Commit 076d022c authored by Vitaly Bordug's avatar Vitaly Bordug Committed by Paul Mackerras
Browse files

[PATCH] PPC32 8xx: support for the physmapped flash on m8xx 



Implemented more correct way to support physmapped flash on m8xx
than map in mtd.

The areas intended to contain bootloader are protected readonly.
Note that CFI and JEDEC stuff should be configured properly in order
this to work, e.g. for 885/86x CFI should support 4-chip flash interleave.
Also fixed compilation warning.

Signed-off-by: default avatarVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 0ec57e53

arch/ppc/syslib/m8xx_setup.c

+50 −0
Original line number Diff line number Diff line
@@ -34,6 +34,13 @@ 
#include <linux/seq_file.h>

#include <linux/root_dev.h>



#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)

#include <linux/mtd/partitions.h>

#include <linux/mtd/physmap.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/map.h>

#endif



#include <asm/mmu.h>

#include <asm/reg.h>

#include <asm/residual.h>
@@ -49,6 +56,34 @@ 


#include "ppc8xx_pic.h"



#ifdef CONFIG_MTD_PHYSMAP

#define MPC8xxADS_BANK_WIDTH 4

#endif



#define MPC8xxADS_U_BOOT_SIZE          0x80000

#define MPC8xxADS_FREE_AREA_OFFSET     MPC8xxADS_U_BOOT_SIZE



#if defined(CONFIG_MTD_PARTITIONS)

 /*

   NOTE: bank width and interleave relative to the installed flash

   should have been chosen within MTD_CFI_GEOMETRY options.

 */

static struct mtd_partition mpc8xxads_partitions[] = {

	{

		.name = "bootloader",

		.size = MPC8xxADS_U_BOOT_SIZE,

		.offset = 0,

		.mask_flags   = MTD_WRITEABLE,  /* force read-only */

	}, {

		.name = "User FS",

		.offset = MPC8xxADS_FREE_AREA_OFFSET

	}

};



#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0]))



#endif



static int m8xx_set_rtc_time(unsigned long time);

static unsigned long m8xx_get_rtc_time(void);

void m8xx_calibrate_decr(void);
@@ -71,6 +106,10 @@ board_init(void) 
void __init

m8xx_setup_arch(void)

{

#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)

	bd_t *binfo = (bd_t *)__res;

#endif



	/* Reset the Communication Processor Module.

	*/

	m8xx_cpm_reset();
@@ -106,6 +145,17 @@ m8xx_setup_arch(void) 
	}

#endif

#endif



#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS)

#if defined(CONFIG_MTD_PHYSMAP)

       physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize,

                                               MPC8xxADS_BANK_WIDTH, NULL);

#ifdef CONFIG_MTD_PARTITIONS

       physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num);

#endif /* CONFIG_MTD_PARTITIONS */

#endif /* CONFIG_MTD_PHYSMAP */

#endif



	board_init();

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE