USB: Implement support for EHCI with big endian MMIO (083522d7) · Commits · 戴 / test

drivers/usb/host/Kconfig

+5 −0

Original line number	Diff line number	Diff line
		@@ -67,6 +67,11 @@ config USB_EHCI_TT_NEWSCHED

		If unsure, say N.

		config USB_EHCI_BIG_ENDIAN_MMIO
		bool
		depends on USB_EHCI_HCD
		default n

		config USB_ISP116X_HCD
		tristate "ISP116X HCD support"
		depends on USB

drivers/usb/host/ehci-dbg.c

+12 −12

Original line number	Diff line number	Diff line
		@@ -43,7 +43,7 @@
		*/
		static void dbg_hcs_params (struct ehci_hcd ehci, char label)
		{
		u32 params = readl (&ehci->caps->hcs_params);
		u32 params = ehci_readl(ehci, &ehci->caps->hcs_params);

		ehci_dbg (ehci,
		"%s hcs_params 0x%x dbg=%d%s cc=%d pcc=%d%s%s ports=%d\n",
		@@ -87,7 +87,7 @@ static inline void dbg_hcs_params (struct ehci_hcd ehci, char label) {}
		* */
		static void dbg_hcc_params (struct ehci_hcd ehci, char label)
		{
		u32 params = readl (&ehci->caps->hcc_params);
		u32 params = ehci_readl(ehci, &ehci->caps->hcc_params);

		if (HCC_ISOC_CACHE (params)) {
		ehci_dbg (ehci,
		@@ -653,7 +653,7 @@ show_registers (struct class_device class_dev, char buf)
		}

		/* Capability Registers */
		i = HC_VERSION(readl (&ehci->caps->hc_capbase));
		i = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
		temp = scnprintf (next, size,
		"bus %s, device %s (driver " DRIVER_VERSION ")\n"
		"%s\n"
		@@ -673,7 +673,7 @@ show_registers (struct class_device class_dev, char buf)
		unsigned count = 256/4;

		pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
		offset = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
		offset = HCC_EXT_CAPS (ehci_readl(ehci, &ehci->caps->hcc_params));
		while (offset && count--) {
		pci_read_config_dword (pdev, offset, &cap);
		switch (cap & 0xff) {
		@@ -704,50 +704,50 @@ show_registers (struct class_device class_dev, char buf)
		#endif

		// FIXME interpret both types of params
		i = readl (&ehci->caps->hcs_params);
		i = ehci_readl(ehci, &ehci->caps->hcs_params);
		temp = scnprintf (next, size, "structural params 0x%08x\n", i);
		size -= temp;
		next += temp;

		i = readl (&ehci->caps->hcc_params);
		i = ehci_readl(ehci, &ehci->caps->hcc_params);
		temp = scnprintf (next, size, "capability params 0x%08x\n", i);
		size -= temp;
		next += temp;

		/* Operational Registers */
		temp = dbg_status_buf (scratch, sizeof scratch, label,
		readl (&ehci->regs->status));
		ehci_readl(ehci, &ehci->regs->status));
		temp = scnprintf (next, size, fmt, temp, scratch);
		size -= temp;
		next += temp;

		temp = dbg_command_buf (scratch, sizeof scratch, label,
		readl (&ehci->regs->command));
		ehci_readl(ehci, &ehci->regs->command));
		temp = scnprintf (next, size, fmt, temp, scratch);
		size -= temp;
		next += temp;

		temp = dbg_intr_buf (scratch, sizeof scratch, label,
		readl (&ehci->regs->intr_enable));
		ehci_readl(ehci, &ehci->regs->intr_enable));
		temp = scnprintf (next, size, fmt, temp, scratch);
		size -= temp;
		next += temp;

		temp = scnprintf (next, size, "uframe %04x\n",
		readl (&ehci->regs->frame_index));
		ehci_readl(ehci, &ehci->regs->frame_index));
		size -= temp;
		next += temp;

		for (i = 1; i <= HCS_N_PORTS (ehci->hcs_params); i++) {
		temp = dbg_port_buf (scratch, sizeof scratch, label, i,
		readl (&ehci->regs->port_status [i - 1]));
		ehci_readl(ehci, &ehci->regs->port_status [i - 1]));
		temp = scnprintf (next, size, fmt, temp, scratch);
		size -= temp;
		next += temp;
		if (i == HCS_DEBUG_PORT(ehci->hcs_params) && ehci->debug) {
		temp = scnprintf (next, size,
		" debug control %08x\n",
		readl (&ehci->debug->control));
		ehci_readl(ehci, &ehci->debug->control));
		size -= temp;
		next += temp;
		}

drivers/usb/host/ehci-fsl.c

+4 −4

Original line number	Diff line number	Diff line
		@@ -177,7 +177,7 @@ static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
		case FSL_USB2_PHY_NONE:
		break;
		}
		writel(portsc, &ehci->regs->port_status[port_offset]);
		ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
		}

		static void mpc83xx_usb_setup(struct usb_hcd *hcd)
		@@ -214,7 +214,7 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
		}

		/* put controller in host mode. */
		writel(0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
		ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
		out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
		out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
		out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
		@@ -238,12 +238,12 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
		/* EHCI registers start at offset 0x100 */
		ehci->caps = hcd->regs + 0x100;
		ehci->regs = hcd->regs + 0x100 +
		HC_LENGTH(readl(&ehci->caps->hc_capbase));
		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
		dbg_hcs_params(ehci, "reset");
		dbg_hcc_params(ehci, "reset");

		/* cache this readonly data; minimize chip reads */
		ehci->hcs_params = readl(&ehci->caps->hcs_params);
		ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);

		retval = ehci_halt(ehci);
		if (retval)

drivers/usb/host/ehci-hcd.c

+50 −42

Original line number	Diff line number	Diff line
		@@ -157,12 +157,13 @@ MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
		* before driver shutdown. But it also seems to be caused by bugs in cardbus
		* bridge shutdown: shutting down the bridge before the devices using it.
		*/
		static int handshake (void __iomem *ptr, u32 mask, u32 done, int usec)
		static int handshake (struct ehci_hcd ehci, void __iomem ptr,
		u32 mask, u32 done, int usec)
		{
		u32 result;

		do {
		result = readl (ptr);
		result = ehci_readl(ehci, ptr);
		if (result == ~(u32)0) /* card removed */
		return -ENODEV;
		result &= mask;
		@@ -177,18 +178,19 @@ static int handshake (void __iomem *ptr, u32 mask, u32 done, int usec)
		/* force HC to halt state from unknown (EHCI spec section 2.3) */
		static int ehci_halt (struct ehci_hcd *ehci)
		{
		u32 temp = readl (&ehci->regs->status);
		u32 temp = ehci_readl(ehci, &ehci->regs->status);

		/* disable any irqs left enabled by previous code */
		writel (0, &ehci->regs->intr_enable);
		ehci_writel(ehci, 0, &ehci->regs->intr_enable);

		if ((temp & STS_HALT) != 0)
		return 0;

		temp = readl (&ehci->regs->command);
		temp = ehci_readl(ehci, &ehci->regs->command);
		temp &= ~CMD_RUN;
		writel (temp, &ehci->regs->command);
		return handshake (&ehci->regs->status, STS_HALT, STS_HALT, 16 * 125);
		ehci_writel(ehci, temp, &ehci->regs->command);
		return handshake (ehci, &ehci->regs->status,
		STS_HALT, STS_HALT, 16 * 125);
		}

		/* put TDI/ARC silicon into EHCI mode */
		@@ -198,23 +200,24 @@ static void tdi_reset (struct ehci_hcd *ehci)
		u32 tmp;

		reg_ptr = (u32 __iomem )(((u8 __iomem )ehci->regs) + 0x68);
		tmp = readl (reg_ptr);
		tmp = ehci_readl(ehci, reg_ptr);
		tmp \|= 0x3;
		writel (tmp, reg_ptr);
		ehci_writel(ehci, tmp, reg_ptr);
		}

		/* reset a non-running (STS_HALT == 1) controller */
		static int ehci_reset (struct ehci_hcd *ehci)
		{
		int retval;
		u32 command = readl (&ehci->regs->command);
		u32 command = ehci_readl(ehci, &ehci->regs->command);

		command \|= CMD_RESET;
		dbg_cmd (ehci, "reset", command);
		writel (command, &ehci->regs->command);
		ehci_writel(ehci, command, &ehci->regs->command);
		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
		ehci->next_statechange = jiffies;
		retval = handshake (&ehci->regs->command, CMD_RESET, 0, 250 * 1000);
		retval = handshake (ehci, &ehci->regs->command,
		CMD_RESET, 0, 250 * 1000);

		if (retval)
		return retval;
		@@ -236,21 +239,21 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
		#endif

		/* wait for any schedule enables/disables to take effect */
		temp = readl (&ehci->regs->command) << 10;
		temp = ehci_readl(ehci, &ehci->regs->command) << 10;
		temp &= STS_ASS \| STS_PSS;
		if (handshake (&ehci->regs->status, STS_ASS \| STS_PSS,
		if (handshake (ehci, &ehci->regs->status, STS_ASS \| STS_PSS,
		temp, 16 * 125) != 0) {
		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
		return;
		}

		/* then disable anything that's still active */
		temp = readl (&ehci->regs->command);
		temp = ehci_readl(ehci, &ehci->regs->command);
		temp &= ~(CMD_ASE \| CMD_IAAD \| CMD_PSE);
		writel (temp, &ehci->regs->command);
		ehci_writel(ehci, temp, &ehci->regs->command);

		/* hardware can take 16 microframes to turn off ... */
		if (handshake (&ehci->regs->status, STS_ASS \| STS_PSS,
		if (handshake (ehci, &ehci->regs->status, STS_ASS \| STS_PSS,
		0, 16 * 125) != 0) {
		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
		return;
		@@ -277,11 +280,11 @@ static void ehci_watchdog (unsigned long param)

		/* lost IAA irqs wedge things badly; seen with a vt8235 */
		if (ehci->reclaim) {
		u32 status = readl (&ehci->regs->status);
		u32 status = ehci_readl(ehci, &ehci->regs->status);
		if (status & STS_IAA) {
		ehci_vdbg (ehci, "lost IAA\n");
		COUNT (ehci->stats.lost_iaa);
		writel (STS_IAA, &ehci->regs->status);
		ehci_writel(ehci, STS_IAA, &ehci->regs->status);
		ehci->reclaim_ready = 1;
		}
		}
		@@ -309,7 +312,7 @@ ehci_shutdown (struct usb_hcd *hcd)
		(void) ehci_halt (ehci);

		/* make BIOS/etc use companion controller during reboot */
		writel (0, &ehci->regs->configured_flag);
		ehci_writel(ehci, 0, &ehci->regs->configured_flag);
		}

		static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
		@@ -379,11 +382,11 @@ static void ehci_stop (struct usb_hcd *hcd)
		ehci_quiesce (ehci);

		ehci_reset (ehci);
		writel (0, &ehci->regs->intr_enable);
		ehci_writel(ehci, 0, &ehci->regs->intr_enable);
		spin_unlock_irq(&ehci->lock);

		/* let companion controllers work when we aren't */
		writel (0, &ehci->regs->configured_flag);
		ehci_writel(ehci, 0, &ehci->regs->configured_flag);

		remove_debug_files (ehci);

		@@ -402,7 +405,8 @@ static void ehci_stop (struct usb_hcd *hcd)
		ehci->stats.complete, ehci->stats.unlink);
		#endif

		dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
		dbg_status (ehci, "ehci_stop completed",
		ehci_readl(ehci, &ehci->regs->status));
		}

		/* one-time init, only for memory state */
		@@ -428,7 +432,7 @@ static int ehci_init(struct usb_hcd *hcd)
		return retval;

		/* controllers may cache some of the periodic schedule ... */
		hcc_params = readl(&ehci->caps->hcc_params);
		hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
		if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
		ehci->i_thresh = 8;
		else // N microframes cached
		@@ -501,8 +505,8 @@ static int ehci_run (struct usb_hcd *hcd)
		ehci_mem_cleanup(ehci);
		return retval;
		}
		writel(ehci->periodic_dma, &ehci->regs->frame_list);
		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
		ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
		ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);

		/*
		* hcc_params controls whether ehci->regs->segment must (!!!)
		@@ -516,9 +520,9 @@ static int ehci_run (struct usb_hcd *hcd)
		* Scsi_Host.highmem_io, and so forth. It's readonly to all
		* host side drivers though.
		*/
		hcc_params = readl(&ehci->caps->hcc_params);
		hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
		if (HCC_64BIT_ADDR(hcc_params)) {
		writel(0, &ehci->regs->segment);
		ehci_writel(ehci, 0, &ehci->regs->segment);
		#if 0
		// this is deeply broken on almost all architectures
		if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
		@@ -531,7 +535,7 @@ static int ehci_run (struct usb_hcd *hcd)
		// root hub will detect new devices (why?); NEC doesn't
		ehci->command &= ~(CMD_LRESET\|CMD_IAAD\|CMD_PSE\|CMD_ASE\|CMD_RESET);
		ehci->command \|= CMD_RUN;
		writel (ehci->command, &ehci->regs->command);
		ehci_writel(ehci, ehci->command, &ehci->regs->command);
		dbg_cmd (ehci, "init", ehci->command);

		/*
		@@ -541,17 +545,18 @@ static int ehci_run (struct usb_hcd *hcd)
		* and there's no companion controller unless maybe for USB OTG.)
		*/
		hcd->state = HC_STATE_RUNNING;
		writel (FLAG_CF, &ehci->regs->configured_flag);
		readl (&ehci->regs->command); /* unblock posted writes */
		ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
		ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */

		temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
		temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
		ehci_info (ehci,
		"USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
		temp >> 8, temp & 0xff, DRIVER_VERSION,
		ignore_oc ? ", overcurrent ignored" : "");

		writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
		ehci_writel(ehci, INTR_MASK,
		&ehci->regs->intr_enable); /* Turn On Interrupts */

		/* GRR this is run-once init(), being done every time the HC starts.
		* So long as they're part of class devices, we can't do it init()
		@@ -572,7 +577,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)

		spin_lock (&ehci->lock);

		status = readl (&ehci->regs->status);
		status = ehci_readl(ehci, &ehci->regs->status);

		/* e.g. cardbus physical eject */
		if (status == ~(u32) 0) {
		@@ -587,8 +592,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
		}

		/* clear (just) interrupts */
		writel (status, &ehci->regs->status);
		readl (&ehci->regs->command); /* unblock posted write */
		ehci_writel(ehci, status, &ehci->regs->status);
		ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
		bh = 0;

		#ifdef EHCI_VERBOSE_DEBUG
		@@ -619,11 +624,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
		unsigned i = HCS_N_PORTS (ehci->hcs_params);

		/* resume root hub? */
		if (!(readl(&ehci->regs->command) & CMD_RUN))
		if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN))
		usb_hcd_resume_root_hub(hcd);

		while (i--) {
		int pstatus = readl (&ehci->regs->port_status [i]);
		int pstatus = ehci_readl(ehci,
		&ehci->regs->port_status [i]);

		if (pstatus & PORT_OWNER)
		continue;
		@@ -643,14 +649,15 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
		/* PCI errors [4.15.2.4] */
		if (unlikely ((status & STS_FATAL) != 0)) {
		/* bogus "fatal" IRQs appear on some chips... why? */
		status = readl (&ehci->regs->status);
		dbg_cmd (ehci, "fatal", readl (&ehci->regs->command));
		status = ehci_readl(ehci, &ehci->regs->status);
		dbg_cmd (ehci, "fatal", ehci_readl(ehci,
		&ehci->regs->command));
		dbg_status (ehci, "fatal", status);
		if (status & STS_HALT) {
		ehci_err (ehci, "fatal error\n");
		dead:
		ehci_reset (ehci);
		writel (0, &ehci->regs->configured_flag);
		ehci_writel(ehci, 0, &ehci->regs->configured_flag);
		/* generic layer kills/unlinks all urbs, then
		* uses ehci_stop to clean up the rest
		*/
		@@ -873,7 +880,8 @@ done:
		static int ehci_get_frame (struct usb_hcd *hcd)
		{
		struct ehci_hcd *ehci = hcd_to_ehci (hcd);
		return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
		return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
		ehci->periodic_size;
		}

		/-------------------------------------------------------------------------/

drivers/usb/host/ehci-hub.c

+63 −55

Original line number	Diff line number	Diff line
		@@ -47,7 +47,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
		ehci_quiesce (ehci);
		hcd->state = HC_STATE_QUIESCING;
		}
		ehci->command = readl (&ehci->regs->command);
		ehci->command = ehci_readl(ehci, &ehci->regs->command);
		if (ehci->reclaim)
		ehci->reclaim_ready = 1;
		ehci_work(ehci);
		@@ -60,7 +60,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
		ehci->bus_suspended = 0;
		while (port--) {
		u32 __iomem *reg = &ehci->regs->port_status [port];
		u32 t1 = readl (reg) & ~PORT_RWC_BITS;
		u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
		u32 t2 = t1;

		/* keep track of which ports we suspend */
		@@ -79,7 +79,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
		if (t1 != t2) {
		ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
		port + 1, t1, t2);
		writel (t2, reg);
		ehci_writel(ehci, t2, reg);
		}
		}

		@@ -92,8 +92,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
		mask = INTR_MASK;
		if (!device_may_wakeup(&hcd->self.root_hub->dev))
		mask &= ~STS_PCD;
		writel(mask, &ehci->regs->intr_enable);
		readl(&ehci->regs->intr_enable);
		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
		ehci_readl(ehci, &ehci->regs->intr_enable);

		ehci->next_statechange = jiffies + msecs_to_jiffies(10);
		spin_unlock_irq (&ehci->lock);
		@@ -118,26 +118,26 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
		* the last user of the controller, not reset/pm hardware keeping
		* state we gave to it.
		*/
		temp = readl(&ehci->regs->intr_enable);
		temp = ehci_readl(ehci, &ehci->regs->intr_enable);
		ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");

		/* at least some APM implementations will try to deliver
		* IRQs right away, so delay them until we're ready.
		*/
		writel(0, &ehci->regs->intr_enable);
		ehci_writel(ehci, 0, &ehci->regs->intr_enable);

		/* re-init operational registers */
		writel(0, &ehci->regs->segment);
		writel(ehci->periodic_dma, &ehci->regs->frame_list);
		writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
		ehci_writel(ehci, 0, &ehci->regs->segment);
		ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
		ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);

		/* restore CMD_RUN, framelist size, and irq threshold */
		writel (ehci->command, &ehci->regs->command);
		ehci_writel(ehci, ehci->command, &ehci->regs->command);

		/* manually resume the ports we suspended during bus_suspend() */
		i = HCS_N_PORTS (ehci->hcs_params);
		while (i--) {
		temp = readl (&ehci->regs->port_status [i]);
		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
		temp &= ~(PORT_RWC_BITS
		\| PORT_WKOC_E \| PORT_WKDISC_E \| PORT_WKCONN_E);
		if (test_bit(i, &ehci->bus_suspended) &&
		@@ -145,20 +145,20 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
		ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
		temp \|= PORT_RESUME;
		}
		writel (temp, &ehci->regs->port_status [i]);
		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
		}
		i = HCS_N_PORTS (ehci->hcs_params);
		mdelay (20);
		while (i--) {
		temp = readl (&ehci->regs->port_status [i]);
		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
		if (test_bit(i, &ehci->bus_suspended) &&
		(temp & PORT_SUSPEND)) {
		temp &= ~(PORT_RWC_BITS \| PORT_RESUME);
		writel (temp, &ehci->regs->port_status [i]);
		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
		ehci_vdbg (ehci, "resumed port %d\n", i + 1);
		}
		}
		(void) readl (&ehci->regs->command);
		(void) ehci_readl(ehci, &ehci->regs->command);

		/* maybe re-activate the schedule(s) */
		temp = 0;
		@@ -168,14 +168,14 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
		temp \|= CMD_PSE;
		if (temp) {
		ehci->command \|= temp;
		writel (ehci->command, &ehci->regs->command);
		ehci_writel(ehci, ehci->command, &ehci->regs->command);
		}

		ehci->next_statechange = jiffies + msecs_to_jiffies(5);
		hcd->state = HC_STATE_RUNNING;

		/* Now we can safely re-enable irqs */
		writel(INTR_MASK, &ehci->regs->intr_enable);
		ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);

		spin_unlock_irq (&ehci->lock);
		return 0;
		@@ -217,7 +217,8 @@ static int check_reset_complete (
		// what happens if HCS_N_CC(params) == 0 ?
		port_status \|= PORT_OWNER;
		port_status &= ~PORT_RWC_BITS;
		writel (port_status, &ehci->regs->port_status [index]);
		ehci_writel(ehci, port_status,
		&ehci->regs->port_status [index]);

		} else
		ehci_dbg (ehci, "port %d high speed\n", index + 1);
		@@ -268,13 +269,14 @@ ehci_hub_status_data (struct usb_hcd hcd, char buf)
		/* port N changes (bit N)? */
		spin_lock_irqsave (&ehci->lock, flags);
		for (i = 0; i < ports; i++) {
		temp = readl (&ehci->regs->port_status [i]);
		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
		if (temp & PORT_OWNER) {
		/* don't report this in GetPortStatus */
		if (temp & PORT_CSC) {
		temp &= ~PORT_RWC_BITS;
		temp \|= PORT_CSC;
		writel (temp, &ehci->regs->port_status [i]);
		ehci_writel(ehci, temp,
		&ehci->regs->port_status [i]);
		}
		continue;
		}
		@@ -373,17 +375,17 @@ static int ehci_hub_control (
		if (!wIndex \|\| wIndex > ports)
		goto error;
		wIndex--;
		temp = readl (&ehci->regs->port_status [wIndex]);
		temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
		if (temp & PORT_OWNER)
		break;

		switch (wValue) {
		case USB_PORT_FEAT_ENABLE:
		writel (temp & ~PORT_PE,
		ehci_writel(ehci, temp & ~PORT_PE,
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_C_ENABLE:
		writel((temp & ~PORT_RWC_BITS) \| PORT_PEC,
		ehci_writel(ehci, (temp & ~PORT_RWC_BITS) \| PORT_PEC,
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_SUSPEND:
		@@ -396,7 +398,7 @@ static int ehci_hub_control (
		goto error;
		/* resume signaling for 20 msec */
		temp &= ~(PORT_RWC_BITS \| PORT_WAKE_BITS);
		writel (temp \| PORT_RESUME,
		ehci_writel(ehci, temp \| PORT_RESUME,
		&ehci->regs->port_status [wIndex]);
		ehci->reset_done [wIndex] = jiffies
		+ msecs_to_jiffies (20);
		@@ -407,15 +409,16 @@ static int ehci_hub_control (
		break;
		case USB_PORT_FEAT_POWER:
		if (HCS_PPC (ehci->hcs_params))
		writel (temp & ~(PORT_RWC_BITS \| PORT_POWER),
		ehci_writel(ehci,
		temp & ~(PORT_RWC_BITS \| PORT_POWER),
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_C_CONNECTION:
		writel((temp & ~PORT_RWC_BITS) \| PORT_CSC,
		ehci_writel(ehci, (temp & ~PORT_RWC_BITS) \| PORT_CSC,
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_C_OVER_CURRENT:
		writel((temp & ~PORT_RWC_BITS) \| PORT_OCC,
		ehci_writel(ehci, (temp & ~PORT_RWC_BITS) \| PORT_OCC,
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_C_RESET:
		@@ -424,7 +427,7 @@ static int ehci_hub_control (
		default:
		goto error;
		}
		readl (&ehci->regs->command); /* unblock posted write */
		ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
		break;
		case GetHubDescriptor:
		ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
		@@ -440,7 +443,7 @@ static int ehci_hub_control (
		goto error;
		wIndex--;
		status = 0;
		temp = readl (&ehci->regs->port_status [wIndex]);
		temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);

		// wPortChange bits
		if (temp & PORT_CSC)
		@@ -458,10 +461,12 @@ static int ehci_hub_control (
		ehci->reset_done [wIndex] = 0;

		/* stop resume signaling */
		temp = readl (&ehci->regs->port_status [wIndex]);
		writel (temp & ~(PORT_RWC_BITS \| PORT_RESUME),
		temp = ehci_readl(ehci,
		&ehci->regs->port_status [wIndex]);
		retval = handshake (
		ehci_writel(ehci,
		temp & ~(PORT_RWC_BITS \| PORT_RESUME),
		&ehci->regs->port_status [wIndex]);
		retval = handshake(ehci,
		&ehci->regs->port_status [wIndex],
		PORT_RESUME, 0, 2000 /* 2msec */);
		if (retval != 0) {
		@@ -480,12 +485,12 @@ static int ehci_hub_control (
		ehci->reset_done [wIndex] = 0;

		/* force reset to complete */
		writel (temp & ~(PORT_RWC_BITS \| PORT_RESET),
		ehci_writel(ehci, temp & ~(PORT_RWC_BITS \| PORT_RESET),
		&ehci->regs->port_status [wIndex]);
		/* REVISIT: some hardware needs 550+ usec to clear
		* this bit; seems too long to spin routinely...
		*/
		retval = handshake (
		retval = handshake(ehci,
		&ehci->regs->port_status [wIndex],
		PORT_RESET, 0, 750);
		if (retval != 0) {
		@@ -496,7 +501,8 @@ static int ehci_hub_control (

		/* see what we found out */
		temp = check_reset_complete (ehci, wIndex,
		readl (&ehci->regs->port_status [wIndex]));
		ehci_readl(ehci,
		&ehci->regs->port_status [wIndex]));
		}

		// don't show wPortStatus if it's owned by a companion hc
		@@ -541,7 +547,7 @@ static int ehci_hub_control (
		if (!wIndex \|\| wIndex > ports)
		goto error;
		wIndex--;
		temp = readl (&ehci->regs->port_status [wIndex]);
		temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
		if (temp & PORT_OWNER)
		break;

		@@ -555,12 +561,12 @@ static int ehci_hub_control (
		goto error;
		if (device_may_wakeup(&hcd->self.root_hub->dev))
		temp \|= PORT_WAKE_BITS;
		writel (temp \| PORT_SUSPEND,
		ehci_writel(ehci, temp \| PORT_SUSPEND,
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_POWER:
		if (HCS_PPC (ehci->hcs_params))
		writel (temp \| PORT_POWER,
		ehci_writel(ehci, temp \| PORT_POWER,
		&ehci->regs->port_status [wIndex]);
		break;
		case USB_PORT_FEAT_RESET:
		@@ -589,7 +595,8 @@ static int ehci_hub_control (
		ehci->reset_done [wIndex] = jiffies
		+ msecs_to_jiffies (50);
		}
		writel (temp, &ehci->regs->port_status [wIndex]);
		ehci_writel(ehci, temp,
		&ehci->regs->port_status [wIndex]);
		break;

		/* For downstream facing ports (these): one hub port is put
		@@ -604,13 +611,14 @@ static int ehci_hub_control (
		ehci_quiesce(ehci);
		ehci_halt(ehci);
		temp \|= selector << 16;
		writel (temp, &ehci->regs->port_status [wIndex]);
		ehci_writel(ehci, temp,
		&ehci->regs->port_status [wIndex]);
		break;

		default:
		goto error;
		}
		readl (&ehci->regs->command); /* unblock posted writes */
		ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
		break;

		default:

Admin message