+319
−0
+5
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
This patch implements isochronous urb enqueue and interrupt handler part. When an isochronous urb is passed to xHCI driver, first check the transfer ring to guarantee there is enough room for the whole urb. Then update the start_frame and interval field of the urb. Always assume URB_ISO_ASAP is set, and never use urb->start_frame as input. The number of isoc TDs is equal to urb->number_of_packets. One isoc TD is consumed every Interval. Each isoc TD consists of an Isoch TRB chained to zero or more Normal TRBs. Call prepare_transfer for each TD to do initialization; then calculate the number of TRBs needed for each TD. If the data required by an isoc TD is physically contiguous (not crosses a page boundary), then only one isoc TRB is needed; otherwise one or more additional normal TRB shall be chained to the isoc TRB by the host. Set TRB_IOC to the last TRB of each isoc TD. Do not ring endpoint doorbell to start xHC procession until all the TDs are inserted to the endpoint transer ring. In irq handler, update urb status and actual_length, increase urb_priv->td_cnt. When all the TDs are completed(td_cnt is equal to urb_priv->length), giveback the urb to usbcore. Signed-off-by:Andiry Xu <andiry.xu@amd.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
CRA Git | Maintained and supported by SUSTech CRA and CCSE