Commit 0963670a authored by Linus Walleij's avatar Linus Walleij
Browse files

gpio: fix up SPI submenu 



- Relax dependencies on SPI_MASTER for drivers in the SPI menu
  that already has this dependency.
- Move out the expander that would be hidden for I2C access if
  SPI_MASTER was not selected. Tentatively create a separate
  menu for this.
- Move the ZX SoC driver to memory-mapped drivers, this must be
  a mistake and only worked because the system has an SPI master
  enabled at the same time.

Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 269a46f8

drivers/gpio/Kconfig

+18 −16
Original line number Diff line number Diff line
@@ -483,6 +483,12 @@ config GPIO_ZYNQ 
	help

	  Say yes here to support Xilinx Zynq GPIO controller.



config GPIO_ZX

	bool "ZTE ZX GPIO support"

	select GPIOLIB_IRQCHIP

	help

	  Say yes here to support the GPIO device on ZTE ZX SoCs.



endmenu



menu "Port-mapped I/O GPIO drivers"
@@ -984,7 +990,7 @@ menu "SPI GPIO expanders" 


config GPIO_74X164

	tristate "74x164 serial-in/parallel-out 8-bits shift register"

	depends on SPI_MASTER && OF

	depends on OF

	help

	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs

	  shift registers. This driver can be used to provide access
@@ -992,32 +998,28 @@ config GPIO_74X164 


config GPIO_MAX7301

	tristate "Maxim MAX7301 GPIO expander"

	depends on SPI_MASTER

	select GPIO_MAX730X

	help

	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.



config GPIO_MCP23S08

	tristate "Microchip MCP23xxx I/O expander"

	depends on (SPI_MASTER && !I2C) || I2C

	help

	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017

	  I/O expanders.

	  This provides a GPIO interface supporting inputs and outputs.

	  The I2C versions of the chips can be used as interrupt-controller.



config GPIO_MC33880

	tristate "Freescale MC33880 high-side/low-side switch"

	depends on SPI_MASTER

	help

	  SPI driver for Freescale MC33880 high-side/low-side switch.

	  This provides GPIO interface supporting inputs and outputs.



config GPIO_ZX

	bool "ZTE ZX GPIO support"

	select GPIOLIB_IRQCHIP

endmenu



menu "SPI or I2C GPIO expanders"

	depends on (SPI_MASTER && !I2C) || I2C



config GPIO_MCP23S08

	tristate "Microchip MCP23xxx I/O expander"

	help

	  Say yes here to support the GPIO device on ZTE ZX SoCs.

	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017

	  I/O expanders.

	  This provides a GPIO interface supporting inputs and outputs.

	  The I2C versions of the chips can be used as interrupt-controller.



endmenu

CRA Git | Maintained and supported by SUSTech CRA and CCSE