Commit 0a68ec3d authored by Ji-Ze Hong (Peter Hong)'s avatar Ji-Ze Hong (Peter Hong) Committed by Johan Hovold
Browse files

USB: serial: f81232: set F81534A serial port with RS232 mode 



The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device
and the serial ports are default disabled. Each port contains max 3 pins
GPIO and the 3 pins are default pull high with input mode.

When the serial port had activated (running probe()), we'll transform the
3 pins from GPIO function publicly to control Tranceiver privately use.
We'll default set to 0/0/1 for control transceiver to RS232 mode.

Otherwise, If the serial port is not active, the 3 pins is in GPIO mode
and controlled by global GPIO device with VID/PID: 2c42/16f8.

Signed-off-by: default avatarJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parent 11301d41

drivers/usb/serial/f81232.c

+23 −1
Original line number Diff line number Diff line
@@ -92,6 +92,15 @@ MODULE_DEVICE_TABLE(usb, combined_id_table); 
#define F81534A_TRIGGER_MULTIPLE_4X	BIT(3)

#define F81534A_FIFO_128BYTE		(BIT(1) | BIT(0))



/* Serial port self GPIO control, 2bytes [control&output data][input data] */

#define F81534A_GPIO_REG		0x10e

#define F81534A_GPIO_MODE2_DIR		BIT(6) /* 1: input, 0: output */

#define F81534A_GPIO_MODE1_DIR		BIT(5)

#define F81534A_GPIO_MODE0_DIR		BIT(4)

#define F81534A_GPIO_MODE2_OUTPUT	BIT(2)

#define F81534A_GPIO_MODE1_OUTPUT	BIT(1)

#define F81534A_GPIO_MODE0_OUTPUT	BIT(0)



struct f81232_private {

	struct mutex lock;

	u8 modem_control;
@@ -859,6 +868,19 @@ static int f81232_port_probe(struct usb_serial_port *port) 
	return 0;

}



static int f81534a_port_probe(struct usb_serial_port *port)

{

	int status;



	/* tri-state with pull-high, default RS232 Mode */

	status = f81232_set_register(port, F81534A_GPIO_REG,

					F81534A_GPIO_MODE2_DIR);

	if (status)

		return status;



	return f81232_port_probe(port);

}



static int f81232_suspend(struct usb_serial *serial, pm_message_t message)

{

	struct usb_serial_port *port = serial->port[0];
@@ -942,7 +964,7 @@ static struct usb_serial_driver f81534a_device = { 
	.tx_empty =		f81232_tx_empty,

	.process_read_urb =	f81534a_process_read_urb,

	.read_int_callback =	f81232_read_int_callback,

	.port_probe =		f81232_port_probe,

	.port_probe =		f81534a_port_probe,

	.suspend =		f81232_suspend,

	.resume =		f81232_resume,

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE