Commit 06252ade authored by Amelie Delaunay's avatar Amelie Delaunay Committed by Lee Jones
Browse files

mfd: Add ST Multi-Function eXpander (STMFX) core driver 



STMicroelectronics Multi-Function eXpander (STMFX) is a slave controller
using I2C for communication with the main MCU. Main features are:
- 16 fast GPIOs individually configurable in input/output
- 8 alternate GPIOs individually configurable in input/output when other
STMFX functions are not used
- Main MCU IDD measurement
- Resistive touchscreen controller

Signed-off-by: default avatarAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent fb8c8691

drivers/mfd/Kconfig

+13 −0
Original line number Diff line number Diff line
@@ -1907,6 +1907,19 @@ config MFD_STPMIC1 
	  To compile this driver as a module, choose M here: the

	  module will be called stpmic1.



config MFD_STMFX

	tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)"

	depends on I2C

	depends on OF || COMPILE_TEST

	select MFD_CORE

	select REGMAP_I2C

	help

	  Support for the STMicroelectronics Multi-Function eXpander.



	  This driver provides common support for accessing the device,

	  additional drivers must be enabled in order to use the functionality

	  of the device.



menu "Multimedia Capabilities Port drivers"

	depends on ARCH_SA1100

drivers/mfd/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -246,4 +246,4 @@ obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o 
obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o

obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o

obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o

obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o

drivers/mfd/stmfx.c

0 → 100644
+545 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Driver for STMicroelectronics Multi-Function eXpander (STMFX) core

 *

 * Copyright (C) 2019 STMicroelectronics

 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.

 */

#include <linux/bitfield.h>

#include <linux/i2c.h>

#include <linux/interrupt.h>

#include <linux/irq.h>

#include <linux/mfd/core.h>

#include <linux/mfd/stmfx.h>

#include <linux/module.h>

#include <linux/regulator/consumer.h>



static bool stmfx_reg_volatile(struct device *dev, unsigned int reg)

{

	switch (reg) {

	case STMFX_REG_SYS_CTRL:

	case STMFX_REG_IRQ_SRC_EN:

	case STMFX_REG_IRQ_PENDING:

	case STMFX_REG_IRQ_GPI_PENDING1:

	case STMFX_REG_IRQ_GPI_PENDING2:

	case STMFX_REG_IRQ_GPI_PENDING3:

	case STMFX_REG_GPIO_STATE1:

	case STMFX_REG_GPIO_STATE2:

	case STMFX_REG_GPIO_STATE3:

	case STMFX_REG_IRQ_GPI_SRC1:

	case STMFX_REG_IRQ_GPI_SRC2:

	case STMFX_REG_IRQ_GPI_SRC3:

	case STMFX_REG_GPO_SET1:

	case STMFX_REG_GPO_SET2:

	case STMFX_REG_GPO_SET3:

	case STMFX_REG_GPO_CLR1:

	case STMFX_REG_GPO_CLR2:

	case STMFX_REG_GPO_CLR3:

		return true;

	default:

		return false;

	}

}



static bool stmfx_reg_writeable(struct device *dev, unsigned int reg)

{

	return (reg >= STMFX_REG_SYS_CTRL);

}



static const struct regmap_config stmfx_regmap_config = {

	.reg_bits	= 8,

	.reg_stride	= 1,

	.val_bits	= 8,

	.max_register	= STMFX_REG_MAX,

	.volatile_reg	= stmfx_reg_volatile,

	.writeable_reg	= stmfx_reg_writeable,

	.cache_type	= REGCACHE_RBTREE,

};



static const struct resource stmfx_pinctrl_resources[] = {

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_GPIO),

};



static const struct resource stmfx_idd_resources[] = {

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_IDD),

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_ERROR),

};



static const struct resource stmfx_ts_resources[] = {

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_DET),

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_NE),

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_TH),

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_FULL),

	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_OVF),

};



static struct mfd_cell stmfx_cells[] = {

	{

		.of_compatible = "st,stmfx-0300-pinctrl",

		.name = "stmfx-pinctrl",

		.resources = stmfx_pinctrl_resources,

		.num_resources = ARRAY_SIZE(stmfx_pinctrl_resources),

	},

	{

		.of_compatible = "st,stmfx-0300-idd",

		.name = "stmfx-idd",

		.resources = stmfx_idd_resources,

		.num_resources = ARRAY_SIZE(stmfx_idd_resources),

	},

	{

		.of_compatible = "st,stmfx-0300-ts",

		.name = "stmfx-ts",

		.resources = stmfx_ts_resources,

		.num_resources = ARRAY_SIZE(stmfx_ts_resources),

	},

};



static u8 stmfx_func_to_mask(u32 func)

{

	u8 mask = 0;



	if (func & STMFX_FUNC_GPIO)

		mask |= STMFX_REG_SYS_CTRL_GPIO_EN;



	if ((func & STMFX_FUNC_ALTGPIO_LOW) || (func & STMFX_FUNC_ALTGPIO_HIGH))

		mask |= STMFX_REG_SYS_CTRL_ALTGPIO_EN;



	if (func & STMFX_FUNC_TS)

		mask |= STMFX_REG_SYS_CTRL_TS_EN;



	if (func & STMFX_FUNC_IDD)

		mask |= STMFX_REG_SYS_CTRL_IDD_EN;



	return mask;

}



int stmfx_function_enable(struct stmfx *stmfx, u32 func)

{

	u32 sys_ctrl;

	u8 mask;

	int ret;



	ret = regmap_read(stmfx->map, STMFX_REG_SYS_CTRL, &sys_ctrl);

	if (ret)

		return ret;



	/*

	 * IDD and TS have priority in STMFX FW, so if IDD and TS are enabled,

	 * ALTGPIO function is disabled by STMFX FW. If IDD or TS is enabled,

	 * the number of aGPIO available decreases. To avoid GPIO management

	 * disturbance, abort IDD or TS function enable in this case.

	 */

	if (((func & STMFX_FUNC_IDD) || (func & STMFX_FUNC_TS)) &&

	    (sys_ctrl & STMFX_REG_SYS_CTRL_ALTGPIO_EN)) {

		dev_err(stmfx->dev, "ALTGPIO function already enabled\n");

		return -EBUSY;

	}



	/* If TS is enabled, aGPIO[3:0] cannot be used */

	if ((func & STMFX_FUNC_ALTGPIO_LOW) &&

	    (sys_ctrl & STMFX_REG_SYS_CTRL_TS_EN)) {

		dev_err(stmfx->dev, "TS in use, aGPIO[3:0] unavailable\n");

		return -EBUSY;

	}



	/* If IDD is enabled, aGPIO[7:4] cannot be used */

	if ((func & STMFX_FUNC_ALTGPIO_HIGH) &&

	    (sys_ctrl & STMFX_REG_SYS_CTRL_IDD_EN)) {

		dev_err(stmfx->dev, "IDD in use, aGPIO[7:4] unavailable\n");

		return -EBUSY;

	}



	mask = stmfx_func_to_mask(func);



	return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, mask);

}

EXPORT_SYMBOL_GPL(stmfx_function_enable);



int stmfx_function_disable(struct stmfx *stmfx, u32 func)

{

	u8 mask = stmfx_func_to_mask(func);



	return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, 0);

}

EXPORT_SYMBOL_GPL(stmfx_function_disable);



static void stmfx_irq_bus_lock(struct irq_data *data)

{

	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);



	mutex_lock(&stmfx->lock);

}



static void stmfx_irq_bus_sync_unlock(struct irq_data *data)

{

	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);



	regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, stmfx->irq_src);



	mutex_unlock(&stmfx->lock);

}



static void stmfx_irq_mask(struct irq_data *data)

{

	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);



	stmfx->irq_src &= ~BIT(data->hwirq % 8);

}



static void stmfx_irq_unmask(struct irq_data *data)

{

	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);



	stmfx->irq_src |= BIT(data->hwirq % 8);

}



static struct irq_chip stmfx_irq_chip = {

	.name			= "stmfx-core",

	.irq_bus_lock		= stmfx_irq_bus_lock,

	.irq_bus_sync_unlock	= stmfx_irq_bus_sync_unlock,

	.irq_mask		= stmfx_irq_mask,

	.irq_unmask		= stmfx_irq_unmask,

};



static irqreturn_t stmfx_irq_handler(int irq, void *data)

{

	struct stmfx *stmfx = data;

	unsigned long n, pending;

	u32 ack;

	int ret;



	ret = regmap_read(stmfx->map, STMFX_REG_IRQ_PENDING,

			  (u32 *)&pending);

	if (ret)

		return IRQ_NONE;



	/*

	 * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR

	 * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3

	 */

	ack = pending & ~BIT(STMFX_REG_IRQ_SRC_EN_GPIO);

	if (ack) {

		ret = regmap_write(stmfx->map, STMFX_REG_IRQ_ACK, ack);

		if (ret)

			return IRQ_NONE;

	}



	for_each_set_bit(n, &pending, STMFX_REG_IRQ_SRC_MAX)

		handle_nested_irq(irq_find_mapping(stmfx->irq_domain, n));



	return IRQ_HANDLED;

}



static int stmfx_irq_map(struct irq_domain *d, unsigned int virq,

			 irq_hw_number_t hwirq)

{

	irq_set_chip_data(virq, d->host_data);

	irq_set_chip_and_handler(virq, &stmfx_irq_chip, handle_simple_irq);

	irq_set_nested_thread(virq, 1);

	irq_set_noprobe(virq);



	return 0;

}



static void stmfx_irq_unmap(struct irq_domain *d, unsigned int virq)

{

	irq_set_chip_and_handler(virq, NULL, NULL);

	irq_set_chip_data(virq, NULL);

}



static const struct irq_domain_ops stmfx_irq_ops = {

	.map	= stmfx_irq_map,

	.unmap	= stmfx_irq_unmap,

};



static void stmfx_irq_exit(struct i2c_client *client)

{

	struct stmfx *stmfx = i2c_get_clientdata(client);

	int hwirq;



	for (hwirq = 0; hwirq < STMFX_REG_IRQ_SRC_MAX; hwirq++)

		irq_dispose_mapping(irq_find_mapping(stmfx->irq_domain, hwirq));



	irq_domain_remove(stmfx->irq_domain);

}



static int stmfx_irq_init(struct i2c_client *client)

{

	struct stmfx *stmfx = i2c_get_clientdata(client);

	u32 irqoutpin = 0, irqtrigger;

	int ret;



	stmfx->irq_domain = irq_domain_add_simple(stmfx->dev->of_node,

						  STMFX_REG_IRQ_SRC_MAX, 0,

						  &stmfx_irq_ops, stmfx);

	if (!stmfx->irq_domain) {

		dev_err(stmfx->dev, "Failed to create IRQ domain\n");

		return -EINVAL;

	}



	if (!of_property_read_bool(stmfx->dev->of_node, "drive-open-drain"))

		irqoutpin |= STMFX_REG_IRQ_OUT_PIN_TYPE;



	irqtrigger = irq_get_trigger_type(client->irq);

	if ((irqtrigger & IRQ_TYPE_EDGE_RISING) ||

	    (irqtrigger & IRQ_TYPE_LEVEL_HIGH))

		irqoutpin |= STMFX_REG_IRQ_OUT_PIN_POL;



	ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin);

	if (ret)

		return ret;



	ret = devm_request_threaded_irq(stmfx->dev, client->irq,

					NULL, stmfx_irq_handler,

					irqtrigger | IRQF_ONESHOT,

					"stmfx", stmfx);

	if (ret)

		stmfx_irq_exit(client);



	return ret;

}



static int stmfx_chip_reset(struct stmfx *stmfx)

{

	int ret;



	ret = regmap_write(stmfx->map, STMFX_REG_SYS_CTRL,

			   STMFX_REG_SYS_CTRL_SWRST);

	if (ret)

		return ret;



	msleep(STMFX_BOOT_TIME_MS);



	return ret;

}



static int stmfx_chip_init(struct i2c_client *client)

{

	struct stmfx *stmfx = i2c_get_clientdata(client);

	u32 id;

	u8 version[2];

	int ret;



	stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd");

	ret = PTR_ERR_OR_ZERO(stmfx->vdd);

	if (ret == -ENODEV) {

		stmfx->vdd = NULL;

	} else if (ret == -EPROBE_DEFER) {

		return ret;

	} else if (ret) {

		dev_err(&client->dev, "Failed to get VDD regulator: %d\n", ret);

		return ret;

	}



	if (stmfx->vdd) {

		ret = regulator_enable(stmfx->vdd);

		if (ret) {

			dev_err(&client->dev, "VDD enable failed: %d\n", ret);

			return ret;

		}

	}



	ret = regmap_read(stmfx->map, STMFX_REG_CHIP_ID, &id);

	if (ret) {

		dev_err(&client->dev, "Error reading chip ID: %d\n", ret);

		goto err;

	}



	/*

	 * Check that ID is the complement of the I2C address:

	 * STMFX I2C address follows the 7-bit format (MSB), that's why

	 * client->addr is shifted.

	 *

	 * STMFX_I2C_ADDR|       STMFX         |        Linux

	 *   input pin   | I2C device address  | I2C device address

	 *---------------------------------------------------------

	 *       0       | b: 1000 010x h:0x84 |       0x42

	 *       1       | b: 1000 011x h:0x86 |       0x43

	 */

	if (FIELD_GET(STMFX_REG_CHIP_ID_MASK, ~id) != (client->addr << 1)) {

		dev_err(&client->dev, "Unknown chip ID: %#x\n", id);

		ret = -EINVAL;

		goto err;

	}



	ret = regmap_bulk_read(stmfx->map, STMFX_REG_FW_VERSION_MSB,

			       version, ARRAY_SIZE(version));

	if (ret) {

		dev_err(&client->dev, "Error reading FW version: %d\n", ret);

		goto err;

	}



	dev_info(&client->dev, "STMFX id: %#x, fw version: %x.%02x\n",

		 id, version[0], version[1]);



	ret = stmfx_chip_reset(stmfx);

	if (ret) {

		dev_err(&client->dev, "Failed to reset chip: %d\n", ret);

		goto err;

	}



	return 0;



err:

	if (stmfx->vdd)

		return regulator_disable(stmfx->vdd);



	return ret;

}



static int stmfx_chip_exit(struct i2c_client *client)

{

	struct stmfx *stmfx = i2c_get_clientdata(client);



	regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0);

	regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0);



	if (stmfx->vdd)

		return regulator_disable(stmfx->vdd);



	return 0;

}



static int stmfx_probe(struct i2c_client *client,

		       const struct i2c_device_id *id)

{

	struct device *dev = &client->dev;

	struct stmfx *stmfx;

	int ret;



	stmfx = devm_kzalloc(dev, sizeof(*stmfx), GFP_KERNEL);

	if (!stmfx)

		return -ENOMEM;



	i2c_set_clientdata(client, stmfx);



	stmfx->dev = dev;



	stmfx->map = devm_regmap_init_i2c(client, &stmfx_regmap_config);

	if (IS_ERR(stmfx->map)) {

		ret = PTR_ERR(stmfx->map);

		dev_err(dev, "Failed to allocate register map: %d\n", ret);

		return ret;

	}



	mutex_init(&stmfx->lock);



	ret = stmfx_chip_init(client);

	if (ret) {

		if (ret == -ETIMEDOUT)

			return -EPROBE_DEFER;

		return ret;

	}



	if (client->irq < 0) {

		dev_err(dev, "Failed to get IRQ: %d\n", client->irq);

		ret = client->irq;

		goto err_chip_exit;

	}



	ret = stmfx_irq_init(client);

	if (ret)

		goto err_chip_exit;



	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,

				   stmfx_cells, ARRAY_SIZE(stmfx_cells), NULL,

				   0, stmfx->irq_domain);

	if (ret)

		goto err_irq_exit;



	return 0;



err_irq_exit:

	stmfx_irq_exit(client);

err_chip_exit:

	stmfx_chip_exit(client);



	return ret;

}



static int stmfx_remove(struct i2c_client *client)

{

	stmfx_irq_exit(client);



	return stmfx_chip_exit(client);

}



#ifdef CONFIG_PM_SLEEP

static int stmfx_suspend(struct device *dev)

{

	struct stmfx *stmfx = dev_get_drvdata(dev);

	int ret;



	ret = regmap_raw_read(stmfx->map, STMFX_REG_SYS_CTRL,

			      &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));

	if (ret)

		return ret;



	ret = regmap_raw_read(stmfx->map, STMFX_REG_IRQ_OUT_PIN,

			      &stmfx->bkp_irqoutpin,

			      sizeof(stmfx->bkp_irqoutpin));

	if (ret)

		return ret;



	if (stmfx->vdd)

		return regulator_disable(stmfx->vdd);



	return 0;

}



static int stmfx_resume(struct device *dev)

{

	struct stmfx *stmfx = dev_get_drvdata(dev);

	int ret;



	if (stmfx->vdd) {

		ret = regulator_enable(stmfx->vdd);

		if (ret) {

			dev_err(stmfx->dev,

				"VDD enable failed: %d\n", ret);

			return ret;

		}

	}



	ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL,

			       &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));

	if (ret)

		return ret;



	ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN,

			       &stmfx->bkp_irqoutpin,

			       sizeof(stmfx->bkp_irqoutpin));

	if (ret)

		return ret;



	ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_SRC_EN,

			       &stmfx->irq_src, sizeof(stmfx->irq_src));

	if (ret)

		return ret;



	return 0;

}

#endif



static SIMPLE_DEV_PM_OPS(stmfx_dev_pm_ops, stmfx_suspend, stmfx_resume);



static const struct of_device_id stmfx_of_match[] = {

	{ .compatible = "st,stmfx-0300", },

	{},

};

MODULE_DEVICE_TABLE(of, stmfx_of_match);



static struct i2c_driver stmfx_driver = {

	.driver = {

		.name = "stmfx-core",

		.of_match_table = of_match_ptr(stmfx_of_match),

		.pm = &stmfx_dev_pm_ops,

	},

	.probe = stmfx_probe,

	.remove = stmfx_remove,

};

module_i2c_driver(stmfx_driver);



MODULE_DESCRIPTION("STMFX core driver");

MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");

MODULE_LICENSE("GPL v2");

include/linux/mfd/stmfx.h

0 → 100644
+123 −0
Original line number Diff line number Diff line 
/* SPDX-License-Identifier: GPL-2.0 */

/*

 * Copyright (C) 2019 STMicroelectronics

 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.

 */



#ifndef MFD_STMFX_H

#define MFX_STMFX_H



#include <linux/regmap.h>



/* General */

#define STMFX_REG_CHIP_ID		0x00 /* R */

#define STMFX_REG_FW_VERSION_MSB	0x01 /* R */

#define STMFX_REG_FW_VERSION_LSB	0x02 /* R */

#define STMFX_REG_SYS_CTRL		0x40 /* RW */

/* IRQ output management */

#define STMFX_REG_IRQ_OUT_PIN		0x41 /* RW */

#define STMFX_REG_IRQ_SRC_EN		0x42 /* RW */

#define STMFX_REG_IRQ_PENDING		0x08 /* R */

#define STMFX_REG_IRQ_ACK		0x44 /* RW */

/* GPIO management */

#define STMFX_REG_IRQ_GPI_PENDING1	0x0C /* R */

#define STMFX_REG_IRQ_GPI_PENDING2	0x0D /* R */

#define STMFX_REG_IRQ_GPI_PENDING3	0x0E /* R */

#define STMFX_REG_GPIO_STATE1		0x10 /* R */

#define STMFX_REG_GPIO_STATE2		0x11 /* R */

#define STMFX_REG_GPIO_STATE3		0x12 /* R */

#define STMFX_REG_IRQ_GPI_SRC1		0x48 /* RW */

#define STMFX_REG_IRQ_GPI_SRC2		0x49 /* RW */

#define STMFX_REG_IRQ_GPI_SRC3		0x4A /* RW */

#define STMFX_REG_IRQ_GPI_EVT1		0x4C /* RW */

#define STMFX_REG_IRQ_GPI_EVT2		0x4D /* RW */

#define STMFX_REG_IRQ_GPI_EVT3		0x4E /* RW */

#define STMFX_REG_IRQ_GPI_TYPE1		0x50 /* RW */

#define STMFX_REG_IRQ_GPI_TYPE2		0x51 /* RW */

#define STMFX_REG_IRQ_GPI_TYPE3		0x52 /* RW */

#define STMFX_REG_IRQ_GPI_ACK1		0x54 /* RW */

#define STMFX_REG_IRQ_GPI_ACK2		0x55 /* RW */

#define STMFX_REG_IRQ_GPI_ACK3		0x56 /* RW */

#define STMFX_REG_GPIO_DIR1		0x60 /* RW */

#define STMFX_REG_GPIO_DIR2		0x61 /* RW */

#define STMFX_REG_GPIO_DIR3		0x62 /* RW */

#define STMFX_REG_GPIO_TYPE1		0x64 /* RW */

#define STMFX_REG_GPIO_TYPE2		0x65 /* RW */

#define STMFX_REG_GPIO_TYPE3		0x66 /* RW */

#define STMFX_REG_GPIO_PUPD1		0x68 /* RW */

#define STMFX_REG_GPIO_PUPD2		0x69 /* RW */

#define STMFX_REG_GPIO_PUPD3		0x6A /* RW */

#define STMFX_REG_GPO_SET1		0x6C /* RW */

#define STMFX_REG_GPO_SET2		0x6D /* RW */

#define STMFX_REG_GPO_SET3		0x6E /* RW */

#define STMFX_REG_GPO_CLR1		0x70 /* RW */

#define STMFX_REG_GPO_CLR2		0x71 /* RW */

#define STMFX_REG_GPO_CLR3		0x72 /* RW */



#define STMFX_REG_MAX			0xB0



/* MFX boot time is around 10ms, so after reset, we have to wait this delay */

#define STMFX_BOOT_TIME_MS 10



/* STMFX_REG_CHIP_ID bitfields */

#define STMFX_REG_CHIP_ID_MASK		GENMASK(7, 0)



/* STMFX_REG_SYS_CTRL bitfields */

#define STMFX_REG_SYS_CTRL_GPIO_EN	BIT(0)

#define STMFX_REG_SYS_CTRL_TS_EN	BIT(1)

#define STMFX_REG_SYS_CTRL_IDD_EN	BIT(2)

#define STMFX_REG_SYS_CTRL_ALTGPIO_EN	BIT(3)

#define STMFX_REG_SYS_CTRL_SWRST	BIT(7)



/* STMFX_REG_IRQ_OUT_PIN bitfields */

#define STMFX_REG_IRQ_OUT_PIN_TYPE	BIT(0) /* 0-OD 1-PP */

#define STMFX_REG_IRQ_OUT_PIN_POL	BIT(1) /* 0-active LOW 1-active HIGH */



/* STMFX_REG_IRQ_(SRC_EN/PENDING/ACK) bit shift */

enum stmfx_irqs {

	STMFX_REG_IRQ_SRC_EN_GPIO = 0,

	STMFX_REG_IRQ_SRC_EN_IDD,

	STMFX_REG_IRQ_SRC_EN_ERROR,

	STMFX_REG_IRQ_SRC_EN_TS_DET,

	STMFX_REG_IRQ_SRC_EN_TS_NE,

	STMFX_REG_IRQ_SRC_EN_TS_TH,

	STMFX_REG_IRQ_SRC_EN_TS_FULL,

	STMFX_REG_IRQ_SRC_EN_TS_OVF,

	STMFX_REG_IRQ_SRC_MAX,

};



enum stmfx_functions {

	STMFX_FUNC_GPIO		= BIT(0), /* GPIO[15:0] */

	STMFX_FUNC_ALTGPIO_LOW	= BIT(1), /* aGPIO[3:0] */

	STMFX_FUNC_ALTGPIO_HIGH = BIT(2), /* aGPIO[7:4] */

	STMFX_FUNC_TS		= BIT(3),

	STMFX_FUNC_IDD		= BIT(4),

};



/**

 * struct stmfx_ddata - STMFX MFD structure

 * @device:		device reference used for logs

 * @map:		register map

 * @vdd:		STMFX power supply

 * @irq_domain:		IRQ domain

 * @lock:		IRQ bus lock

 * @irq_src:		cache of IRQ_SRC_EN register for bus_lock

 * @bkp_sysctrl:	backup of SYS_CTRL register for suspend/resume

 * @bkp_irqoutpin:	backup of IRQ_OUT_PIN register for suspend/resume

 */

struct stmfx {

	struct device *dev;

	struct regmap *map;

	struct regulator *vdd;

	struct irq_domain *irq_domain;

	struct mutex lock; /* IRQ bus lock */

	u8 irq_src;

#ifdef CONFIG_PM

	u8 bkp_sysctrl;

	u8 bkp_irqoutpin;

#endif

};



int stmfx_function_enable(struct stmfx *stmfx, u32 func);

int stmfx_function_disable(struct stmfx *stmfx, u32 func);

#endif

CRA Git | Maintained and supported by SUSTech CRA and CCSE