+0
−3
+12
−2
+52
−12
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
When streaming in Nagle mode, we try to bundle small messages from user as many as possible if there is one outstanding buffer, i.e. not ACK-ed by the receiving side, which helps boost up the overall throughput. So, the algorithm's effectiveness really depends on when Nagle ACK comes or what the specific network latency (RTT) is, compared to the user's message sending rate. In a bad case, the user's sending rate is low or the network latency is small, there will not be many bundles, so making a Nagle ACK or waiting for it is not meaningful. For example: a user sends its messages every 100ms and the RTT is 50ms, then for each messages, we require one Nagle ACK but then there is only one user message sent without any bundles. In a better case, even if we have a few bundles (e.g. the RTT = 300ms), but now the user sends messages in medium size, then there will not be any difference at all, that says 3 x 1000-byte data messages if bundled will still result in 3 bundles with MTU = 1500. When Nagle is ineffective, the delay in user message sending is clearly wasted instead of sending directly. Besides, adding Nagle ACKs will consume some processor load on both the sending and receiving sides. This commit adds a test on the effectiveness of the Nagle algorithm for an individual connection in the network on which it actually runs. Particularly, upon receipt of a Nagle ACK we will compare the number of bundles in the backlog queue to the number of user messages which would be sent directly without Nagle. If the ratio is good (e.g. >= 2), Nagle mode will be kept for further message sending. Otherwise, we will leave Nagle and put a 'penalty' on the connection, so it will have to spend more 'one-way' messages before being able to re-enter Nagle. In addition, the 'ack-required' bit is only set when really needed that the number of Nagle ACKs will be reduced during Nagle mode. Testing with benchmark showed that with the patch, there was not much difference in throughput for small messages since the tool continuously sends messages without a break, so Nagle would still take in effect. Acked-by:Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
CRA Git | Maintained and supported by SUSTech CRA and CCSE