Commit 0a072a24 authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD Committed by Nicolas Ferre
Browse files

at91: USB-A9G20 C01 & C11 board support 



Add support for Calao USB-A9G20 boards. It will be integrated in
existing support for board of same form factor using at91sam9260 or
at91sam9263.

Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 6939fd49

arch/arm/mach-at91/Kconfig

+8 −0
Original line number Diff line number Diff line
@@ -386,6 +386,14 @@ config MACH_GSIA18S 
	  This enables support for the GS_IA18_S board

	  produced by GeoSIG Ltd company. This is an internet accelerograph.

	  <http://www.geosig.com>



config MACH_USB_A9G20

	bool "CALAO USB-A9G20"

	depends on ARCH_AT91SAM9G20

	help

	  Select this if you are using a Calao Systems USB-A9G20.

	  <http://www.calao-systems.com>



endif



if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)

arch/arm/mach-at91/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -68,6 +68,7 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o 
obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o

obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o

obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o

obj-$(CONFIG_MACH_USB_A9G20)	+= board-usb-a926x.o



# AT91SAM9260/AT91SAM9G20 board-specific support

obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o

arch/arm/mach-at91/board-usb-a926x.c

+119 −26
Original line number Diff line number Diff line
@@ -4,6 +4,7 @@ 
 *  Copyright (C) 2005 SAN People

 *  Copyright (C) 2007 Atmel Corporation.

 *  Copyright (C) 2007 Calao-systems

 *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by
@@ -28,6 +29,7 @@ 
#include <linux/spi/spi.h>

#include <linux/gpio_keys.h>

#include <linux/input.h>

#include <linux/spi/mmc_spi.h>



#include <asm/setup.h>

#include <asm/mach-types.h>
@@ -74,18 +76,42 @@ static struct at91_udc_data __initdata ek_udc_data = { 
	.pullup_pin	= 0,		/* pull-up driven by UDC */

};



void ek_add_device_udc(void)

static void __init ek_add_device_udc(void)

{

	if (machine_is_usb_a9260())

	if (machine_is_usb_a9260() || machine_is_usb_a9g20())

		ek_udc_data.vbus_pin = AT91_PIN_PC5;



	at91_add_device_udc(&ek_udc_data);

}



#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4

static int at91_mmc_spi_init(struct device *dev,

	irqreturn_t (*detect_int)(int, void *), void *data)

{

	/* Configure Interrupt pin as input, no pull-up */

	at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);

	return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,

		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,

		"mmc-spi-detect", data);

}



static void at91_mmc_spi_exit(struct device *dev, void *data)

{

	free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);

}



static struct mmc_spi_platform_data at91_mmc_spi_pdata = {

	.init = at91_mmc_spi_init,

	.exit = at91_mmc_spi_exit,

	.detect_delay = 100, /* msecs */

};

#endif



/*

 * SPI devices.

 */

static struct spi_board_info ek_spi_devices[] = {

static struct spi_board_info usb_a9263_spi_devices[] = {

#if !defined(CONFIG_MMC_AT91)

	{	/* DataFlash chip */

		.modalias	= "mtd_dataflash",
@@ -96,10 +122,25 @@ static struct spi_board_info ek_spi_devices[] = { 
#endif

};



void ek_add_device_spi(void)

static struct spi_board_info usb_a9g20_spi_devices[] = {

#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

	{

		.modalias = "mmc_spi",

		.max_speed_hz = 20000000,	/* max spi clock (SCK) speed in HZ */

		.bus_num = 1,

		.chip_select = 0,

		.platform_data = &at91_mmc_spi_pdata,

		.mode = SPI_MODE_3,

	},

#endif

};



static void __init ek_add_device_spi(void)

{

	if (machine_is_usb_a9263())

		at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));

		at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));

	else if (machine_is_usb_a9g20())

		at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));

}



/*
@@ -110,9 +151,9 @@ static struct at91_eth_data __initdata ek_macb_data = { 
	.is_rmii	= 1,

};



void ek_add_device_eth(void)

static void __init ek_add_device_eth(void)

{

	if (machine_is_usb_a9260())

	if (machine_is_usb_a9260() || machine_is_usb_a9g20())

		ek_macb_data.phy_irq_pin = AT91_PIN_PA31;



	at91_add_device_eth(&ek_macb_data);
@@ -123,19 +164,29 @@ void ek_add_device_eth(void) 
 */

static struct mtd_partition __initdata ek_nand_partition[] = {

	{

		.name	= "Uboot & Kernel",

		.name	= "barebox",

		.offset	= 0,

		.size	= SZ_16M,

	},

	{

		.name	= "Root FS",

		.size	= 3 * SZ_128K,

	}, {

		.name	= "bareboxenv",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= 120 * SZ_1M,

	},

	{

		.name	= "FS",

		.size	= SZ_128K,

	}, {

		.name	= "bareboxenv2",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= SZ_128K,

	}, {

		.name	= "kernel",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= 4 * SZ_1M,

	}, {

		.name	= "rootfs",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= 120 * SZ_1M,

	}, {

		.name	= "data",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= MTDPART_SIZ_FULL,

	}

};
@@ -154,7 +205,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { 
	.partition_info	= nand_partitions,

};



static struct sam9_smc_config __initdata ek_nand_smc_config = {

static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 1,

	.ncs_write_setup	= 0,
@@ -172,15 +223,36 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { 
	.tdf_cycles		= 2,

};



static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 2,

	.ncs_write_setup	= 0,

	.nwe_setup		= 2,



	.ncs_read_pulse		= 4,

	.nrd_pulse		= 4,

	.ncs_write_pulse	= 4,

	.nwe_pulse		= 4,



	.read_cycle		= 7,

	.write_cycle		= 7,



	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,

	.tdf_cycles		= 3,

};



static void __init ek_add_device_nand(void)

{

	if (machine_is_usb_a9260()) {

	if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {

		ek_nand_data.rdy_pin	= AT91_PIN_PC13;

		ek_nand_data.enable_pin	= AT91_PIN_PC14;

	}



	/* configure chip-select 3 (NAND) */

	sam9_smc_configure(3, &ek_nand_smc_config);

	if (machine_is_usb_a9g20())

		sam9_smc_configure(3, &usb_a9g20_nand_smc_config);

	else

		sam9_smc_configure(3, &usb_a9260_nand_smc_config);



	at91_add_device_nand(&ek_nand_data);

}
@@ -237,15 +309,20 @@ static struct gpio_led ek_leds[] = { 
	}

};



void ek_add_device_leds(void)

static struct i2c_board_info __initdata ek_i2c_devices[] = {

	{

	if (machine_is_usb_a9260())

		I2C_BOARD_INFO("rv3029c2", 0x56),

	},

};



static void __init ek_add_device_leds(void)

{

	if (machine_is_usb_a9260() || machine_is_usb_a9g20())

		ek_leds[0].active_low = 0;



	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));

}





static void __init ek_board_init(void)

{

	/* Serial */
@@ -260,16 +337,23 @@ static void __init ek_board_init(void) 
	ek_add_device_eth();

	/* NAND */

	ek_add_device_nand();

	/* I2C */

	at91_add_device_i2c(NULL, 0);

	/* Push Buttons */

	ek_add_device_buttons();

	/* LEDs */

	ek_add_device_leds();



	if (machine_is_usb_a9g20()) {

		/* I2C */

		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));

	} else {

		/* I2C */

		at91_add_device_i2c(NULL, 0);

		/* shutdown controller, wakeup button (5 msec low) */

	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW

		at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)

				| AT91_SHDW_WKMODE0_LOW

				| AT91_SHDW_RTTWKEN);

	}

}



MACHINE_START(USB_A9263, "CALAO USB_A9263")

	/* Maintainer: calao-systems */
@@ -288,3 +372,12 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") 
	.init_irq	= at91_init_irq_default,

	.init_machine	= ek_board_init,

MACHINE_END



MACHINE_START(USB_A9G20, "CALAO USB_A92G0")

	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */

	.timer		= &at91sam926x_timer,

	.map_io		= at91_map_io,

	.init_early	= ek_init_early,

	.init_irq	= at91_init_irq_default,

	.init_machine	= ek_board_init,

MACHINE_END

arch/arm/mach-at91/include/mach/timex.h

+5 −0
Original line number Diff line number Diff line
@@ -64,7 +64,12 @@ 


#elif defined(CONFIG_ARCH_AT91SAM9G20)



#if defined(CONFIG_MACH_USB_A9G20)

#define AT91SAM9_MASTER_CLOCK	133000000

#else

#define AT91SAM9_MASTER_CLOCK	132096000

#endif



#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)



#elif defined(CONFIG_ARCH_AT91SAM9G45)

CRA Git | Maintained and supported by SUSTech CRA and CCSE