rm9200, 9260/9g20,   0xfffff200        0xf8fff200       DBGU

		  9261/9g10, 9rl

		  9263, 9g45, sama5d3  0xffffee00        0xfeffee00       DBGU

		  9263, 9g45, sama5d3  0xffffee00        0xf8ffee00       DBGU

		  sama5d4              0xfc00c000        0xfb00c000       USART3

		  sama5d4              0xfc069000        0xfb069000       DBGU

		  sama5d2              0xf8020000        0xf7020000       UART1



		  Please adjust DEBUG_UART_PHYS configuration options based on

		  your needs.

		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_VIRT

		  configuration options based on your needs.



	config DEBUG_BCM2835

		bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -1627,7 +1627,8 @@ config DEBUG_UART_VIRT 
		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \

		DEBUG_S3C64XX_UART || \

		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \

		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0

		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \

		DEBUG_AT91_UART



config DEBUG_UART_8250_SHIFT

	int "Register offset shift for the 8250 debug UART"

arch/arm/include/debug/at91.S

+1 −9
Original line number Diff line number Diff line
@@ -9,14 +9,6 @@ 
 *

*/



#ifdef CONFIG_MMU

#define AT91_IO_P2V(x) ((x) - 0x01000000)

#else

#define AT91_IO_P2V(x) (x)

#endif



#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)



#define AT91_DBGU_SR		(0x14)	/* Status Register */

#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */

#define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
@@ -24,7 +16,7 @@ 


	.macro	addruart, rp, rv, tmp

	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)

	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)

	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)

	.endm



	.macro	senduart,rd,rx

CRA Git | Maintained and supported by SUSTech CRA and CCSE