Commit 05ea893c authored by Dave Airlie's avatar Dave Airlie
Browse files

Merge remote branch 'anholt/drm-intel-next' into drm-next 

* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...
parents 26481fb1 a7c54278

Documentation/DocBook/libata.tmpl

+16 −33
Original line number Diff line number Diff line
@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *); 
	issue of SET FEATURES - XFER MODE, and prior to operation.

	</para>

	<para>

	Called by ata_device_add() after ata_dev_identify() determines

	a device is present.

	</para>

	<para>

	This entry may be specified as NULL in ata_port_operations.

	</para>
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in 


	<sect2><title>Taskfile read/write</title>

	<programlisting>

void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);

void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);

void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);

void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);

	</programlisting>



	<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); 
	hardware registers / DMA buffers, to obtain the current set of

	taskfile register values.

	Most drivers for taskfile-based hardware (PIO or MMIO) use

	ata_tf_load() and ata_tf_read() for these hooks.

	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.

	</para>



	</sect2>



	<sect2><title>PIO data read/write</title>

	<programlisting>

void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);

void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);

	</programlisting>



	<para>

All bmdma-style drivers must implement this hook.  This is the low-level

operation that actually copies the data bytes during a PIO data

transfer.

Typically the driver

will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or

ata_mmio_data_xfer().

Typically the driver will choose one of ata_sff_data_xfer_noirq(),

ata_sff_data_xfer(), or ata_sff_data_xfer32().

	</para>



	</sect2>



	<sect2><title>ATA command execute</title>

	<programlisting>

void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);

void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);

	</programlisting>



	<para>

	causes an ATA command, previously loaded with

	->tf_load(), to be initiated in hardware.

	Most drivers for taskfile-based hardware use ata_exec_command()

	Most drivers for taskfile-based hardware use ata_sff_exec_command()

	for this hook.

	</para>
@@ -218,8 +213,8 @@ command. 


	<sect2><title>Read specific ATA shadow registers</title>

	<programlisting>

u8   (*check_status)(struct ata_port *ap);

u8   (*check_altstatus)(struct ata_port *ap);

u8   (*sff_check_status)(struct ata_port *ap);

u8   (*sff_check_altstatus)(struct ata_port *ap);

	</programlisting>



	<para>
@@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap); 
	hardware.  On some hardware, reading the Status register has

	the side effect of clearing the interrupt condition.

	Most drivers for taskfile-based hardware use

	ata_check_status() for this hook.

	</para>

	<para>

	Note that because this is called from ata_device_add(), at

	least a dummy function that clears device interrupts must be

	provided for all drivers, even if the controller doesn't

	actually have a taskfile status register.

	ata_sff_check_status() for this hook.

	</para>



	</sect2>



	<sect2><title>Select ATA device on bus</title>

	<programlisting>

void (*dev_select)(struct ata_port *ap, unsigned int device);

void (*sff_dev_select)(struct ata_port *ap, unsigned int device);

	</programlisting>



	<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); 
	</para>

	<para>

	Most drivers for taskfile-based hardware use

	ata_std_dev_select() for this hook.  Controllers which do not

	support second drives on a port (such as SATA contollers) will

	use ata_noop_dev_select().

	ata_sff_dev_select() for this hook.

	</para>



	</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *); 
	to struct ata_host_set.

	</para>

	<para>

	Most legacy IDE drivers use ata_interrupt() for the

	Most legacy IDE drivers use ata_sff_interrupt() for the

	irq_handler hook, which scans all ports in the host_set,

	determines which queued command was active (if any), and calls

	ata_host_intr(ap,qc).

	ata_sff_host_intr(ap,qc).

	</para>

	<para>

	Most legacy IDE drivers use ata_bmdma_irq_clear() for the

	Most legacy IDE drivers use ata_sff_irq_clear() for the

	irq_clear() hook, which simply clears the interrupt and error

	flags in the DMA status register.

	</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set); 
	data from port at this time.

	</para>

	<para>

	Many drivers use ata_port_stop() as this hook, which frees the

	PRD table.

	</para>

	<para>

	->host_stop() is called after all ->port_stop() calls

have completed.  The hook must finalize hardware shutdown, release DMA

and other resources, etc.

Documentation/HOWTO

+1 −1
Original line number Diff line number Diff line
@@ -234,7 +234,7 @@ process is as follows: 
    Linus, usually the patches that have already been included in the

    -next kernel for a few weeks.  The preferred way to submit big changes

    is using git (the kernel's source management tool, more information

    can be found at http://git.or.cz/) but plain patches are also just

    can be found at http://git-scm.com/) but plain patches are also just

    fine.

  - After two weeks a -rc1 kernel is released it is now possible to push

    only patches that do not include new features that could affect the

Documentation/cgroups/cgroups.txt

+1 −2
Original line number Diff line number Diff line
@@ -235,8 +235,7 @@ containing the following files describing that cgroup: 
 - cgroup.procs: list of tgids in the cgroup.  This list is not

   guaranteed to be sorted or free of duplicate tgids, and userspace

   should sort/uniquify the list if this property is required.

   Writing a tgid into this file moves all threads with that tgid into

   this cgroup.

   This is a read-only file, for now.

 - notify_on_release flag: run the release agent on exit?

 - release_agent: the path to use for release notifications (this file

   exists in the top cgroup only)

Documentation/i2c/writing-clients

+5 −0
Original line number Diff line number Diff line
@@ -74,6 +74,11 @@ structure at all. You should use this to keep device-specific data. 
	/* retrieve the value */

	void *i2c_get_clientdata(const struct i2c_client *client);



Note that starting with kernel 2.6.34, you don't have to set the `data' field

to NULL in remove() or if probe() failed anymore. The i2c-core does this

automatically on these occasions. Those are also the only times the core will

touch this field.





Accessing the client

====================

Documentation/input/elantech.txt

+4 −4
Original line number Diff line number Diff line
@@ -333,14 +333,14 @@ byte 0: 
byte 1:



   bit   7   6   5   4   3   2   1   0

        x15 x14 x13 x12 x11 x10 x9  x8

         .   .   .   .   .  x10 x9  x8



byte 2:



   bit   7   6   5   4   3   2   1   0

        x7  x6  x5  x4  x4  x2  x1  x0



         x15..x0 = absolute x value (horizontal)

         x10..x0 = absolute x value (horizontal)



byte 3:
@@ -350,14 +350,14 @@ byte 3: 
byte 4:



   bit   7   6   5   4   3   2   1   0

        y15 y14 y13 y12 y11 y10 y8  y8

         .   .   .   .   .   .  y9  y8



byte 5:



   bit   7   6   5   4   3   2   1   0

        y7  y6  y5  y4  y3  y2  y1  y0



         y15..y0 = absolute y value (vertical)

         y9..y0 = absolute y value (vertical)





4.2.2 Two finger touch

CRA Git | Maintained and supported by SUSTech CRA and CCSE