Commit 0aa2a15a authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown
Browse files

ASoC: jz4740: Improve build test coverage 



Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected.
This should improve the build test coverage. There is one small piece of
platform dependent code in the jz4740-i2s driver. It uses the DMA request type
constants which are defined in a platform specific header. We can solve this by
moving them from the platform specific header to the I2S driver.

Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 218e18a3

arch/mips/include/asm/mach-jz4740/dma.h

+0 −2
Original line number Diff line number Diff line
@@ -22,8 +22,6 @@ enum jz4740_dma_request_type { 
	JZ4740_DMA_TYPE_UART_RECEIVE	= 21,

	JZ4740_DMA_TYPE_SPI_TRANSMIT	= 22,

	JZ4740_DMA_TYPE_SPI_RECEIVE	= 23,

	JZ4740_DMA_TYPE_AIC_TRANSMIT	= 24,

	JZ4740_DMA_TYPE_AIC_RECEIVE	= 25,

	JZ4740_DMA_TYPE_MMC_TRANSMIT	= 26,

	JZ4740_DMA_TYPE_MMC_RECEIVE	= 27,

	JZ4740_DMA_TYPE_TCU		= 28,

sound/soc/jz4740/Kconfig

+8 −3
Original line number Diff line number Diff line 
config SND_JZ4740_SOC

	tristate "SoC Audio for Ingenic JZ4740 SoC"

	depends on MACH_JZ4740 && SND_SOC

	depends on MACH_JZ4740 || COMPILE_TEST

	select SND_SOC_GENERIC_DMAENGINE_PCM

	help

	  Say Y or M if you want to add support for codecs attached to

	  the JZ4740 I2S interface. You will also need to select the audio

	  interfaces to support below.



if SND_JZ4740_SOC



config SND_JZ4740_SOC_I2S

	depends on SND_JZ4740_SOC

	tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC"

	depends on HAS_IOMEM

	help

	  Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740

	  based boards.



config SND_JZ4740_SOC_QI_LB60

	tristate "SoC Audio support for Qi LB60"

	depends on SND_JZ4740_SOC && JZ4740_QI_LB60

	depends on HAS_IOMEM

	depends on JZ4740_QI_LB60 || COMPILE_TEST

	select SND_JZ4740_SOC_I2S

    select SND_SOC_JZ4740_CODEC

	help

	  Say Y if you want to add support for ASoC audio on the Qi LB60 board

	  a.k.a Qi Ben NanoNote.



endif

sound/soc/jz4740/jz4740-i2s.c

+3 −2
Original line number Diff line number Diff line
@@ -31,10 +31,11 @@ 
#include <sound/initval.h>

#include <sound/dmaengine_pcm.h>



#include <asm/mach-jz4740/dma.h>



#include "jz4740-i2s.h"



#define JZ4740_DMA_TYPE_AIC_TRANSMIT 24

#define JZ4740_DMA_TYPE_AIC_RECEIVE 25



#define JZ_REG_AIC_CONF		0x00

#define JZ_REG_AIC_CTRL		0x04

#define JZ_REG_AIC_I2S_FMT	0x10

CRA Git | Maintained and supported by SUSTech CRA and CCSE