can: kvaser_usb: Add support for Kvaser CAN/USB devices (080f40a6) · Commits · 戴 / test

This driver provides support for several Kvaser CAN/USB devices. Such kind of devices supports up to three CAN network interfaces. It has been tested with a Kvaser USB Leaf Light (one network interface) connected to a pch_can interface. The firmware version of the Kvaser device was 2.5.205. List of Kvaser devices supported by the driver: - Kvaser Leaf Light - Kvaser Leaf Professional HS - Kvaser Leaf SemiPro HS - Kvaser Leaf Professional LS - Kvaser Leaf Professional SWC - Kvaser Leaf Professional LIN - Kvaser Leaf SemiPro LS - Kvaser Leaf SemiPro SWC - Kvaser Memorator II HS/HS - Kvaser USBcan Professional HS/HS - Kvaser Leaf Light GI - Kvaser Leaf Professional HS (OBD-II connector) - Kvaser Memorator Professional HS/LS - Kvaser Leaf Light "China" - Kvaser BlackBird SemiPro - Kvaser USBcan R Signed-off-by:

Daniel Berglund <db@kvaser.com> Signed-off-by:

Olivier Sobrie <olivier@sobrie.be> Signed-off-by:

Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/usb/Kconfig

+29 −0

Original line number	Diff line number	Diff line
		@@ -13,6 +13,35 @@ config CAN_ESD_USB2
		This driver supports the CAN-USB/2 interface
		from esd electronic system design gmbh (http://www.esd.eu).

		config CAN_KVASER_USB
		tristate "Kvaser CAN/USB interface"
		---help---
		This driver adds support for Kvaser CAN/USB devices like Kvaser
		Leaf Light.

		The driver gives support for the following devices:
		- Kvaser Leaf Light
		- Kvaser Leaf Professional HS
		- Kvaser Leaf SemiPro HS
		- Kvaser Leaf Professional LS
		- Kvaser Leaf Professional SWC
		- Kvaser Leaf Professional LIN
		- Kvaser Leaf SemiPro LS
		- Kvaser Leaf SemiPro SWC
		- Kvaser Memorator II HS/HS
		- Kvaser USBcan Professional HS/HS
		- Kvaser Leaf Light GI
		- Kvaser Leaf Professional HS (OBD-II connector)
		- Kvaser Memorator Professional HS/LS
		- Kvaser Leaf Light "China"
		- Kvaser BlackBird SemiPro
		- Kvaser USBcan R

		If unsure, say N.

		To compile this driver as a module, choose M here: the
		module will be called kvaser_usb.

		config CAN_PEAK_USB
		tristate "PEAK PCAN-USB/USB Pro interfaces"
		---help---

drivers/net/can/usb/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -4,6 +4,7 @@

		obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
		obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
		obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
		obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/

		ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG

drivers/net/can/usb/kvaser_usb.c

0 → 100644

+1627 −0

File added.

Preview size limit exceeded, changes collapsed.

Admin message